Related
I ran into this toy example recently that has me a bit confused. Suppose I define a simple variable-arity function as below. Then, we are totally within our rights to run this both on one argument and on two.
(define (my-func . a) a)
(my-func 1) ; evals to '(1)
(my-func 1 2) ; evals to '(1 2)
The weird bit I've run into is if I try to pass it multiple arguments in one go using values as below:
(my-func (values 1 2))
I'd expect this to evaluate to the same thing as (my-func 1 2), but instead throws an arity-mismatch error, namely that it expected 1 argument but got 2.
Why is it expecting one argument if my-func is variable-arity? Does this have to do with the number of syntactic objects as arguments or is it something else?
In Racket, values construct multiple return values (often abbrev. as multiple values or values). Except the case where it's a single value, values cannot be passed as argument(s). Values can't be kept in a variable. Values are mostly useful when returned from a function, and when used in forms like define-values, etc. See this section of the Racket Reference for more details.
To use the terminology from the above link, (my-func []) is a continuation that only accepts a single value. That's why in your program, it errors with the message "expects one, got two".
What you are trying to do can be accomplished with call-with-values:
(call-with-values (lambda () (values 1 2)) my-func)
Or do:
(let-values [(a b) (values 1 2)]
(my-func a b))
Unfortunately one cannot capture variable number of values into one variable.
After making it through the major parts of an introductory Lisp book, I still couldn't understand what the special operator (quote) (or equivalent ') function does, yet this has been all over Lisp code that I've seen.
What does it do?
Short answer
Bypass the default evaluation rules and do not evaluate the expression (symbol or s-exp), passing it along to the function exactly as typed.
Long Answer: The Default Evaluation Rule
When a regular (I'll come to that later) function is invoked, all arguments passed to it are evaluated. This means you can write this:
(* (+ a 2)
3)
Which in turn evaluates (+ a 2), by evaluating a and 2. The value of the symbol a is looked up in the current variable binding set, and then replaced. Say a is currently bound to the value 3:
(let ((a 3))
(* (+ a 2)
3))
We'd get (+ 3 2), + is then invoked on 3 and 2 yielding 5. Our original form is now (* 5 3) yielding 15.
Explain quote Already!
Alright. As seen above, all arguments to a function are evaluated, so if you would like to pass the symbol a and not its value, you don't want to evaluate it. Lisp symbols can double both as their values, and markers where you in other languages would have used strings, such as keys to hash tables.
This is where quote comes in. Say you want to plot resource allocations from a Python application, but rather do the plotting in Lisp. Have your Python app do something like this:
print("'(")
while allocating:
if random.random() > 0.5:
print(f"(allocate {random.randint(0, 20)})")
else:
print(f"(free {random.randint(0, 20)})")
...
print(")")
Giving you output looking like this (slightly prettyfied):
'((allocate 3)
(allocate 7)
(free 14)
(allocate 19)
...)
Remember what I said about quote ("tick") causing the default rule not to apply? Good. What would otherwise happen is that the values of allocate and free are looked up, and we don't want that. In our Lisp, we wish to do:
(dolist (entry allocation-log)
(case (first entry)
(allocate (plot-allocation (second entry)))
(free (plot-free (second entry)))))
For the data given above, the following sequence of function calls would have been made:
(plot-allocation 3)
(plot-allocation 7)
(plot-free 14)
(plot-allocation 19)
But What About list?
Well, sometimes you do want to evaluate the arguments. Say you have a nifty function manipulating a number and a string and returning a list of the resulting ... things. Let's make a false start:
(defun mess-with (number string)
'(value-of-number (1+ number) something-with-string (length string)))
Lisp> (mess-with 20 "foo")
(VALUE-OF-NUMBER (1+ NUMBER) SOMETHING-WITH-STRING (LENGTH STRING))
Hey! That's not what we wanted. We want to selectively evaluate some arguments, and leave the others as symbols. Try #2!
(defun mess-with (number string)
(list 'value-of-number (1+ number) 'something-with-string (length string)))
Lisp> (mess-with 20 "foo")
(VALUE-OF-NUMBER 21 SOMETHING-WITH-STRING 3)
Not Just quote, But backquote
Much better! Incidently, this pattern is so common in (mostly) macros, that there is special syntax for doing just that. The backquote:
(defun mess-with (number string)
`(value-of-number ,(1+ number) something-with-string ,(length string)))
It's like using quote, but with the option to explicitly evaluate some arguments by prefixing them with comma. The result is equivalent to using list, but if you're generating code from a macro you often only want to evaluate small parts of the code returned, so the backquote is more suited. For shorter lists, list can be more readable.
