Trying to simulate Raspberry Pi in windows 10 laptop with windows 10 IOT Core.
http://annabooks.com/Articles/Articles_IoT10Core/Windows-10-IoT-Core-VM-Version-1.2.pdf
I found this article very useful but has used pre-built image “For MinnowBoard Turbot/MAX”.
I get these errors and other errors too.
Failed to load the provider SiloedPackageProvider.dll and metaDeployProvider.dll
CFfuMiscHelpersT ValidateNotOnTheSameDisk#904 failed with 0x80070001.
while executing this command from winpe.
Dism.exe /Apply-Image /ImageFile:"d:\Flash.ffu" /ApplyDrive:.\PhysicalDrive0 /SkipPlatformCheck
Failed to load the provider SiloedPackageProvider.dll and metaDeployProvider.dll
Also please tell me a way to copy logs from the VM running though HyperV.
Thanks
This issue occurs when you try to back up a specific library or when you accept the default settings in Windows Backup and Restore.You may try to follow up this document to fix the issue.
There are various ways exist to copy data between a Hyper-V host and its guest machines. You can search the ways from internet, or open a new issue for help.
Related
I've been using Mongo for a while now, and I never had any kind of errors. But today, I tried running the mongo command in my terminal and I got the following error:
Error connecting to 127.0.0.1:27017 :: caused by :: No connection could be made because the target machine actively refused it. :
I have my PATH variable for Mongo properly configured in my environment variables as follows:
C:\Program Files\MongoDB\Server\4.4\bin
so I doubt that is the issue. I remember going through my task manager yesterday and I accidentally terminated a program running in the background related to Mongo, but I can't seem to remember exactly what it was called, and I really think that that's the root of my problem, because before having terminated that Mongo program in my task manager I had never ran across this connection problem before.
By terminating a program in the background, I'm going to assume you didn't just end process, otherwise a simple computer restart would fix your issue. And in some cases, that same program would've relaunched when you launched MongoDB. But if you disabled a service and need to find which service needs to be running to be able to connect to your MongDB then I would suggest going through your Windows Services list and seeing which ones you disabled and looking one relating to TCP or SNMP.
This is because MongoDB Wire Protocol is a simple socket-based, request-response style protocol. You communicate with the database server through a regular TCP/IP socket and since you can't remember which one you "terminated" and any number of services related to networking can cause a dependency to be absent, I can't be more specific in helping you determine which one you need to turn back on and you'll have to do it through trial and error but I can at least offer you some guidance, hopefully.
Specifically you can either
Run system configuration using
msconfig
In a run box, navigating to the Services tab, order the list by Date Disabled to find the service that was disabled which correlates with when you when snooping through task manager, or
Run Task manager and navigate to the Services Tab, then Open Services, and order them by Status or by Name, and look for any service that includes TCP/IP, COM+, Port direction, etc. to see which one is disabled and change the configuration from anything but Disabled and then stat it manually and run MongDB again.
It's about as specific as I can get without knowing anything more than you terminated some program running in the background but I hope it helps.
The background process (daemon) for MongoDB is called 'mongod'. It's an executable in your bin directory inside your mongodb installation. You can just execute it in the terminal.
Run:
C:\Program Files\MongoDB\Server\4.4\bin\mongod.exe
I was trying to activate my configuration on my local PC, but it failed. I tried:
Isolate 1 or 2 cores on my pc (Under SYSTEM > Real-Time and reboot the PC) and run the PLC tasks on those cores. When I do this I get the following error:
'TwinCAT System' (10000): Sending ams command >> Init4\RTime: Start Interrupt: Ticker started >> AdsWarning: 4118 (0x1016, RTIME: startup of isolated CPU fails!) << failed!
I then tried to run it on the normal windows dedicated CPUs (so none of the CPU’s were isolated). When I activated the configuration (and enabled Virtualization in the BIOS) I got the following error message:
Setting TwinCAT in Run Mode with KB4056894 is not possible
Uninstall KB4056894
or
Activate a solution using only isolated cores
I could not find KB4056894 installed on my PC. Any other solution?
I'm using TwinCAT 3 Build 4022.14 under Windows 10.
From Beckhoff support:
According to the error note, the Microsoft patch for spectre/meltdown
is installed on your PC. Normally, the TC3 should work with this patch
when using isolated cores…
However, since version TC3 Build 4022.16, this problem is solved.
