Trying to install ChezScheme-9.5.2.tar.gz on Ubuntu 16.04 LTS on Codeanywhere. During sudo make command, get error message failed because uuid/uuid.h is missing. How do I get uuid/uuid.h in a location where $ sudo make can find it?
Turns out there were additional missing files, so did the following:
$ sudo apt install uuid-dev libncurses5-dev libncursesw5-dev libx11-dev
The make still fails, but not because of missing files. I believe the 512MB ram is too small.
In order to answer your question "What was your error message?" I've attempted to duplicate what happened. Think I've done so and here is the error message:
compiling cpnanopass.ss with output to cpnanopass.a6le
Mf-base:487: recipe for target 'bootall' failed
make[4]: *** [bootall] Killed
Mf-base:164: recipe for target 'allx' failed
make[3]: *** [allx] Error 2
Mf-base:181: recipe for target 'bootstrap' failed
make[2]: *** [bootstrap] Error 2
Makefile:20: recipe for target 'build' failed
make[1]: *** [build] Error 2
Makefile:19: recipe for target 'build' failed
make: *** [build] Error 2
cabox#Python_Lua:~/workspace/ChezScheme-9.5.2$
First, had to do '$ sudo apt-get install uuid-dev' because 'apt install' does something different than 'apt-get install', which got uuid.h installed.
Related
I'm trying to install Nominatim 3.4.1 on Ubuntu 20.04 and PostgreSQL 12, so I'm following the official instructions from here, the issue is when I execute make, I have this error:
[ 79%] Built target osm2pgsql_lib
[ 79%] Built target osm2pgsql
[ 79%] Running external makefile /usr/lib/postgresql/12/lib/pgxs/src/makefiles/pgxs.mk
/srv/nominatim/Nominatim-3.4.0/module/Makefile:11: warning: overriding recipe for target 'install'
/usr/lib/postgresql/12/lib/pgxs/src/makefiles/pgxs.mk:241: warning: ignoring old recipe for target 'install'
/srv/nominatim/Nominatim-3.4.0/module/nominatim.c:1:10: fatal error: postgres.h: No such file or directory
1 | #include "postgres.h"
| ^~~~~~~~~~~~
compilation terminated.
make[3]: *** [<builtin>: nominatim.o] Error 1
make[2]: *** [module/CMakeFiles/nominatim_lib.dir/build.make:61: /srv/nominatim/Nominatim-3.4.0/module/dummy] Error 2
make[1]: *** [CMakeFiles/Makefile2:1908: module/CMakeFiles/nominatim_lib.dir/all] Error 2
make: *** [Makefile:141: all] Error 2
first lines of nominatim.c file:
#include "postgres.h"
#include "fmgr.h"
I've tried find / -name "postgres.h" and find / -name "fmgr.h" and there is no such files.
I'm almost sure that the problem is that PostgreSQL 12 removed this files, changed the names or something similar, and Nominatim 3.1.4 are not aware of that change. I'd like not to downgrade PostgreSQL to solve this unless that is the only possible solution, also I don't know if a downgrade solve the issue.
on my case this got solved by reinstalling postgres sudo apt install postgresql-server-dev-12 postgresql-12-postgis-3 \ postgresql-contrib-12 postgresql-12-postgis-3-scripts
While compiling the dpdk 17.04 version, i'm getting following error at the end.
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/octeontx
== Build app
== Build app/test-pmd
LD testpmd
/usr/bin/ld: cannot find -lnuma
collect2: error: ld returned 1 exit status
/home/root1/dpdk/dpdk-stable-17.08.1/mk/rte.app.mk:280: recipe for target 'testpmd' failed
make[5]: *** [testpmd] Error 1
/home/root1/dpdk/dpdk-stable-17.08.1/mk/rte.subdir.mk:63: recipe for target 'test-pmd' failed
make[4]: *** [test-pmd] Error 2
/home/root1/dpdk/dpdk-stable-17.08.1/mk/rte.sdkbuild.mk:76: recipe for target 'app' failed
make[3]: *** [app] Error 2
/home/root1/dpdk/dpdk-stable-17.08.1/mk/rte.sdkroot.mk:128: recipe for target 'all' failed
make[2]: *** [all] Error 2
/home/root1/dpdk/dpdk-stable-17.08.1/mk/rte.sdkinstall.mk:85: recipe for target 'pre_install' failed
make[1]: *** [pre_install] Error 2
/home/root1/dpdk/dpdk-stable-17.08.1/mk/rte.sdkroot.mk:107: recipe for target 'install' failed
make: *** [install] Error 2
Please suggest the solution.