Hey, You Forgot About quote!
So, where does this leave us? Oh right, what does quote actually do? It simply returns its argument(s) unevaluated! Remember what I said in the beginning about regular functions? Turns out that some operators/functions need to not evaluate their arguments. Such as IF -- you wouldn't want the else branch to be evaluated if it wasn't taken, right? So-called special operators, together with macros, work like that. Special operators are also the "axiom" of the language -- minimal set of rules -- upon which you can implement the rest of Lisp by combining them together in different ways.
Back to quote, though:
Lisp> (quote spiffy-symbol)
SPIFFY-SYMBOL
Lisp> 'spiffy-symbol ; ' is just a shorthand ("reader macro"), as shown above
SPIFFY-SYMBOL
Compare to (on Steel-Bank Common Lisp):
Lisp> spiffy-symbol
debugger invoked on a UNBOUND-VARIABLE in thread #<THREAD "initial thread" RUNNING {A69F6A9}>:
The variable SPIFFY-SYMBOL is unbound.
Type HELP for debugger help, or (SB-EXT:QUIT) to exit from SBCL.
restarts (invokable by number or by possibly-abbreviated name):
0: [ABORT] Exit debugger, returning to top level.
(SB-INT:SIMPLE-EVAL-IN-LEXENV SPIFFY-SYMBOL #<NULL-LEXENV>)
0]
Because there is no spiffy-symbol in the current scope!
Summing Up
quote, backquote (with comma), and list are some of the tools you use to create lists, that are not only lists of values, but as you seen can be used as lightweight (no need to define a struct) data structures!
If you wish to learn more, I recommend Peter Seibel's book Practical Common Lisp for a practical approach to learning Lisp, if you're already into programming at large. Eventually on your Lisp journey, you'll start using packages too. Ron Garret's The Idiot's Guide to Common Lisp Packages will give you good explanation of those.
Happy hacking!
It says "don't evaluate me". For example, if you wanted to use a list as data, and not as code, you'd put a quote in front of it. For example,
(print '(+ 3 4)) prints "(+ 3 4)", whereas
(print (+ 3 4)) prints "7"
Other people have answered this question admirably, and Matthias Benkard brings up an excellent warning.
DO NOT USE QUOTE TO CREATE LISTS THAT YOU WILL LATER MODIFY. The spec allows the compiler to treat quoted lists as constants. Often, a compiler will optimize constants by creating a single value for them in memory and then referencing that single value from all locations where the constant appears. In other words, it may treat the constant like an anonymous global variable.
This can cause obvious problems. If you modify a constant, it may very well modify other uses of the same constant in completely unrelated code. For example, you may compare some variable to '(1 1) in some function, and in a completely different function, start a list with '(1 1) and then add more stuff to it. Upon running these functions, you may find that the first function doesn't match things properly anymore, because it's now trying to compare the variable to '(1 1 2 3 5 8 13), which is what the second function returned. These two functions are completely unrelated, but they have an effect on each other because of the use of constants. Even crazier bad effects can happen, like a perfectly normal list iteration suddenly infinite looping.
Use quote when you need a constant list, such as for comparison. Use list when you will be modifying the result.
One answer to this question says that QUOTE “creates list data structures”. This isn't quite right. QUOTE is more fundamental than this. In fact, QUOTE is a trivial operator: Its purpose is to prevent anything from happening at all. In particular, it doesn't create anything.
What (QUOTE X) says is basically “don't do anything, just give me X.” X needn't be a list as in (QUOTE (A B C)) or a symbol as in (QUOTE FOO). It can be any object whatever. Indeed, the result of evaluating the list that is produced by (LIST 'QUOTE SOME-OBJECT) will always just return SOME-OBJECT, whatever it is.
Now, the reason that (QUOTE (A B C)) seems as if it created a list whose elements are A, B, and C is that such a list really is what it returns; but at the time the QUOTE form is evaluated, the list has generally already been in existence for a while (as a component of the QUOTE form!), created either by the loader or the reader prior to execution of the code.
One implication of this that tends to trip up newbies fairly often is that it's very unwise to modify a list returned by a QUOTE form. Data returned by QUOTE is, for all intents and purposes, to be considered as part of the code being executed and should therefore be treated as read-only!
The quote prevents execution or evaluation of a form, turning it instead into data. In general you can execute the data by then eval'ing it.
quote creates list data structures, for example, the following are equivalent:
(quote a)
'a
It can also be used to create lists (or trees):
(quote (1 2 3))
'(1 2 3)
You're probably best off getting an introductary book on lisp, such as Practical Common Lisp (which is available to read on-line).
In Emacs Lisp:
What can be quoted ?