I installed 4022.22 and everything worked.
I just want to share my experience with this error and how I solved it. Just in real-time menu set the cpu cores as 1 shared and 3 isolated cores. since my cpu has 4 core. Then set this value on target and then it will ask for reboot. after reboot it worked without this error and I was able to run the my code.
I have setup the apache cloudstack on CentOS 6.8 machine following quick installation guide. The management server and KVM are setup on the same machine. The management server is running without problems. I was able to add zone, pod, cluster, primary and secondary storage from the web interface. But when I tried to add an instance it is not showing any templates in the second stage as you can see in the screenshot
However, I am able to see two templates under Templates link in web UI.
But when I select the template and navigate to Zone tab, I see Timeout waiting for response from storage host and Ready field shows no.
When I check the management server logs, it seems there is an error when cloudstack tries to mount secondary storage for use. The below segment from cloudstack-management.log file describes this error.
2017-03-09 23:26:43,207 DEBUG [c.c.a.t.Request] (AgentManager-Handler-
14:null) (logid:) Seq 2-7686800138991304712: Processing: { Ans: , MgmtId:
279278805450918, via: 2, Ver: v1, Flags: 10, [{"com.cloud.agent.api.Answer":
{"result":false,"details":"com.cloud.utils.exception.CloudRuntimeException:
GetRootDir for nfs://172.16.10.2/export/secondary failed due to
com.cloud.utils.exception.CloudRuntimeException: Unable to mount
172.16.10.2:/export/secondary at /mnt/SecStorage/6e26529d-c659-3053-8acb-
817a77b6cfc6 due to mount.nfs: Connection timed out\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.getRootDir(Nf
sSecondaryStorageResource.java:2080)\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.execute(NfsSe
condaryStorageResource.java:1829)\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.executeReques
t(NfsSecondaryStorageResource.java:265)\n\tat
com.cloud.agent.Agent.processRequest(Agent.java:525)\n\tat
com.cloud.agent.Agent$AgentRequestHandler.doTask(Agent.java:833)\n\tat
com.cloud.utils.nio.Task.call(Task.java:83)\n\tat
com.cloud.utils.nio.Task.call(Task.java:29)\n\tat
java.util.concurrent.FutureTask.run(FutureTask.java:262)\n\tat
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)\
n\tat
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)\
n\tat java.lang.Thread.run(Thread.java:745)\n","wait":0}}] }
Can anyone please guide me how to resolve this issue? I have been trying to figure it out for some hours now and don't know how to proceed further.
Edit 1: Please note that my LAN address was 10.103.72.50 which I assume is not /24 address. I tried to give CentOs a static IP by making the following settings in ifcg-eth0 file
DEVICE=eth0
HWADDR=52:54:00:B9:A6:C0
NM_CONTROLLED=no
ONBOOT=yes
BOOTPROTO=none
IPADDR=172.16.10.2
NETMASK=255.255.255.0
GATEWAY=172.16.10.1
DNS1=8.8.8.8
DNS2=8.8.4.4
But doing this would stop my internet. As a workaround, I reverted these changes and installed all the packages first. Then I changed the IP to static by the same configuration settings as above and ran the cloudstack management. Everything worked fine untill I bumped into this template thing. Please help me figure out what might have went wrong
I know I'm late, but for people trying out in the future, here it goes:
I hope you have successfully added a host as mentioned in Quick Install Guide before you changed your IP to static as it autoconfigures VLANs for different traffic and creates two bridges - generally with names 'cloud' or 'cloudbr'. Cloudstack uses the Secondary Storage System VM for doing all the storage-related operations in each Zone and Cluster. What seems to be the problem is that secondary storage system vm (SSVM) is not able to communicate with the management server at port 8250. If not, try manually mounting the NFS server's mount points in the SSVM shell. You can ssh into the SSVM using the below command:
ssh -i /var/cloudstack/management/.ssh/id_rsa -p 3922 root#<Private or Link local Ip address of SSVM>
I suggest you run the /usr/local/cloud/systemvm/ssvm-check.sh after doing ssh into the secondary storage system VM (assuming it is running) and has it's private, public and link local IP address. If that doesn't help you much, take a look at the secondary storage troubleshooting docs at Cloudstack.
