I have a coredns pod running in kube-system namespace. I need to restart the coredns pod without downtime. I am aware that we can do delete coredns pod using below command and new coredns pod will spin up automatically.
kubectl delete pods -n kube-system -l k8s-app=kube-dns
But it is creating downtime. So I am expecting to do a restart of this coredns pod without downtime.
Usecase: I have set TTL as 1hr i.e, cache 3600. I have an external dns server where I will forward any requests to that external dns server using forward plugin. And whenever I need to get recent changes in external dns entries before TTL gets expired, I think we need to restart the coredns pod. Is there any other way to achieve this? If restart is the only way, how can I do it without downtime? It would be really helpful when someone helps me on this. Thanks in advance!
Normally, the result of this command kubectl get deployment coredns --namespace kube-system --output jsonpath='{.spec.strategy.rollingUpdate.maxUnavailable}' will return 1; means for deployment of 2 pods (typical coredns setup), pod will be replace 1 at a time, leaving the other one serving request. In this case, you can run kubectl rollout restart deployment coredns --namespace kube-system to restart without downtime, no explicitly delete or hike coredns pod count required.
I have a k3s cluster with following pods:
kube-system pod/calico-node-xxxx
kube-system pod/calico-kube-controllers-xxxxxx
kube-system pod/metrics-server-xxxxx
kube-system pod/local-path-provisioner-xxxxx
kube-system pod/coredns-xxxxx
How can I reset (stop and start the pods again) the pods either with command (kubectl maybe) or any script?
To reset a pod, you can just delete it. If it's managed by deployment (pods in your question should be), they should be recreated automatically.
kubectl delete pod <pod-name> <pod2-name> ... -n <namespace>
If the pods you want to reset, have common label, you can filter them with --selector flag
kubectl delete pods --selector=<label-name>=<label-value> -n <namespace>
However, if you changed the deployments somehow, you will need to apply the unmodified manifest.
kubectl apply -f <yaml-file>
Warning: - This will reset your whole cluster and delete all running data.
This is not the exact answer but best answer. take 1 min only.
Just uninstall by running below command
sudo /usr/local/bin/k3s-uninstall.sh
Then install a fresh cluster with below command
curl -sfL https://get.k3s.io | INSTALL_K3S_EXEC="server --disable=traefik" sh -
Then export var using below command
export KUBECONFIG=/etc/rancher/k3s/k3s.yaml
Also it may complain about some k3s config file access so
sudo chmod 444 /etc/rancher/k3s/k3s.yaml
I usually restart my applications by:
kubectl scale deployment my-app --replicas=0
Followed by:
kubectl scale deployment my-app --replicas=1
which works fine. I also have another running application but when I look at its replicaset I see:
$ kubectl get rs
NAME DESIRED CURRENT READY AGE
another-app 2 2 2 2d
So to restart that correctly I would of course need to:
kubectl scale deployment another-app --replicas=0
kubectl scale deployment another-app --replicas=2
But is there a better way to do this so I don't have to manually look at the repliasets before scaling/restarting my application (that might have replicas > 1)?
You can restart pods by using level
kubectl delete pods -l name=myLabel
You can rolling restart of all pods for a deployments, so that you don't take the service down
kubectl patch deployment your_deployment_name -p \
"{\"spec\":{\"template\":{\"metadata\":{\"annotations\":{\"date\":\"`date +'%s'`\"}}}}}"
And After kubernetes version 1.15 you can
kubectl rollout restart deployment your_deployment_name
To make changes in your current deployment you can use kubectl rollout pause deployment/YOUR_DEPLOYMENT. This way the deployment will be marked as paused and won't be reconciled by the controller. After it's paused you can make necessary changes to your configuration and then resume it by using kubectl rollout resume deployment/YOUR_DEPLOYMENT. This way it will create a new replicaset with updated configuration.
Pod with new configuration will be started and when it's in running status, pod with old configuration will be terminated.
Using this method you will be able to rollout the deployment to previous version by using:
kubectl rollout history deployment/YOUR_DEPLOYMENT
to check history of the rollouts and then execute following command to rollback:
kubectl rollout undo deployment/YOUR_DEPLOYMENT --to-revision=REVISION_NO
I have 3 nodes in kubernetes cluster. I create a daemonset and deployed it in all the 3 devices. This daemonset created 3 pods and they were successfully running. But for some reasons, one of the pod failed.