Lists and symbols.
Quoting a number evaluates to the number itself:
'5 is the same as 5.
What happens when you quote lists ?
For example:
'(one two) evaluates to
(list 'one 'two) which evaluates to
(list (intern "one") (intern ("two"))).
(intern "one") creates a symbol named "one" and stores it in a "central" hash-map, so anytime you say 'one then the symbol named "one" will be looked up in that central hash-map.
But what is a symbol ?
For example, in OO-languages (Java/Javascript/Python) a symbol could be represented as an object that has a name field, which is the symbol's name like "one" above, and data and/or code can be associated with it this object.
So an symbol in Python could be implemented as:
class Symbol:
def __init__(self,name,code,value):
self.name=name
self.code=code
self.value=value
In Emacs Lisp for example a symbol can have 1) data associated with it AND (at the same time - for the same symbol) 2) code associated with it - depending on the context, either the data or the code gets called.
For example, in Elisp:
(progn
(fset 'add '+ )
(set 'add 2)
(add add add)
)
evaluates to 4.
Because (add add add) evaluates as:
(add add add)
(+ add add)
(+ 2 add)
(+ 2 2)
4
So, for example, using the Symbol class we defined in Python above, this add ELisp-Symbol could be written in Python as Symbol("add",(lambda x,y: x+y),2).
Many thanks for folks on IRC #emacs for explaining symbols and quotes to me.
Code is data and data is code. There is no clear distinction between them.
This is a classical statement any lisp programmer knows.
When you quote a code, that code will be data.
1 ]=> '(+ 2 3 4)
;Value: (+ 2 3 4)
1 ]=> (+ 2 3 4)
;Value: 9
When you quote a code, the result will be data that represent that code. So, when you want to work with data that represents a program you quote that program. This is also valid for atomic expressions, not only for lists:
1 ]=> 'code
;Value: code
1 ]=> '10
;Value: 10
1 ]=> '"ok"
;Value: "ok"
1 ]=> code
;Unbound variable: code
Supposing you want to create a programming language embedded in lisp -- you will work with programs that are quoted in scheme (like '(+ 2 3)) and that are interpreted as code in the language you create, by giving programs a semantic interpretation. In this case you need to use quote to keep the data, otherwise it will be evaluated in external language.
When we want to pass an argument itself instead of passing the value of the argument then we use quote. It is mostly related to the procedure passing during using lists, pairs and atoms
which are not available in C programming Language ( most people start programming using C programming, Hence we get confused)
This is code in Scheme programming language which is a dialect of lisp and I guess you can understand this code.
(define atom? ; defining a procedure atom?
(lambda (x) ; which as one argument x
(and (not (null? x)) (not(pair? x) )))) ; checks if the argument is atom or not
(atom? '(a b c)) ; since it is a list it is false #f
The last line (atom? 'abc) is passing abc as it is to the procedure to check if abc is an atom or not, but when you pass(atom? abc) then it checks for the value of abc and passses the value to it. Since, we haven't provided any value to it
Quote returns the internal representation of its arguments. After plowing through way too many explanations of what quote doesn't do, that's when the light-bulb went on. If the REPL didn't convert function names to UPPER-CASE when I quoted them, it might not have dawned on me.
So. Ordinary Lisp functions convert their arguments into an internal representation, evaluate the arguments, and apply the function. Quote converts its arguments to an internal representation, and just returns that. Technically it's correct to say that quote says, "don't evaluate", but when I was trying to understand what it did, telling me what it doesn't do was frustrating. My toaster doesn't evaluate Lisp functions either; but that's not how you explain what a toaster does.
Anoter short answer:
quote means without evaluating it, and backquote is quote but leave back doors.
A good referrence:
Emacs Lisp Reference Manual make it very clear
9.3 Quoting
The special form quote returns its single argument, as written, without evaluating it. This provides a way to include constant symbols and lists, which are not self-evaluating objects, in a program. (It is not necessary to quote self-evaluating objects such as numbers, strings, and vectors.)
Special Form: quote object
This special form returns object, without evaluating it.
Because quote is used so often in programs, Lisp provides a convenient read syntax for it. An apostrophe character (‘'’) followed by a Lisp object (in read syntax) expands to a list whose first element is quote, and whose second element is the object. Thus, the read syntax 'x is an abbreviation for (quote x).