I would further recommend, if anyone in future runs into similar issues, check if the SSVM is running and is in "Up" state in the System VMs section of Infrastructure tab and that you are able to open up a console session of it from the browser. If that is working go on to run the ssvm-check.sh script mentioned above which systematically checks each and every point of operation that SSVM executes. Even if console session cannot be opened up, you can still ssh using the link local IP address of SSVM which can be accessed by opening up details of SSVM and than execute the script. If it says, it cannot communicate with Management Server at port 8250, I recommend you check the iptables rules of management server and make sure all traffic is allowed at port 8250. A custom command to check the same is nc -v <mngmnt-server-ip> 8250. You can do a simple search and learn how to add port 8250 in your iptables rules if that is not opened. Next, you mentioned you used CentOS 6.8, so it probably uses older versions of nfs, so execute exportfs -a in your NFS server to make sure all the NFS shares are properly exported and there are no errors. I would recommend that you wait for the downloading status of CentOS 5.5 no GUI kvm template to be complete and its Ready status shown as 'Yes' before you start importing your own templates and ISOs to execute on VMs. Finally, if your ssvm-check.sh script shows everything is good and the download still does not start, you can run the command: service cloud restart and actually check if the service has gotten a PID using service cloud status as the older versions of system vm templates sometimes need us to manually start the cloud service using service cloud start even after the restart command. Restarting the cloud service in SSVM triggers the restart of downloading of all remaining templates and ISOs. Side note: the system VMs uses a Debian kernel if you want to do some more troubleshooting. Hope this helps.
I am trying to make a 'dual core' RaspberryPi for a project I am working on. I had followed this tutorial by Simon Cox. Unfortunately I could not get the two RasPi to talk to each other. (This was using Hydra as the process manager)
After looking more carefully at the MPICH installers guide, which can be found here, I tried to use the -phrase to pass the passphrase I had created. However I could not find it as part of the hydra commands. So I re-installed with smpd and after many compiling attempts. I configured with:
/configure -prefix=/home/pi/mpich-install --with-pm=smpd --with-pmi=smpd
I also had to install libbsl-dev to get the MD5 that smpd requires. I also exported the path that the commands mpiexec and mpicc are in. After setting the passphrase I copied the image to a second SD card and put it in a second RasPi. I then set up the passphrase using ssh-keygen.
I was able to run the cpi program on the master Pi and the slave Pi individually but when I tried to run multiple processes on both at the same time I got the error
Fatal error in MPI_Init: Other MPI error, error stack:
MPIR_Init``_thread(392).................:
MPID_Init(139)........................: channel initialization failed
MPIDI_CH3_Init(38)....................:
MPID_nem_init(196)....................:
MPIDI_CH3I_Seg_commit(366)............:
MPIU_SHMW_Hnd_deserialize(324)........:
MPIU_SHMW_Seg_open(863)...............:
MPIU_SHMW_Seg_create_attach_templ(637): open failed - No such file or directory
Can someone please suggest how I can either fix this problem or get the RaspberryPis to communicate using MPICH?
Thanks
E.Lee
If anyone else has this problem make sure your hosts don't have the same name!
You can change it by following this tutorial http://raspi.tv/2012/how-to-change-the-name-of-your-raspberry-pi-new-hostname
I am making my first attempts at using PowerShell remoting features. I've set up the "destination" server using the instructions in the help docs. But when I attempt to start a remote session (by executing an "Enter-PSSession servername1" command), it sits there for a long time, and eventually gives this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for Windows Remote Management service is enabled. For more information, see the about_Remote_Troubleshooting Help topic.
I also noticed that while it was sitting there, my computer's performance had degraded. Looking at Task Manager, I see that ekrn.exe, which is the kernel process for Nod32 Antivirus, was using a lot of CPU (~50%, sometimes edging higher). It seems to never stop using the CPU until I kill the process, and I did some testing, and it clearly begins to use all that CPU as soon as I execute that Enter-PSSession command.
I then tried disabling the Nod32 anti-virus, executed the same command, and voilà, it worked, and the remote session started properly.
But obviously disabling my anti-virus isn't a solution. Can anyone suggest a better one?
It turns out I wasn't running the latest version of Nod32. I was running version 3, the I was able to upgrade to version 4, and the problem went away.