Within the Kentico admin, when I go to a User and click the Generate New Password button, the email always fails with error message:
The SMTP server requires a secure connection or the client was not >authenticated. The server response was: 5.7.0 Authentication required
I have two (2) Kentico sites, running Kentico 11. Both sites have identical SMTP settings, using the same mail server, same email, same authentication, etc. On one server, the generate password emails works. I repeat, it works. On the other I get the error.
Test emails that I send from both sites' admin work fine. Have tried sending from the Email queue AND the System applications in the admin. Both areas on both sites work just fine, so my SMTP settings are correct.
I have tried adding to following to the appSettings:
<add key="CMSLogEmails" value="true"/>
<add key="CMSDebugEmails" value="true"/>
But nothing helpful shows up in the Event log. Even without those, nothing shows up in Event log.
Be sure to set your emails addresses in the Settings app for sending password resets. Some SMTP providers require you to have a valid "from" email address.
Related
I want to be able to use my Google Workspace email alias when automating email sending using yagmail and gmail's SMTP server.
I have set the default "Send Email As" address from the main email (#gmail.com) to the alias email (#domain.com), which is fine when sending manually. I currently have 2SV enabled with my main email & app password sending emails properly through yagmail, but it still shows the sending address as the main email. I tried authenticating with the email alias and a new app password, but I am receiving the following error:
smtplib.SMTPAuthenticationError: (535, b'5.7.8 Username and Password not accepted).
I tried a few solutions found online, such as this one (https://support.google.com/mail/thread/127655543/gmail-alias-not-working-it-says-the-password-i-am-entering-for-the-alias-is-wrong-but-it-s-correct?hl=en), to no avail.
Why is using App password fine for my main email but not my domain alias? How can I automate sending emails using domain alias? Any help on this would be greatly appreciated!
I am using Umbraco Forms v.10 and I'm trying to set up a workflow of sending email (without template) when the form is submitted.
The form works, I can see the entries at Umbraco's backoffice but I did not get any email.
At Logs I get the following error at Logs:
"There was a problem sending an email to {Email} from Workflow for Form {FormName} with id {FormId} for Record with unique id {RecordId}","#l":"Error","#x":"MailKit.Net.Smtp.SmtpProtocolException: The SMTP server has unexpectedly disconnected."
The SMTP is the following:
SMPT
Did I miss something?
I cannot actually find any documentation about that at Umbraco.
Your SMTP settings are most likely incorrect. If you're running your site on your local computer, it's very unlikely you have an SMTP server on "localhost". If your Umbraco site is on a shared host, it's also unlikely the SMTP server is "localhost". So I think your SMTP settings are incorrect and that's why Umbraco is unable to send the email for you.
Find out your webhosts SMTP details, if your webhost was Simply.com, the credentials would be something along the lines of:
Host: smtp.simply.com
Port: 25
I have been trying to configure SMTP in order to send an confirmation email to email based self-registration users but each time an error message appear saying that
Tried to send you an email but failed!
this is my moodle email configurations
this is the error message I get when I run a test email
when searched the error I found that Moodle does not connect to email server.
is there any other configurations that I should check?
since this did not work I tried to connect through outlook.
I tried to configure outlook but it also failed.
this is the configuration for outlook
this is the error I get
please help..!!!
I'm not entirely sure what the problem is, we are using our own mailserver..
However, there are some restrictions to Gmail usage, which can require you to make some changes on your Gmail account.
Have a look at this to allow a new service access to your Gmail account:
https://www.lifewire.com/unlock-gmail-for-a-new-email-program-or-service-1171974
And here to allow your Gmail access to less secure services and programs:
https://myaccount.google.com/lesssecureapps?pli=1
There is lots of posts with users having same error, but none of them works for me...
I am trying to send email reports in Hudson/Jenkins...
Our mail server uses SSL/TLS, I configured Jenkins for TLS, then I am getting this error:
Client does not have permissions to send as this sender
When I try javamail using code, it sends the email properly. Also, Thunderbird works fine.
Any ideas? Do I need to contact mail server administrators?
Finally got it, thanks to Friso
Had to set my email address in System Admin e-mail address under Jenkins Location.
The email should be changed in three places as below as per version 2.19.4:
Extended E-mail Notification - If using SMTP plugin
Email Notification - SMTP Authentication
Jenkins location - System Admin e-mail address
I had the same issue, and I discovered that credentials were no more valid, so I asked to the IT department who told me that credentials were no more need on LAN.
Now it works!
I have a site, which has a server with "Parallels Plesk Panel" installed. I want to send an email from that site a "Contact Us" message to info#domain.com email.
The problem is that this email was already created by one of the programmers using the google mail system (apparently you can create accounts there with a domain name different from gmail.com).
So now, the server rejects my message, telling me that it can't find an email with this name. It works fine when I send to any other domain, but when sending to the same one, it fails. I've created another email info2#domain.com and sent emails there and it works.
My question now is, how do I send emails to the existent info#domain.com which is already created in gmail without making the server block me. One of the options I saw at this panel is to redirect the request for that email to another mailing system (and to specify its IP). Maybe that would help if I would to put there gmails IP?
Thanks.
EDIT:
Using my contact us form I am sending an email to info#domain.com. I get an SMTP error 550, can't find the mail box. When sending to anything but #domain.com it works. When adding that email to my server, it is also fine.
Now, the previous programmer already created info#domain.com, but not with our plesk panel, but using gmail server. Apparently, using gmail you can create an email of the type info#domain.com and not just info#gmail.com. The obvious problem is then that I try to send to this email. It sees that the server is domain.com and tries to find it there (same domain as the site from which I send the message). It fails and gives me the 550 error.
I want the server to send the email with that message to info#domain.com which is actually on gmail.
if I understand correctly, your problem is that two servers think they host the maildomain: your plesk server and gmail.
solution: disable local mail delivery for that domain on the plesk server and make sure plesk can correctly resolve the mx records of that domain , runing dig mx +short domain.com on the plesk server should return a google owned hostname, not the local hostname.
I don't own a plesk server, so I can't tell how how exactly to disable the mail domain, but a quick google search returns: http://www.serveridol.com/2011/03/16/disabling-email-service-for-a-domain-in-plesk/
http://search.yahoo.com/search?p=email+form+service&ei=UTF-8&fr=chr-greentree_ff&type=827316
try a remote email form service. most hosting companies' mail servers are local. to do this, you would have to make your own .htaccess file which contains php.ini mail server settings. i THINK this is correct. you can install php yourself to see what those settings are.
this is something you will probably have to do through the web hosting control panel.
and by the way, XHTML is served up as HTML unless you configure the server to serve XHTML up as XHTML. so use HTML when possible unless you know how to do that. here's how.
http://jesusnjim.com/web-design/setup-test-server.html