Here are some examples of expressions that use quote:
(quote (+ 1 2))
⇒ (+ 1 2)
(quote foo)
⇒ foo
'foo
⇒ foo
''foo
⇒ (quote foo)
'(quote foo)
⇒ (quote foo)
9.4 Backquote
Backquote constructs allow you to quote a list, but selectively evaluate elements of that list. In the simplest case, it is identical to the special form quote (described in the previous section; see Quoting). For example, these two forms yield identical results:
`(a list of (+ 2 3) elements)
⇒ (a list of (+ 2 3) elements)
'(a list of (+ 2 3) elements)
⇒ (a list of (+ 2 3) elements)
The special marker ‘,’ inside of the argument to backquote indicates a value that isn’t constant. The Emacs Lisp evaluator evaluates the argument of ‘,’, and puts the value in the list structure:
`(a list of ,(+ 2 3) elements)
⇒ (a list of 5 elements)
Substitution with ‘,’ is allowed at deeper levels of the list structure also. For example:
`(1 2 (3 ,(+ 4 5)))
⇒ (1 2 (3 9))
You can also splice an evaluated value into the resulting list, using the special marker ‘,#’. The elements of the spliced list become elements at the same level as the other elements of the resulting list. The equivalent code without using ‘`’ is often unreadable. Here are some examples:
(setq some-list '(2 3))
⇒ (2 3)
(cons 1 (append some-list '(4) some-list))
⇒ (1 2 3 4 2 3)
`(1 ,#some-list 4 ,#some-list)
⇒ (1 2 3 4 2 3)
This question already has an answer here:
Why does (list 'quote 'x) evaluate to 'x and not ('x) or (quote 'x)?
(1 answer)
Closed 4 years ago.
I need some enlightenment with the combined use of list and quote.
Here is what I see:
[1]> (list '1)
(1)
Fair enough. (list '1) becomes "('1)" which evaluates to (1) since ' just returns what goes after it.
[2]> (list 'quote 1)
'1
Why not 1, why the ' went unevaluated here because:
[3]> '1
1
As a general question, am I wrong that the evaluation process will try to resolve everything it can find recursively?
Since list is supposed to construct a list of its arguments, it would be quite strange if it were to return a number. Indeed, '1 is a two element list, containing as its elements the symbol quote and the number 1:
CL-USER> (first (list 'quote 1))
QUOTE
CL-USER> (second (list 'quote 1))
1
The reason it appears as '1 rather than (QUOTE 1) is because your Lisp system prints single-element lists that begin with quote specially.
(list '1) becomes "('1)" which evaluates to (1)
This is not correct. As list is an ordinary function, its argument forms are evaluated to give the value of each argument. In this case the form '1 will be evaluated to the value 1, which list will receive as its single argument. There is no evaluation of the return value.
Note, I'm assuming Common Lisp here.
First a few definItions/notes:
something like (list 1) is called a form. A form is a Lisp object meant to be evaluated.
Since it is a list, it is called a compound form.
Since the first element of the compound form is list and it stands for a function, it is called a function form.
The first element of a function form is the function and the rest elements are the arguments.
Printing a quote form
'foo is the same as (quote foo), since the quote character is a reader macro, which converts the form 'foo at read time into (quote foo)
But how is it printed? The can depend on the value of the variable *print-pretty*. If this variable has the value T, then the printer uses the pretty printer.
* *print-pretty*
T
* '(quote 1)
'1
But when we don't use the pretty printer to print result values:
* (setf *print-pretty* nil)
NIL
* '(quote 1)
(QUOTE 1)
Thus Lisp can print the same thing in different ways, depending on its configuration.
Evaluation of function forms
When function forms are evaluated, we already know that the first element is a function and the rest elements are the arguments.
Thus in (list '1) we see:
list is the function
'1 is the only argument
Now each of the arguments are evaluated to values:
'1 is evaluated to 1, since the quote operator just returns the enclosed object. So the result value is 1.
Since all arguments are evaluated we can call list with the argument value 1.
This then returns (1), since list returns a list of all the provided argument values.
The second example
Now let's look at the second example: (list 'quote 1).
We have again a function form with the function list. But now we have two arguments 'quote and 1.
We need to evaluate each argument from left to right.
'quote evaluates to the symbol quote.
1 evaluates to 1, since numbers are self-evaluating like most objects (exceptions are symbols and lists).
So we call the function list with the argument values quote and 1.
List makes a list of its argument values. Thus the result is (quote 1).
Now remember: (quote 1) is the same as '1). Thus the printer may print the latter variant.
So we have a list as a result, which can either be printed as (quote 1) or '1. But that makes otherwise no difference:
CL-USER 7 > (equal (quote (quote 1)) ''1)
T
Evaluation is done once
As a general question, am I wrong that the evaluation process will try to resolve everything it can find recursively?
The result of a form is not again evaluated. Evaluation of is done only once: the form itself is evaluated.