I need to know how can we restart this pod without affecting other pods in the daemon set, also without creating any other daemon set deployment?
Thanks
kubectl delete pod <podname> it will delete this one pod and Deployment/StatefulSet/ReplicaSet/DaemonSet will reschedule a new one in its place
There are other possibilities to acheive what you want:
Just use rollout command
kubectl rollout restart deployment mydeploy
You can set some environment variable which will force your deployment pods to restart:
kubectl set env deployment mydeploy DEPLOY_DATE="$(date)"
You can scale your deployment to zero, and then back to some positive value
kubectl scale deployment mydeploy --replicas=0
kubectl scale deployment mydeploy --replicas=1
Just for others reading this...
A better solution (IMHO) is to implement a liveness probe that will force the pod to restart the container if it fails the probe test.
This is a great feature K8s offers out of the box. This is auto healing.
Also look into the pod lifecycle docs.
kubectl -n <namespace> delete pods --field-selector=status.phase=Failed
I think the above command is quite useful when you want to restart 1 or more failed pods :D
And we don't need to care about name of the failed pod.
I have started pods with command
$ kubectl run busybox \
--image=busybox \
--restart=Never \
--tty \
-i \
--generator=run-pod/v1
Something went wrong, and now I can't delete this Pod.
I tried using the methods described below but the Pod keeps being recreated.
$ kubectl delete pods busybox-na3tm
pod "busybox-na3tm" deleted
$ kubectl get pods
NAME READY STATUS RESTARTS AGE
busybox-vlzh3 0/1 ContainerCreating 0 14s
$ kubectl delete pod busybox-vlzh3 --grace-period=0
$ kubectl delete pods --all
pod "busybox-131cq" deleted
pod "busybox-136x9" deleted
pod "busybox-13f8a" deleted
pod "busybox-13svg" deleted
pod "busybox-1465m" deleted
pod "busybox-14uz1" deleted
pod "busybox-15raj" deleted
pod "busybox-160to" deleted
pod "busybox-16191" deleted
$ kubectl get pods --all-namespaces
NAMESPACE NAME READY STATUS RESTARTS AGE
default busybox-c9rnx 0/1 RunContainerError 0 23s
You need to delete the deployment, which should in turn delete the pods and the replica sets https://github.com/kubernetes/kubernetes/issues/24137
To list all deployments:
kubectl get deployments --all-namespaces
Then to delete the deployment:
kubectl delete -n NAMESPACE deployment DEPLOYMENT
Where NAMESPACE is the namespace it's in, and DEPLOYMENT is the name of the deployment. If NAMESPACE is default, leave off the -n option altogether.
In some cases it could also be running due to a job or daemonset.
Check the following and run their appropriate delete command.
kubectl get jobs
kubectl get daemonsets.app --all-namespaces
kubectl get daemonsets.extensions --all-namespaces
Instead of trying to figure out whether it is a deployment, deamonset, statefulset... or what (in my case it was a replication controller that kept spanning new pods :)
In order to determine what it was that kept spanning up the image I got all the resources with this command:
kubectl get all
Of course you could also get all resources from all namespaces:
kubectl get all --all-namespaces
or define the namespace you would like to inspect:
kubectl get all -n NAMESPACE_NAME
Once I saw that the replication controller was responsible for my trouble I deleted it:
kubectl delete replicationcontroller/CONTROLLER_NAME
If your pod has name like name-xxx-yyy, it could be controlled by a replicasets.apps named name-xxx, you should delete that replicaset first before deleting the pod:
kubectl delete replicasets.apps name-xxx
Obviously something is respawning the pod. While a lot of the other answers have you looking at everything (replica sets, jobs, deployments, stateful sets, ...) to find what may be respawning the pod, you can instead just look at the pod to see what spawned it. For example do:
$ kubectl describe pod $mypod | grep 'Controlled By:'
Controlled By: ReplicaSet/foobar
This tells you exactly what created the pod. You can then go and delete that.
