So I had to delete my project and then reclone it from my repository, but when I clone down the project and I open it, other files from some time ago show in there, how is this possible?
Example this is the cloned directory:
But when I open the project, it shows this project structure:
Also it produces the following error when attempting to build the project:
Build input file cannot be found: '/Users/Development/Projects/MapGlider/Application/Utilities/Extensions.swift'. Did you forget to declare this file as an output of a script phase or custom build rule which produces it?
All help will be appreciated!
The structure of the project as you see it in Xcode is a combination of file system + information about your project in YourProject.xcodeproj/project.pbxproj file. So you have a mismatch between file system and that file, which is typically a result of inaccurate checkin (for example some changes were done directly in file system, and the project was not updated), or a bad merge (developer A did everything right, developer B, or even the same developer on a different branch, overrode those changes incorrectly).
So what you need to do is to fix those errors one by one.
Note: the steps below assume the project is in your control. If you are using some script or tool to generate the project, you will have to address those issues via that tool or script instead.
First, fix the project structure:
Make sure Inspectors on the right side in Xcode are open. Choose File inspector tab
Focus on a folder inside Xcode, and check Name, Location and Full Path of the folder. Especially notice the Full Path, if it's incorrect, change it to a correct one. Here's the example how. Repeat for all folders and files you want to have in the project
Delete all folders and files you don't want to have in the project from Xcode. For example you can delete Extensions which appears as a file in your project, while it's actually a folder. Typically while deleting you should be able to delete them from file system as well if it exists, but if not, you can double check in file system and delete files / folders from there as well.
Add folders and files missing from the project if needed. Follow Add existing files and folders to a project section in the linked page.
Once you cleaned up the project, you need to review / fix all your project targets:
To fix the Project targets
Try to build each target. If it succeeds, most likely everything is resolved (although watch out for runtime errors for resource files - so you may need to test your app to ensure nothing is missing too).
If building a target fails, you will need to see why. For example
if file is missing from the target, but you already added it to the Xcode project, you can add it to the target (see this page).
if file is missing from the target and is not visible in Xcode, go back to step 4 of the previous procedure and add those files to Xcode project, and then add them to the target
if a file is nowhere to find and is not needed, you can delete it from target. If it was needed, then... well, you have a problem and need to locate your missing code in your source repo or rewrite it.
Ack! I'm in a pickle here. An app developer friend of mine were both laid-off, when we came back and were trying to get projects up and running again one of our Projects in NetBeans won't work properly. I have the .jar file, but when I go in to re-load the project in NetBeans to makes some tweaks, the nbproject folder is totally missing (as you can see in the screen shot.)
This project hasn't been touched in at least two years and is housed on a Remote Computer, I can't just right click and restore a previous version. Is there another way to restore this project without having to totally rebuild it?
Be patient with me, I'm not all that experienced with these things. But, as you can see, the nbproject folder is just simply gone. I'd love to say when this happened, but I have no idea. I've tried to look for a previous version but there is no previous version on this remote computer. I've tried everything I can think of to restore the missing folder, now I'm trying to find out if there is a way to import the .jar and rebuild from that.
The subfolder myproject/wp-content has dissapeared from the project explorer (of course the files are still there, I can see them on windows explorer).
All the other folders and files are still showing up.
I tried deleting the project files (.settings .buildpath .project) and deleting the project on eclipse and also deleting the index on .metadata/.plugins/org.eclipse.dltk.core.index.sql.h2
What else can I do?
I'm using stock Eclipse Kepler 4.3.1 SR1 64-bit with the following add-ons:
Aptana Studio 3 Plugin 3.4.2.201308081736-7W7I57boG98RAi489ctbvKi7VXbq com.aptana.feature.studio.feature.group Aptana
ChromeDevTools SDK 0.3.9.201309080643 org.chromium.sdk.feature.group The Chromium Authors
Chromium JavaScript Remote Debugger 0.3.9.201309080643 org.chromium.debug.feature.group The Chromium Authors
Eclipse Standard/SDK 2.0.1.20130919-0803 epp.package.standard null
Line Number Ruler Fix (Eclipse Kepler 4.3) 0.0.1 de.cdhq.eclipse.linenumberfix.kepler.feature.feature.group CDHQ.de
Markdown Editor 0.2.3 markdown.editor.feature.feature.group Winterwell
Nodeclipse 0.5.0.201309080643 org.nodeclipse.feature.group Nodeclipse organization
PHP Development Tools (PDT) 3.2.0.201306051924 org.eclipse.php.feature.group Eclipse.org
Show Window in Fullscreen 1.1.0.200906152252 gr.scharf.fullscreen_feature.feature.group Michael Scharf http://michaelscharf.blogspot.com/
Word Wrap Feature 0.0.3 de.cdhq.eclipse.wordwrap.feature.feature.group CDHQ.de
[EDIT] I forgot to mention I've also tried to rebuild the project with the same results, and I've also checked explorer view filters in case something weird had happened but there are no filters set.