If in the REPL I do this:
(dolist (x (1 2 3))
(print x))
then I get an error since in (1 2 3) the digit 1 is not a symbol or a lambda expr.
If I do:
(dolist (x (list 1 2 3))
(print x))
then it works ok.
My question is why the following works:
REPL> (defmacro test (lst)
(dolist (x lst)
(print x)))
=> TEST
REPL> (test (1 2 3))
1
2
3
=>NIL
Why does dolist accept (1 2 3) when it is inside the macro definition but not when directly in the repl?
The assumption:
"Since TEST is a macro ,it does not evaluate its arguments, so (1 2 3) is passed as is to the dolist macro. So dolist must complain like it does when it is passed (1 2 3) in the REPL"
is obviously wrong. But where?
UPDATE: Although the answers help clarify some misunderstandings with macros, my question still stands and i will try to explain why:
We have established that dolist evaluates its list argument(code blocks 1, 2). Well, it doesnt seem to be the case when it is called inside a macro definition and the list argument that is passed to it is one of the defined macro arguments(code block 3). More details:
A macro, when called, does not evaluate its arguments. So my test macro, when it is called, will preserve the list argument and will pass it as it is to the dolist at expansion time. Then at expansion time the dolist will be executed (no backquotes in my test macro def). And it will be executed with (1 2 3) as argument since this is what the test macro call passed to it. So why doesnt it throw an error since dolist tries to evaluate its list argument, and in this case its list argument (1 2 3) is not evaluatable. I hope this clears my confusion a bit.
This form:
(defmacro test (lst)
(dolist (x lst)
(print x)))
defines a macro, which is a "code transformation function" which
gets applied to a form using this macro at macro expansion time. So,
after you have defined this macro, when you evaluate this expression:
(test (1 2 3))
it first gets read to this list:
(test (1 2 3))
Then, since Lisp reads test at the operator position, it gets
macro-expanded by passing the argument, which is the literal list (1
2 3), to the macro expansion function defined above. This means that
the following gets evaluated at macro-expansion time:
(dolist (x '(1 2 3))
(print x))
So, at macro-expansion time, the three values get printed. Finally,
the return value of that form is returned as the code to be compiled
and executed. Dolist returns nil here, so this is the code returned:
nil
Nil evaluates to nil, which is returned.
Generally, such a macro is not very useful. See "Practical Common
Lisp" by Peter Seibel or "On Lisp" by Paul Graham for an introduction
to useful macros.
Update: Perhaps it is useful to recapitulate the order of
reading, expanding, and evaluating Lisp code.
First, the REPL takes in a stream of characters: ( t e s t
( 1 2 3 ) ), which it assembles into
tokens: ( test ( 1 2 3 ) ).
Then, this is translated into a tree of symbols: (test (1 2
3)). There may be so-called reader macros involved in this step.
For example, 'x is translated to (quote x).
Then, from the outside in, each symbol in operator position (i.e., the
first position in a form) is examined. If it names a macro, then the
corresponding macro function is invoked with the code (i.e., the
subtrees of symbols) that is the rest of the form as arguments. The
macro function is supposed to return a new form, i.e. code, which
replaces the macro form. In your case, the macro test gets the code
(1 2 3) as argument, prints each of the symbols contained within
(note that this is even before compile time), and returns nil,
throwing its arguments away (the compiler never even sees your little
list). The returned code is then examined again for possible
macroexpansions.
Finally, the expanded code that does not contain any macro invocations
anymore is evaluated, i.e. compiled and executed. Nil happens to
be a self-evaluating symbol; it evaluates to nil.
This is just a rough sketch, but I hope that it clears some things up.
Your macro test does not return any code. And yes, macro arguments are not evaluated. If you want to see the same error, you have to define your macro as:
(defmacro test (lst)
`(dolist (x ,lst)
(print x)))
Generally when you have questions about macro expansions, referring to MACROEXPAND-1 is a great first step.
* (macroexpand-1 '(test (1 2 3)))
1
2
3
NIL
T
IE, what is happening is that the actual expansion is that sequence of prints.
Nil is what is returned by DOLIST, and is the expanded code.
Macros get their arguments passed unevaluated. They may choose to evaluate them. dolist does that for its list argument. It works with an unquoted list passed in for lst in your macro test:
(defmacro test (lst)
(dolist (x lst)
(print x)))
That's because at macro-expansion time the dolist sees lst as its argument. So when it evaluates it, it gets the list (1 2 3).
lst is a variable, when expand macro test, it also mean eval dolist structure. the first step is to eval the form lst, will get the lisp object (1 2 3).
like follow example:
(defmacro test (a)
(+ a 2))
(test 2) --> 4 ; mean invoke add function, and the first variable a binding a value 2.