Look out for stateful sets as well
kubectl get sts --all-namespaces
to delete all the stateful sets in a namespace
kubectl --namespace <yournamespace> delete sts --all
to delete them one by one
kubectl --namespace ag1 delete sts mssql1
kubectl --namespace ag1 delete sts mssql2
kubectl --namespace ag1 delete sts mssql3
This will provide information about all the pods,deployments, services and jobs
in the namespace.
kubectl get pods,services,deployments,jobs
pods can either be created by deployments or jobs
kubectl delete job [job_name]
kubectl delete deployment [deployment_name]
If you delete the deployment or job then restart of the pods can be stopped.
Many answers here tells to delete a specific k8s object, but you can delete multiple objects at once, instead of one by one:
kubectl delete deployments,jobs,services,pods --all -n <namespace>
In my case, I'm running OpenShift cluster with OLM - Operator Lifecycle Manager. OLM is the one who controls the deployment, so when I deleted the deployment, it was not sufficient to stop the pods from restarting.
Only when I deleted OLM and its subscription, the deployment, services and pods were gone.
First list all k8s objects in your namespace:
$ kubectl get all -n openshift-submariner
NAME READY STATUS RESTARTS AGE
pod/submariner-operator-847f545595-jwv27 1/1 Running 0 8d
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/submariner-operator-metrics ClusterIP 101.34.190.249 <none> 8383/TCP 8d
NAME READY UP-TO-DATE AVAILABLE AGE
deployment.apps/submariner-operator 1/1 1 1 8d
NAME DESIRED CURRENT READY AGE
replicaset.apps/submariner-operator-847f545595 1 1 1 8d
OLM is not listed with get all, so I search for it specifically:
$ kubectl get olm -n openshift-submariner
NAME AGE
operatorgroup.operators.coreos.com/openshift-submariner 8d
NAME DISPLAY VERSION
clusterserviceversion.operators.coreos.com/submariner-operator Submariner 0.0.1
Now delete all objects, including OLMs, subscriptions, deployments, replica-sets, etc:
$ kubectl delete olm,svc,rs,rc,subs,deploy,jobs,pods --all -n openshift-submariner
operatorgroup.operators.coreos.com "openshift-submariner" deleted
clusterserviceversion.operators.coreos.com "submariner-operator" deleted
deployment.extensions "submariner-operator" deleted
subscription.operators.coreos.com "submariner" deleted
service "submariner-operator-metrics" deleted
replicaset.extensions "submariner-operator-847f545595" deleted
pod "submariner-operator-847f545595-jwv27" deleted
List objects again - all gone:
$ kubectl get all -n openshift-submariner
No resources found.
$ kubectl get olm -n openshift-submariner
No resources found.
After taking an interactive tutorial I ended up with a bunch of pods, services, deployments:
me#pooh ~ > kubectl get pods,services
NAME READY STATUS RESTARTS AGE
pod/kubernetes-bootcamp-5c69669756-lzft5 1/1 Running 0 43s
pod/kubernetes-bootcamp-5c69669756-n947m 1/1 Running 0 43s
pod/kubernetes-bootcamp-5c69669756-s2jhl 1/1 Running 0 43s
pod/kubernetes-bootcamp-5c69669756-v8vd4 1/1 Running 0 43s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 37s
me#pooh ~ > kubectl get deployments --all-namespaces
NAMESPACE NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE
default kubernetes-bootcamp 4 4 4 4 1h
docker compose 1 1 1 1 1d
docker compose-api 1 1 1 1 1d
kube-system kube-dns 1 1 1 1 1d
To clean up everything, delete --all worked fine:
me#pooh ~ > kubectl delete pods,services,deployments --all
pod "kubernetes-bootcamp-5c69669756-lzft5" deleted
pod "kubernetes-bootcamp-5c69669756-n947m" deleted
pod "kubernetes-bootcamp-5c69669756-s2jhl" deleted
pod "kubernetes-bootcamp-5c69669756-v8vd4" deleted
service "kubernetes" deleted
deployment.extensions "kubernetes-bootcamp" deleted
That left me with (what I think is) an empty Kubernetes cluster:
me#pooh ~ > kubectl get pods,services,deployments
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 8m
In some cases the pods will still not go away even when deleting the deployment. In that case to force delete them you can run the below command.
kubectl delete pods podname --grace-period=0 --force
When the pod is recreating automatically even after the deletion of the pod manually, then those pods have been created using the Deployment.
