I have a problem detecting outliers in a set of data. Let's say I have two arrays x and y, and y is a quadratic function of x. Some of the values of y do not follow this function. How can I detect them?
I tried the rmoutliers function, but it doesn't seem to solve this problem since it only deals with normally distributed data.
Basically, I am trying to study some material behavior. The behavior is represented by y. I use an optimization method to get the different values of y as a function of x. Because sometimes the optimization doesn't yield accurate results, I get outliers.The relationship I am expecting should follow some nearly quadratic function, but the coefficients of this function are variable based one the provided set of data, so I can't use a certain function of x and use it to detect the outliers in the array of y values.
I am trying to perform a multi-objective optimization using MATLAB on two functions involving norms (shown in the image). The first function, f1(v), is to be minimized and involves the 0-norm. The second function, f2(v), is to be maximized and involves the 2-norm. Both u and v are vectors, however, u is fixed. The product vti . u produces a scalar. I am interested in generating the Pareto front for those two functions given a list of 10,000 different random vectors vi. Suggestions appreciated.
Let us suppose I do have two functions on a grid [X,Y]=meshgrid(x,y),
f=f(x,y) and g=g(x,y)
and I want to calculate
sqrt(f^2+g^2)
in two different ways:
Expanding f^2 and g^2 symbolically first and then applying
V1=(f.^2+g.^2).^(1/2).
Using f=f(X,Y), g=g(X,Y) (this is, computing f and g on the grid first) and then applying the puntual operation over the matrices
V2=(f.^2+g.^2).^(1/2)
Unfortunately, when I calculate abs(V1-V2), I don't get zero in all positions.
In my case, the functions have the form
f=f(x,y,cos(x),cos(y),cos(x)cos(y))
and the same for g.
What could be the best method to calculate this operations in order to get the closest result with respect to the analytical function without changing the grid?
I'm using octave 3.8.1 which works like matlab.
I have an array of thousands of values I've only included three groupings as an example below:
(amp1=0.2; freq1=3; phase1=1; is an example of one grouping)
t=0;
amp1=0.2; freq1=3; phase1=1; %1st grouping
amp2=1.4; freq2=2; phase2=1.7; %2nd grouping
amp3=0.8; freq3=5; phase3=1.5; %3rd grouping
The Octave / Matlab code below solves for Y so I can plug it back into the equation to check values along with calculating values not located in the array.
clear all
t=0;
Y=0;
a1=[.2,3,1;1.4,2,1.7;.8,5,1.5]
for kk=1:1:length(a1)
Y=Y+a1(kk,1)*cos ((a1(kk,2))*t+a1(kk,3))
kk
end
Y
PS: I'm not trying to solve for Y since it's already solved for I'm trying to solve for Phase
The formulas located below are used to calculate Phase but I'm not sure how to put it into a for loop that will work in an array of n groupings:
How would I write the equation / for loop for finding the phase if I want to find freq=2.5 and amp=.23 and the phase is unknown I've looked online and it may require writing non linear equations which I'm not sure how to convert what I'm trying to do into such an equation.
phase1_test=acos(Y/amp1-amp3*cos(2*freq3*pi*t+phase3)/amp1-amp2*cos(2*freq2*pi*t+phase2)/amp1)-2*freq1*pi*t
phase2_test=acos(Y/amp2-amp3*cos(2*freq3*pi*t+phase3)/amp2-amp1*cos(2*freq1*pi*t+phase1)/amp2)-2*freq2*pi*t
phase3_test=acos(Y/amp3-amp2*cos(2*freq2*pi*t+phase2)/amp3-amp1*cos(2*freq1*pi*t+phase1)/amp3)-2*freq2*pi*t
Image of formula below:
I would like to do a check / calculate phases if given a freq and amp values.
I know I have to do a for loop but how do I convert the phase equation into a for loop so it will work on n groupings in an array and calculate different values not found in the array?