After making it through the major parts of an introductory Lisp book, I still couldn't understand what the special operator (quote) (or equivalent ') function does, yet this has been all over Lisp code that I've seen.
What does it do?
Short answer
Bypass the default evaluation rules and do not evaluate the expression (symbol or s-exp), passing it along to the function exactly as typed.
Long Answer: The Default Evaluation Rule
When a regular (I'll come to that later) function is invoked, all arguments passed to it are evaluated. This means you can write this:
(* (+ a 2)
3)
Which in turn evaluates (+ a 2), by evaluating a and 2. The value of the symbol a is looked up in the current variable binding set, and then replaced. Say a is currently bound to the value 3:
(let ((a 3))
(* (+ a 2)
3))
We'd get (+ 3 2), + is then invoked on 3 and 2 yielding 5. Our original form is now (* 5 3) yielding 15.
Explain quote Already!
Alright. As seen above, all arguments to a function are evaluated, so if you would like to pass the symbol a and not its value, you don't want to evaluate it. Lisp symbols can double both as their values, and markers where you in other languages would have used strings, such as keys to hash tables.
This is where quote comes in. Say you want to plot resource allocations from a Python application, but rather do the plotting in Lisp. Have your Python app do something like this:
print("'(")
while allocating:
if random.random() > 0.5:
print(f"(allocate {random.randint(0, 20)})")
else:
print(f"(free {random.randint(0, 20)})")
...
print(")")
Giving you output looking like this (slightly prettyfied):
'((allocate 3)
(allocate 7)
(free 14)
(allocate 19)
...)
Remember what I said about quote ("tick") causing the default rule not to apply? Good. What would otherwise happen is that the values of allocate and free are looked up, and we don't want that. In our Lisp, we wish to do:
(dolist (entry allocation-log)
(case (first entry)
(allocate (plot-allocation (second entry)))
(free (plot-free (second entry)))))
For the data given above, the following sequence of function calls would have been made:
(plot-allocation 3)
(plot-allocation 7)
(plot-free 14)
(plot-allocation 19)
But What About list?
Well, sometimes you do want to evaluate the arguments. Say you have a nifty function manipulating a number and a string and returning a list of the resulting ... things. Let's make a false start:
(defun mess-with (number string)
'(value-of-number (1+ number) something-with-string (length string)))
Lisp> (mess-with 20 "foo")
(VALUE-OF-NUMBER (1+ NUMBER) SOMETHING-WITH-STRING (LENGTH STRING))
Hey! That's not what we wanted. We want to selectively evaluate some arguments, and leave the others as symbols. Try #2!
(defun mess-with (number string)
(list 'value-of-number (1+ number) 'something-with-string (length string)))
Lisp> (mess-with 20 "foo")
(VALUE-OF-NUMBER 21 SOMETHING-WITH-STRING 3)
Not Just quote, But backquote
Much better! Incidently, this pattern is so common in (mostly) macros, that there is special syntax for doing just that. The backquote:
(defun mess-with (number string)
`(value-of-number ,(1+ number) something-with-string ,(length string)))
It's like using quote, but with the option to explicitly evaluate some arguments by prefixing them with comma. The result is equivalent to using list, but if you're generating code from a macro you often only want to evaluate small parts of the code returned, so the backquote is more suited. For shorter lists, list can be more readable.
Hey, You Forgot About quote!
So, where does this leave us? Oh right, what does quote actually do? It simply returns its argument(s) unevaluated! Remember what I said in the beginning about regular functions? Turns out that some operators/functions need to not evaluate their arguments. Such as IF -- you wouldn't want the else branch to be evaluated if it wasn't taken, right? So-called special operators, together with macros, work like that. Special operators are also the "axiom" of the language -- minimal set of rules -- upon which you can implement the rest of Lisp by combining them together in different ways.
Back to quote, though:
Lisp> (quote spiffy-symbol)
SPIFFY-SYMBOL
Lisp> 'spiffy-symbol ; ' is just a shorthand ("reader macro"), as shown above
SPIFFY-SYMBOL
Compare to (on Steel-Bank Common Lisp):
Lisp> spiffy-symbol
debugger invoked on a UNBOUND-VARIABLE in thread #<THREAD "initial thread" RUNNING {A69F6A9}>:
The variable SPIFFY-SYMBOL is unbound.
Type HELP for debugger help, or (SB-EXT:QUIT) to exit from SBCL.
restarts (invokable by number or by possibly-abbreviated name):
0: [ABORT] Exit debugger, returning to top level.