When you create a deployment, it automatically creates ReplicaSet and Pods. Depending upon how many replicas of your pod you mentioned in the deployment script, it will create those number of pods initially.
When you try to delete any pod manually, it will automatically create those pod again.
Yes, sometimes you need to delete the pods with force. But in this case force command doesn’t work.
Instead of removing NS you can try removing replicaSet
kubectl get rs --all-namespaces
Then delete the replicaSet
kubectl delete rs your_app_name
The root cause for the question asked was the deployment/job/replicasets spec attribute strategy->type which defines what should happen when the pod will be destroyed (either implicitly or explicitly). In my case, it was Recreate.
As per #nomad's answer, deleting the deployment/job/replicasets is the simple fix to avoid experimenting with deadly combos before messing up the cluster as a novice user.
Try the following commands to understand the behind the scene actions before jumping into debugging :
kubectl get all -A -o name
kubectl get events -A | grep <pod-name>
In my case I deployed via a YAML file like kubectl apply -f deployment.yaml and the solution appears to be to delete via kubectl delete -f deployment.yaml
Firstly list the deployments
kubectl get deployments
After that delete the deployment
kubectl delete deployment <deployment_name>
If you have a job that continues running, you need to search the job and delete it:
kubectl get job --all-namespaces | grep <name>
and
kubectl delete job <job-name>
You can do kubectl get replicasets check for old deployment based on age or time
Delete old deployment based on time if you want to delete same current running pod of application
kubectl delete replicasets <Name of replicaset>
I also faced the issue, I have used below command to delete deployment.
kubectl delete deployments DEPLOYMENT_NAME
but still pods was recreating, So I crossed check the Replica Set by using below command
kubectl get rs
then edit the replicaset to 1 to 0
kubectl edit rs REPICASET_NAME
With deployments that have stateful sets (or services, jobs, etc.) you can use this command:
This command terminates anything that runs in the specified <NAMESPACE>
kubectl -n <NAMESPACE> delete replicasets,deployments,jobs,service,pods,statefulsets --all
And forceful
kubectl -n <NAMESPACE> delete replicasets,deployments,jobs,service,pods,statefulsets --all --cascade=true --grace-period=0 --force
There is basically two ways to remove PODS
kubectl scale --replicas=0 deploy name_of_deployment.
This will set the number of replica to 0 and hence it will not restart the pods again.
Use helm to uninstall the chart which you have implemented in your pipeline.
Do not delete the deployment directly, instead use helm to uninstall the chart which will remove all objects it created.
The fastest solution for me was installing Lens IDE and removing the service under de DEPLOYMENTS tab. Just delete from this tab and the replica will be deleted too.
Best regards
Kubernetes always works in the format like:
deployments >>> replicasets >>> pods
first edit deployment with 0 replicas and then scale deployment with desired replicas(run below command).You will see new replicaset has been created and pods will also run with desired count.
*
IN-Linux:~ anuragmanikkame$ kubectl scale deploy tomcat -n
dev-namespace --replicas=2 deployment.extensions/tomcat scaled
I experienced a similar problem: after deleting the deployment (kubectl delete deploy <name>), the pods kept "Running" and where automatically re-created after deletion (kubectl delete po <name>).
It turned out that the associated replica set was not deleted automatically for some reason, and after deleting that (kubectl delete rs <name>), it was possible to delete the pods.
This has happened to me with some broken 'helm' installs. You might have a bit of a messed up deployment. If none of the previous suggestions work, look for a daemonset and delete that.
eg
kubectl get daemonset --namespace
then delete daemonset
kubectl delete daemonset --namespace <NAMESPACE> --all --force
then try to delete the pods.
kubectl delete pod --namespace <NAMESPACE> --all --force
Check if pods are gone.
kubectl get pods --all-namespaces
In my case I use these below
kubectl get all --all-namespaces
kubectl delete deployment statefulset-deploymentnament(choose your deployment name)
kubectl delete sts -n default(choose your namespace) --all
kubectl get pods --all-namespaces
Problem got resolved