[EDIT 2] I deleted the Eclipse project files and the whole .metadata folder on the workspace and recreated the project. I had no problem at first, but it has happened again. I haven't touch any settings, just closed and reopened the project.
[EDIT 3] The less invasive fix by now seems to be a combination of deleting h2 database (.metadata/.plugins/org.eclipse.dltk.core.index.sql.h2 workspace folder) and deleting also the project without deleting its files which doesn't delete .build or .settings or .buildpath either, so it can be recreated without much hussle. I can avoid the problem by not closing the project (I can still close Eclipse without loosing the folder), but I still don't know what's causing it.
[EDIT 4] I updated Eclipse and plugins today to their latest versions (Now runnning Kepler 4.3.2) and the problem persists (even if I delete org.eclipse.dltk.core.index.sql.h2 and .settings, .buildpath, .project before importing the project's folder contents as a new project): I just close the project after eclipse finishes indexing it and when I reopen it wp-content doesn't show up any more (unless I force reindexing by deleting org.eclipse.dltk.core.index.sql.h2 again). I do believe this is WordPress related, since it only happens when indexing this particular WordPress deployment (maybe it's one of the plugins/theme files installed inside wp-content or something related to one of the xml files in the root folder, like sitemap.xml?).
For me this happened multiple times, on different project and different folders. Opening+closing or refreshing the project yield no success.
In my case, I have found out that this is related to the Working sets. It seems by default new subfolders and files of a project are not marked belonging to the set, so the project has a mix of old folders (included) and new folders (excluded).
There are two fixes I am aware of:
disable the working sets
Moreover, on large projects, having this mixed state working set made opening the folder structure (and other operations) very slow (3-5 seconds per level). Turning off the working set filter made it instantaneous.
edit the active working set and check the project's checkbox (which will check all subfolders).
This happens to me all the time. I'm on OSX and my projects are accessed from a mounted samba volume. I've found that if I:
open the project in eclipse
eject the samba volume
refresh the project (it will say it cant find it and ask if you want to delete
it... click no)
remount the samba volume
refresh the eclipse project
And the missing files/folders show up. If your folders are local, maybe just moving the project folder would do the same. Unfortunately, this happens very often, and seemingly more often for wordpress projects for some reason.
I'm working with a UI project (Dynamic Web Project) and my web folder keeps dissapearing too. I didn't knew what causes that.
The only thing I knew was how to reset my projet; deleting it from workpsace and reimporting it.
I know now what causes that but I have no answer on why it actually does it. I keep refreshing my workspace because I have some compressing that is done outside eclipse and for my workspace to update them I need to refresh... somehow, the freaking Close Project option is right under the Refresh option, without prompting... and this is when my folder dissapear; when I reopen it.
Try the Import Existing Project would be my guess!
Maybe that can help you find the how of it !
Hi i solve this problem by unchecking "Group by Namespaces" in the little triangle on the top-right of the php explorer.
Issue:
My app directory in my cake php application became invisible after some time. This is bad since all of my non-cakephp framework files reside therein!
My environment:
Macosx
Eclipse Kepler
WebServer: built in macosx in Library/WebServer/Documents which is symlinked to a dir in my home directory.
PHP plugin
What I tried first:
Deleted old project from UI ( retaining files on the file system )
cd'ed to root project directory and deleted eclipse artifacts like .settings, .project, etc
Recreated php project to find that the app directory is still missing!
What worked for me:
I renamed the directory from app to app_back using the terminal/linux command rn.
Eclipse immediate saw the new dir after a clean rebuild.
I renamed the dir back to app and performed another clean rebuild.