(SB-INT:SIMPLE-EVAL-IN-LEXENV SPIFFY-SYMBOL #<NULL-LEXENV>)
0]
Because there is no spiffy-symbol in the current scope!
Summing Up
quote, backquote (with comma), and list are some of the tools you use to create lists, that are not only lists of values, but as you seen can be used as lightweight (no need to define a struct) data structures!
If you wish to learn more, I recommend Peter Seibel's book Practical Common Lisp for a practical approach to learning Lisp, if you're already into programming at large. Eventually on your Lisp journey, you'll start using packages too. Ron Garret's The Idiot's Guide to Common Lisp Packages will give you good explanation of those.
Happy hacking!
It says "don't evaluate me". For example, if you wanted to use a list as data, and not as code, you'd put a quote in front of it. For example,
(print '(+ 3 4)) prints "(+ 3 4)", whereas
(print (+ 3 4)) prints "7"
Other people have answered this question admirably, and Matthias Benkard brings up an excellent warning.
DO NOT USE QUOTE TO CREATE LISTS THAT YOU WILL LATER MODIFY. The spec allows the compiler to treat quoted lists as constants. Often, a compiler will optimize constants by creating a single value for them in memory and then referencing that single value from all locations where the constant appears. In other words, it may treat the constant like an anonymous global variable.
This can cause obvious problems. If you modify a constant, it may very well modify other uses of the same constant in completely unrelated code. For example, you may compare some variable to '(1 1) in some function, and in a completely different function, start a list with '(1 1) and then add more stuff to it. Upon running these functions, you may find that the first function doesn't match things properly anymore, because it's now trying to compare the variable to '(1 1 2 3 5 8 13), which is what the second function returned. These two functions are completely unrelated, but they have an effect on each other because of the use of constants. Even crazier bad effects can happen, like a perfectly normal list iteration suddenly infinite looping.
Use quote when you need a constant list, such as for comparison. Use list when you will be modifying the result.
One answer to this question says that QUOTE “creates list data structures”. This isn't quite right. QUOTE is more fundamental than this. In fact, QUOTE is a trivial operator: Its purpose is to prevent anything from happening at all. In particular, it doesn't create anything.
What (QUOTE X) says is basically “don't do anything, just give me X.” X needn't be a list as in (QUOTE (A B C)) or a symbol as in (QUOTE FOO). It can be any object whatever. Indeed, the result of evaluating the list that is produced by (LIST 'QUOTE SOME-OBJECT) will always just return SOME-OBJECT, whatever it is.
Now, the reason that (QUOTE (A B C)) seems as if it created a list whose elements are A, B, and C is that such a list really is what it returns; but at the time the QUOTE form is evaluated, the list has generally already been in existence for a while (as a component of the QUOTE form!), created either by the loader or the reader prior to execution of the code.
One implication of this that tends to trip up newbies fairly often is that it's very unwise to modify a list returned by a QUOTE form. Data returned by QUOTE is, for all intents and purposes, to be considered as part of the code being executed and should therefore be treated as read-only!
The quote prevents execution or evaluation of a form, turning it instead into data. In general you can execute the data by then eval'ing it.
quote creates list data structures, for example, the following are equivalent:
(quote a)
'a
It can also be used to create lists (or trees):
(quote (1 2 3))
'(1 2 3)
You're probably best off getting an introductary book on lisp, such as Practical Common Lisp (which is available to read on-line).
In Emacs Lisp:
What can be quoted ?
Lists and symbols.
Quoting a number evaluates to the number itself:
'5 is the same as 5.
What happens when you quote lists ?
For example:
'(one two) evaluates to
(list 'one 'two) which evaluates to
(list (intern "one") (intern ("two"))).
(intern "one") creates a symbol named "one" and stores it in a "central" hash-map, so anytime you say 'one then the symbol named "one" will be looked up in that central hash-map.
But what is a symbol ?
For example, in OO-languages (Java/Javascript/Python) a symbol could be represented as an object that has a name field, which is the symbol's name like "one" above, and data and/or code can be associated with it this object.
So an symbol in Python could be implemented as:
class Symbol:
def __init__(self,name,code,value):
self.name=name
self.code=code
self.value=value
In Emacs Lisp for example a symbol can have 1) data associated with it AND (at the same time - for the same symbol) 2) code associated with it - depending on the context, either the data or the code gets called.
For example, in Elisp:
(progn
(fset 'add '+ )
(set 'add 2)
(add add add)
)
evaluates to 4.
Because (add add add) evaluates as:
(add add add)
(+ add add)
(+ 2 add)
(+ 2 2)
4
So, for example, using the Symbol class we defined in Python above, this add ELisp-Symbol could be written in Python as Symbol("add",(lambda x,y: x+y),2).
