I'm looking for a solution that would allow us to have separate themes in the built docs through rtd, based on urls. The project is github-hosted, so we're using the Webhook integration there for rtd.
Basically, we'd like to have slug.readthedocs.io use a default, and have a custom domain through rtd, i.e. docs.ourdomain.org, use a theme styled to match our site.
on_rtd, it seems, is True whenever rtd builds the docs, so that's likely not useful, but please correct me if I'm wrong.
Perhaps multiple Webhooks? Some sphinx magic I haven't discovered yet?
Considering using branches or tags, but that just seems a bit much, and would, I believe, call for multiple project-naming on rtd. Though, again, please correct me if I'm wrong.
At the moment, we've implemented our site theming, and simply let that be in place for both, but ideally, we hope to have the slug.readthedocs.io site be more generic and in-line with the readthedocs.io feel.
At the moment, Read the Docs doesn't support multiple themes for a given repo/branch.
There are at least a couple of approaches available here.
1) Use branches to host alternative docs. Read The Docs has an example project illustrating this approach here:
Read the Docs Sphinx Theme Examples
-- [Github Repository]
2) Use sub-projects.
Neither of these really addresses the use case in my question directly, but they do offer a sort alternative approach to multiple themes.
Related
I’m building a super simple website with 5 pages and I want a CMS that allows me to change the text and the pictures in a couple of them.
In the past I used wordpress, but it has way too many features that i don’t need in this case.
I’ve been trying to learn gatsby.js so I would like to build it on that, but trying to see how to source from Netlify-CMS I started facing an overwhelming amount of information which I'm not sure I need.
Any tips?
Thanks!
M
Netlify has a built in CMS, and it's compatible with Gatsby! You can find examples online. It should be good for smaller sites, but for larger projects, I really like Prismic.io. Contentful is another popular one, but it's a bit pricier than prismic.
Edit: reread your comment about sourcing from Netlify. Netlify is not a "source" plug in in Gatsby. You use a local file +markdown source, and do the configuration for netlify, which adds an admin interface at an endpoint. You configure your data models in the interface, create login, etc. Then, when you submit changes, it modifies files in your connected git repo, so the local file + remark will make the data available in the graphql queries.
In the end I used Forestry.io, a good simple solution that did exactly what I needed in combination with Jekyll.
I want to run an A/B-test or an experiment for whole part of the site. For example on my /blog/ page, where one variation would have a newsletter form and other variation a free ebook download button.
The problem is that I have to use a full URL path for the experiments, for example /blog/2013/article/1?var=1 and /blog/2013/article/1?var=2 With this method I would need create a new experiment for each blog post. This is impossible.
Any tips on how to approach this?
It's possible, but the documentation is lacking.
When you choose your variation URLs, you need to use relative instead of http://. This let's you use query parameters to define the variations, instead of the full URL. In your example, you would define your original page as:
http: //www.example.com/blog/2013/article/1
and your variation URLs would be ?var=1, var=2, etc. using relative as the option in the dropdown (instead of http:// or https://).
Here's the not-so-clear documentation on using relative URLs for your variations:
https://support.google.com/analytics/answer/2664470?hl=en&ref_topic=1745208
One important thing to remember is that if you're doing it this way, you need to include the content experiment code on every "original" page.
There's also another way to have even more control over serving the variation pages and controlling the experiment using the Content Experiments JavScript API. This is a relatively new feature - you can see the developer documentation about this here:
https://developers.google.com/analytics/devguides/collection/gajs/experiments
I am not sure this is possible. You might look at a more robust yet simple to use tool like Visual Website Optimizer or Optimizely.
Is there a built-in way to add tags to content in a similar way as with WordPress when using ExpressionEngine?
No, there's not an EE native equivalent to WP's tags. For something similar you need to go into the 3rd party market. Here are a couple of options:
Tagger, free & actively maintained & supported (support requires a "developer" license of $50
Tag, commercial at ~$60
Of these two I've only used Tagger. It got the job done nicely but I can't compare it to "Tag" since I haven't used it. There's another one called Taggable but I don't believe it's actively maintained or updated any more. (I would like to it but StackOverflow won't let me add more than 2 links until my rep increases.)