DPDK requires libnuma-devel as described in System Requirements:
http://dpdk.org/doc/guides/linux_gsg/sys_reqs.html
Libnuma packages are optional build dependency. You can disable the same by editing the RTE_TARGET config file. So you can either install libnuma-dev package or disable on target. Please do the need ful
I'm just starting out with yocto. Reading Embedded Linux Systems with the Yocto Project. Downloaded latest rocko release with git, created a new environment and ran bitbake core-image-sato. Got the following errors during build
ERROR: binutils-native-2.29-r0 do_install: oe_runmake failed
ERROR: binutils-native-2.29-r0 do_install: Function failed: do_install (log file is located at /home/some-user/projects/rpi-yocto-build/tmp/work/x86_64-linux/binutils-native/2.29-r0/temp/log.do_install.73730)
ERROR: Logfile of failure stored in: /home/some-user/projects/rpi-yocto-build/tmp/work/x86_64-linux/binutils-native/2.29-r0/temp/log.do_install.73730
...
...
...
ERROR: Task (virtual:native:/home/some-user/projects/poky/meta/recipes-devtools/binutils/binutils_2.29.bb:do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 826 tasks of which 431 didn't need to be rerun and 1 failed.
Looked at the home/some-user/projects/rpi-yocto-build/tmp/work/x86_64-linux/binutils-native/2.29-r0/temp/log.do_install.73730 log file and found the following in it
/home/some-user/projects/rpi-yocto-build/tmp/hosttools/ld: cannot find ../bfd/.libs/libbfd.a: No such file or directory
collect2: error: ld returned 1 exit status
Makefile:1116: recipe for target 'ld-new' failed
make[4]: *** [ld-new] Error 1
make[4]: Leaving directory '/home/some-user/projects/rpi-yocto-build/tmp/work/x86_64-linux/binutils-native/2.29-r0/git/build.x86_64-linux.x86_64-linux/ld'
Makefile:1760: recipe for target 'install-recursive' failed
make[3]: *** [install-recursive] Error 1
make[3]: Leaving directory '/home/some-user/projects/rpi-yocto-build/tmp/work/x86_64-linux/binutils-native/2.29-r0/git/build.x86_64-linux.x86_64-linux/ld'
Makefile:1931: recipe for target 'install' failed
make[2]: *** [install] Error 2
make[2]: Leaving directory '/home/some-user/projects/rpi-yocto-build/tmp/work/x86_64-linux/binutils-native/2.29-r0/git/build.x86_64-linux.x86_64-linux/ld'
Makefile:7204: recipe for target 'install-ld' failed
make[1]: *** [install-ld] Error 2
make[1]: *** Waiting for unfinished jobs...
Is ../bfd/.libs/libbfd.a something I should have installed on my machine or it is rocko that is missing it? Is there a fix for this?
I'd suggest that that isn't the actual error, but a subsequent one. Can you do bitbake binutils-native -cclean (to wipe away the partial build) and then bitbake binutils-native, and assuming it breaks again pastebin the entire log.do_install.
Also I've not read that book but it might be worth trying with MACHINE=qemux86 from just a clone of Poky, so we can rule out other layers or configuration.
I tried to install bleuz 5.44 but get this error during make process
error see here
Makefile:5611: recipe for target 'gdbus/mainloop.lo' failed
make[1]: *** [gdbus/mainloop.lo] Error 1
Makefile:3121: recipe for target 'all' failed
make: *** [all] Error 2
I followed the instruction here https://github.com/getsenic/nuimo-linux-python#installing-bluez-from-sources
I tried to install postgresql 9.5(alpha) Ubuntu, but after make world I got this error:
In file included from ../../../../src/include/postgres.h:47:0,
from varlena.c:15:
levenshtein.c: In function ‘varstr_levenshtein’:
../../../../src/include/c.h:726:7: error: static assertion failed: "Levenshtein hinting mechanism restricts NAMEDATALEN"
do { _Static_assert(condition, errmessage); } while(0)
levenshtein.c:104:2: note: in expansion of macro ‘StaticAssertStmt’
StaticAssertStmt(NAMEDATALEN <= MAX_LEVENSHTEIN_STRLEN,
levenshtein.c: In function ‘varstr_levenshtein_less_equal’:
../../../../src/include/c.h:726:7: error: static assertion failed: "Levenshtein hinting mechanism restricts NAMEDATALEN"
do { _Static_assert(condition, errmessage); } while(0)
levenshtein.c:104:2: note: in expansion of macro ‘StaticAssertStmt’
StaticAssertStmt(NAMEDATALEN <= MAX_LEVENSHTEIN_STRLEN,
make[4]: *** [varlena.o] Error 1
make[3]: *** [adt-recursive] Error 2
make[2]: *** [utils-recursive] Error 2
make[1]: *** [all-backend-recurse] Error 2
make: *** [world-src-recurse] Error 2
Does anybody have a suggestion?
In ubuntu you can install latest on this moment postgresql 9.5alpha2 from my ppa by this series of command from terminal:
sudo apt-add repository ppa:kazan417/postgresql
sudo apt-get update
sudo apt-get install postgresql-9.5 postgresql-contrib-9.5 postgresql-client-9.5
This commands not just install postgresql also it setup evrything you need for running postgresql.
Also you can install additional packages. or if you want harder way compile it from source by "dpkg-buildpackage" - this is better ubuntu way of compiling. And then installing by dpkg -i .
Here link you can find more info like dsc file and orig.tar.gz for compiling.