Many thanks for folks on IRC #emacs for explaining symbols and quotes to me.
Code is data and data is code. There is no clear distinction between them.
This is a classical statement any lisp programmer knows.
When you quote a code, that code will be data.
1 ]=> '(+ 2 3 4)
;Value: (+ 2 3 4)
1 ]=> (+ 2 3 4)
;Value: 9
When you quote a code, the result will be data that represent that code. So, when you want to work with data that represents a program you quote that program. This is also valid for atomic expressions, not only for lists:
1 ]=> 'code
;Value: code
1 ]=> '10
;Value: 10
1 ]=> '"ok"
;Value: "ok"
1 ]=> code
;Unbound variable: code
Supposing you want to create a programming language embedded in lisp -- you will work with programs that are quoted in scheme (like '(+ 2 3)) and that are interpreted as code in the language you create, by giving programs a semantic interpretation. In this case you need to use quote to keep the data, otherwise it will be evaluated in external language.
When we want to pass an argument itself instead of passing the value of the argument then we use quote. It is mostly related to the procedure passing during using lists, pairs and atoms
which are not available in C programming Language ( most people start programming using C programming, Hence we get confused)
This is code in Scheme programming language which is a dialect of lisp and I guess you can understand this code.
(define atom? ; defining a procedure atom?
(lambda (x) ; which as one argument x
(and (not (null? x)) (not(pair? x) )))) ; checks if the argument is atom or not
(atom? '(a b c)) ; since it is a list it is false #f
The last line (atom? 'abc) is passing abc as it is to the procedure to check if abc is an atom or not, but when you pass(atom? abc) then it checks for the value of abc and passses the value to it. Since, we haven't provided any value to it
Quote returns the internal representation of its arguments. After plowing through way too many explanations of what quote doesn't do, that's when the light-bulb went on. If the REPL didn't convert function names to UPPER-CASE when I quoted them, it might not have dawned on me.
So. Ordinary Lisp functions convert their arguments into an internal representation, evaluate the arguments, and apply the function. Quote converts its arguments to an internal representation, and just returns that. Technically it's correct to say that quote says, "don't evaluate", but when I was trying to understand what it did, telling me what it doesn't do was frustrating. My toaster doesn't evaluate Lisp functions either; but that's not how you explain what a toaster does.
Anoter short answer:
quote means without evaluating it, and backquote is quote but leave back doors.
A good referrence:
Emacs Lisp Reference Manual make it very clear
9.3 Quoting
The special form quote returns its single argument, as written, without evaluating it. This provides a way to include constant symbols and lists, which are not self-evaluating objects, in a program. (It is not necessary to quote self-evaluating objects such as numbers, strings, and vectors.)
Special Form: quote object
This special form returns object, without evaluating it.
Because quote is used so often in programs, Lisp provides a convenient read syntax for it. An apostrophe character (‘'’) followed by a Lisp object (in read syntax) expands to a list whose first element is quote, and whose second element is the object. Thus, the read syntax 'x is an abbreviation for (quote x).
Here are some examples of expressions that use quote:
(quote (+ 1 2))
⇒ (+ 1 2)
(quote foo)
⇒ foo
'foo
⇒ foo
''foo
⇒ (quote foo)
'(quote foo)
⇒ (quote foo)
9.4 Backquote
Backquote constructs allow you to quote a list, but selectively evaluate elements of that list. In the simplest case, it is identical to the special form quote (described in the previous section; see Quoting). For example, these two forms yield identical results:
`(a list of (+ 2 3) elements)
⇒ (a list of (+ 2 3) elements)
'(a list of (+ 2 3) elements)
⇒ (a list of (+ 2 3) elements)
The special marker ‘,’ inside of the argument to backquote indicates a value that isn’t constant. The Emacs Lisp evaluator evaluates the argument of ‘,’, and puts the value in the list structure:
`(a list of ,(+ 2 3) elements)
⇒ (a list of 5 elements)
Substitution with ‘,’ is allowed at deeper levels of the list structure also. For example:
`(1 2 (3 ,(+ 4 5)))
⇒ (1 2 (3 9))
You can also splice an evaluated value into the resulting list, using the special marker ‘,#’. The elements of the spliced list become elements at the same level as the other elements of the resulting list. The equivalent code without using ‘`’ is often unreadable. Here are some examples:
(setq some-list '(2 3))
⇒ (2 3)
(cons 1 (append some-list '(4) some-list))
⇒ (1 2 3 4 2 3)
`(1 ,#some-list 4 ,#some-list)
⇒ (1 2 3 4 2 3)