I've used both Tag and Tagger, mentioned by Erik. I have found for my needs Tag is more that enough to do the job. Tagger adds some higher level functions, but I didn't find I needed them in most cases.
I'd probably go with one of the two add-ons already listed though, to be thorough, there is also Taggable which Erik did mentioned though, couldn't link to it:
https://github.com/jamierumbelow/taggable
I'm currently using Solr with Terms Component and Jquery Autosuggest which works quiet good. However, this construct is limited to one autosuggest word (it autocompletes only the first word). Is it possible to implement a Google like autosuggest with multiple words/terms so i can autocomplete multiple words?
I just wrote a blog post about different ways to make auto complete suggestions with Solr. It's basically a comparison of some different strategies, check it out, it might help.
If you want to make multiple terms suggestions, it turns out you should use, as already mentioned in the other answer you got, the Suggester component available in Solr starting from the 3.1 version. Since it has some limitations, you can also have a look at the ShingleFilterFactory, which generates token NGrams. It creates combination of tokens as a single token, that's useful to suggest multiple words.
You can also use SpellCheckComponent for better auto complete suggests.
See http://wiki.apache.org/solr/Suggester for details.
Edit:
Refer here for solr5 and above
Check this out, it might help
http://www.lucidimagination.com/blog/2009/09/08/auto-suggest-from-popular-queries-using-edgengrams/
I worked out the same task, finally got solved using TermsComponent with multiple fields. check this link. http://lucene.472066.n3.nabble.com/auto-completion-search-with-solr-using-NGrams-in-SOLR-td3998559i20.html
I'm just starting to evaluate joomla CMS as a tool to build out my personal site. I'd like to manage multiple sites/domains with one copy of joomla on one host. so I'll own mysite.com and myothersite.com, which will both point to the same host/joomla code. If I do this I need to be able to set which domain/site the content I add shows up on. For some sites the content will be on both for others it will be on only one. What would be ideal it to have some kind of filtering mechanism so I don't have to manually set where the content goes.
What would be ideal is for me to set tags on the content and each site can specify which taged content to show.
My last requirement is that I be able to have different pages on each site.
Is this possible or am I asking too much from a "free" CMS?
Thanks all
I don't know if there's a component that achieves what you're describing here. I use a multi-language component in some of my sites that shows translations, but it doesn't "suppress" articles that doesn't have references to a translation: it just says "No translations to this article". I know you're not asking for translations methods, but I think the Joomfish way of selecting content based in a chosen language would be what you wanted, but not based in languages, just domains.
The only component I know it would be able to suppress articles based in pre defined parameters (in its case the language), is the Joomfish's "Table Localization Plugin", but you need to be a Joomfish silver member paying $60 to Joomfish's developers.
You could write a component(see here for plugin documentation), that analyzing the domain, would suppress articles that shouldn't appear in that specific domain. But I think it's going yo be a lot of work. You would learn a lot of Joomla's architecture, though.
How Joomla displays its content (output) is controlled entirely by parameters. So if you can control what parameters are loading, you can create multiple displays per host
However, that may be overkill in this case. You can just easily hack your template. Just make it load a different menu for siteA and siteB. (The host is set in $_SERVER['HTTP_HOST'])
The menu on siteA could have a tagging component item, set to display articles tagged siteA.com. The siteB will have the same for its domain.
While there are extensions that will do what you describe (http://extensions.joomla.org/extensions/core-enhancements/multiple-sites), Joomla is really designed for one site at a time. I've done setups where I use the same codebase for Joomla and manage it with version control, but I always end up launching multiple sites with individual databases.
However, I don't know of any CMS that inherently allows you to share articles across instances while keeping the data centralized. You may be looking at an extension (or your own customization) regardless of which platform you pick.
We had a similar problem with needing to share content across multiple Joomla! sites so we developed this extension: http://extensions.joomla.org/extension/simple-sharing
It is not very robust in terms of what it can share but it does let you share Articles across multiple sites and choose which sites and categories those articles get published into. I hope it works for you.
Thanks!