Et Voila
It seems that by upgrading Eclipse to last version (Luna), removing the project files (.settings, .classpath and .project) and creating a new project on a new workspace, I can close and reopen the project without having the folder missing from the project explorer.
It's not the solution I wanted (and don't need any more) but it's also a solution, so I'm posting it :-)
I'm using Eclipse Indigo on Mac 10.7.4. While working, I get these periodic, annoying dialogs
'Periodic workspace save.' has encountered a problem.
Could not write metadata for '/.org.eclipse.jdt.core.external.folders'.
/Users/davea/Dropbox/workspace/.metadata/.plugins/org.eclipse.core.resources/.projects/.org.eclipse.jdt.core.external.folders/.markers.snap (No such file or directory)
I seem to be able to continue as normal, but I was wondering how I can eliminate these errors.
I had the same problem.
'Periodic workspace save.' has encountered a problem.
Could not write metadata for '/External Files'. D:\java\fuentes\.metadata\.plugins\org.eclipse.core.resources\.projects\External
Files\.markers.snap (El sistema no puede hallar la ruta especificada)
I created the folder "External Files" and it worked fine. In a few minutes the files ".markers.snap" and ".syncinfo.snap" appeared in this folder and the message didn´t appear any more.
I fixed mine by closing eclipse and deleting the whole .metadata folder inside my workspace folder.
Today I faced the same issue consistently, whenever I exit the eclipse.
While trying the above solution provided by TS.xy, the below steps got rid of this issue for now.
Switch to new workspace and close the Eclipse.
Open the Eclipse with new workspace and after that switch to the actual workspace(in which
exception occurs).
Actual workspace loaded with all my previous projects.
Now exiting the Eclipse, does not result in that exception.
Hope that this step may work for someone.
Just for another data point, none of the above helped my situation. The way I finally got past this issue is that each time Eclipse complained about some folder not being there, I went on my hard drive and created the folder. E.g. after I see
Could not write metadata for '/servers'.
C:\...\.metadata\.plugins\org.eclipse.core.resources\.projects\servers\.markers.snap (The system cannot find the path specified.)
I create the "servers" folder (not the file inside it). This gets me to the next error. I went through 3-4 of these iterations (exiting Eclipse each time to force the save) before the issues went away.
HTH, Mark
This was simple for me -
Solution
(pre) the listed directory is not present, see pic
Run Eclipse, see the error shown in pic below. Close Eclipse
Create the directory (RemoteSystemsTempFiles) where it is looking
note: ignore the items in this folder (e.g. .markers), they are auto-generated
Restart Eclipse, problem solved!
Example Problem Message
Not sure why this took me so long to resolve, but quite easy now, and quite obvious in retrospect! ;)...
Using Ubuntu, got the same issue
I noticed that the owner of some of the directories in
~/workspace/.metadata/.plugins/ ...etc...
was root
changed owner to me and the error stopped happening.
Looks like the same sort of issue may be caused by multiple causes.
Close the Eclipse , Clear the .metadata folder completely.. Start Eclipse & Import the necessary project once again if your project references are deleted..
The solution that work for me is the following:
Delete .metadata folder
Restart eclipse
Solved it by setting workspace on a local folder, and set data from import project, from existing resources.
I encountered the same problem , my resolution was to rename the the folder name under the workspace folder. i.e. com.ibm.collaboration.realtime.alertmanager.embedded was renamed to com.ibm.collaboration.realtime.alertmanager.2embeddedxx and rebuilt my project.
In my case, because I've accidentally deleted my workspace folder, and I observed the 'Periodic workspace save has encountered a problem". To solve this issue, I just simply create a new workspace and load all my projects to the new one. Hope you can solve your problem by doing the same thing.
I also ran into this problem. My situation was a little different. I was using 'working sets' to group my projects inside of eclipse. What I had done was attempt to delete a project and received errors while deleting. Ignoring the errors I removed the project from my working set and thus didn't see that I even had the project anymore. When I received my error I didn't think to look through my package explorer with 'projects', opposed to working sets, as my top view. After switching to a top level view of projects I found the project that was half deleted and was able to delete its contents from both my workspace and the hard drive.
I haven't had the error since.