Basically I would be given an array of n groupings and freq=2.5 and amp=.23 and use the formula to calculate phase. Note: freq will not always be in the array hence why I'm trying to calculate the phase using a formula.
Ok, I think I finally understand your question:
you are trying to find a set of phase1, phase2,..., phaseN, such that equations like the ones you describe are satisfied
You know how to find y, and you supply values for freq and amp.
In Matlab, such a problem would be solved using, for example fsolve, but let's look at your problem step by step.
For simplicity, let me re-write your equations for phase1, phase2, and phase3. For example, your first equation, the one for phase1, would read
amp1*cos(phase1 + 2 freq1 pi t) + amp2*cos(2 freq2 pi t + phase2) + amp3*cos(2 freq3 pi t + phase3) - y = 0
Note that ampX (X is a placeholder for 1, 2, 3) are given, pi is a constant, t is given via Y (I think), freqX are given.
Hence, you are, in fact, dealing with a non-linear vector equation of the form
F(phase) = 0
where F is a multi-dimensional (vector) function taking a multi-dimensional (vector) input variable phase (comprised of phase1, phase2,..., phaseN). And you are looking for the set of phaseX, where all of the components of your vector function F are zero. N.B. F is a shorthand for your functions. Therefore, the first component of F, called f1, for example, is
f1 = amp1*cos(phase1+...) + amp2*cos(phase2+...) + amp3*cos(phase3+...) - y = 0.
Hence, f1 is a one-dimensional function of phase1, phase2, and phase3.
The technical term for what you are trying to do is find a zero of a non-linear vector function, or find a solution of a non-linear vector function. In Matlab, there are different approaches.
For a one-dimensional function, you can use fzero, which is explained at http://www.mathworks.com/help/matlab/ref/fzero.html?refresh=true
For a multi-dimensional (vector) function as yours, I would look into using fsolve, which is part of Matlab's optimization toolbox (which means I don't know how to do this in Octave). The function fsolve is explained at http://www.mathworks.com/help/optim/ug/fsolve.html
If you know an approximate solution for your phases, you may also look into iterative, local methods.
In particular, I would recommend you look into the Newton's Method, which allows you to find a solution to your system of equations F. Wikipedia has a good explanation of Newton's Method at https://en.wikipedia.org/wiki/Newton%27s_method . Newton iterations are very simple to implement and you should find a lot of resources online. You will have to compute the derivative of your function F with respect to each of your variables phaseX, which is very simple to compute since you're only dealing with cos() functions. For starters, have a look at the one-dimensional Newton iteration method in Matlab at http://www.math.colostate.edu/~gerhard/classes/331/lab/newton.html .
Finally, if you want to dig deeper, I found a textbook on this topic from the society for industrial and applied math: https://www.siam.org/books/textbooks/fr16_book.pdf .
As you can see, this is a very large field; Newton's method should be able to help you out, though.
Good luck!
I'm not too familiar with MATLAB or computational mathematics so I was wondering how I might solve an equation involving the sum of squares, where each term involves two vectors- one known and one unknown. This formula is supposed to represent the error and I need to minimize the error. I think I'm supposed to use least squares but I don't know too much about it and I'm wondering what function is best for doing that and what arguments would represent my equation. My teacher also mentioned something about taking derivatives and he formed a matrix using derivatives which confused me even more- am I required to take derivatives?
The problem that you must be trying to solve is
Min u'u = min \sum_i u_i^2, u=y-Xbeta, where u is the error, y is the vector of dependent variables you are trying to explain, X is a matrix of independent variables and beta is the vector you want to estimate.
Since sum u_i^2 is diferentiable (and convex), you can evaluate the minimal of this expression calculating its derivative and making it equal to zero.
If you do that, you find that beta=inv(X'X)X'y. This maybe calculated using the matlab function regress http://www.mathworks.com/help/stats/regress.html or writing this formula in Matlab. However, you should be careful how to evaluate the inverse (X'X) see Most efficient matrix inversion in MATLAB