I had gotten a little too aggressive about removing some directories in my project area when I was running out of disk space, and deleted this directory. Eclipse can leave some huge core files if it crashes in your workspace directories, (I had 35 gig of them) so it's worth taking a look there in your workspaces occasionally.
Anyway, as per the problem I tried the 'create a directory' approach. And it worked.
I was also seeing this error when I closed Eclipse by the way, not only after the 'periodic save'. So the exit/restart was also part of this.
Note that the last item on the directory path specified in the error message is a file -- not a directory, so don't get confused here. Probably worth checking that the directory permissions are created correctly as well (as the other projects in the workspace I think).
Obviously this is a bug in the Eclipse code base, (creating the full directory path under the file that is being created), but had I not deleted it in the first place, I would not have caused it in the first place.
I have the same problem since yesterday. Yesterday, I fixed it by creating a new workspace and reimporting the projects. It seemed to work well, but today it started again.
So, today I created the folder and the file manually and gave the full permissions -rwxrwxrwx.
Seems to work again...
Close Eclipse. Open RemoteSystemsTempFiles folder in Workspace, and clear inside this folder. Again open eclipse and close, warn about .project. Press Ok, then open Eclipse.
Solved my problem that.
I ran into this problem today after they switched our anti-virus software to Kaspersky.
In my case, the platform is Windows 7. My workspace is stored on mapped network drive. The strange thing is that, even though this appears to be a permission issue, I could manipulate files and folders at the same level as the inaccessible file without incident. So far, the only two workarounds are to move the workspace to the local drive or to uninstall Kaspersky. Removing and re-installing Kaspersky without the firewall feature did not do the trick.
I will update this answer if and when we find a more accommodating solution, though I expect that will involve adjusting the anti-virus software, not Eclipse.
In my case, the drive I was storing my workspace on had become full downloading SDK updates full and I just needed to clear some space on it.
This happened to me because i deleted one of the resources files inside the .metadata folder in my workspace.
After trying all methods, deleting the .metadata folder in my workspace worked.
Infact, this nuke option seems to work when there are a lot of issues related to eclipse bugs. One such example is working-sets. Working-sets are extremely buggy(but useful) and it is there that most of my eclipse problems start.
Hope this helps someone.
I solved the problem switching the workspace.
Go to File (Switch workspace)
Select the destination and create a folder named Workspace
Run a Hello World and close Eclipse (notice that Eclipse creates the folder RemoteSystemsTempFiles automatically)
now copy all your projects into the new folder Workspace
Open Eclipse and if necessary (sometimes Eclipse does not show the projects) import all of them (go to File/ Open projects from File System)
After you exit the eclipse, there would be an specific failed reason.
Mine is that the DISK IS FULL so the eclipse can't write into it anymore.
Agree with #J-Dizzle,
I am a beginner in web-development and had a hard time solving this today.
Had similar problems when I was creating a SpringBoot project in STS.
Tried most of the solutions mentioned but they didn't work.
Tried removing .metadata folder and re-building my springboot project but still nothing worked.
NOTE : I had multiple workspace in STS and this error occurred after migrating a project from one workspace to another.
Solution : All you need to do is restart your eclipse/STS IDE and it will work just fine.
I have lost files mysteriously a few times from my Eclipse workspace folder, and previously I assumed that I must have deleted them, but this time I know for sure that I didn't.
I entered a folder for a Java project. I listed the files. There were several text files. I then opened one in gedit to look at it. As far as I remember, I then did something in libreoffice Calc (to a spreadsheet file in a completely separate location), then I made some changes to the Java file in Eclipse. It would then have been automatically compiled. I then went back to the terminal to execute the program, but it wouldn't run. Listing the files shows that the reason it wouldn't run is that all the text files have disappeared and so has one of the .jar files (called stanford-parser.jar) but not another. I've searched my computer for these files and I can confirm they've gone.
A screenshot from my terminal illustrates this.
Can anyone help me to understand how this is happened, so I can avoid it happening again? Could compilation delete the files?
You seem to be storing source files in the bin directory of your Eclipse project, which is probably the target directory used by Eclipse to put the compiled classes. Store your sources in the source folder. The target folder is completeley deleted by Eclipse each time the project is cleaned up.
Note that non .java files stored in the source directory are automatically copied to the target directory by Eclipse. They're considered as resources that must be available at runtime in the compiled application.