I've tried with and without Secret ID, and now with a self-signed Certificate and I keep getting the same error:
Exception calling "AutodiscoverUrl" with "2" argument(s): "The
expected XML node type was XmlDeclaration, but the actual type is
Element."
My PowerShell script:
$TenantId = "blahblah"
$AppClientId="blahblah"
$EDIcertThumbPrint = "blahblah"
$EDIcert = get-childitem Cert:\CurrentUser\My\$EDIcertThumbPrint
$MsalParams = #{
ClientId = $AppClientId
TenantId = $TenantId
ClientCertificate = $EDIcert
Scopes = "https://outlook.office.com/.default"
}
$MsalResponse = Get-MsalToken #MsalParams
$EWSAccessToken = $MsalResponse.AccessToken
Import-Module 'C:\Program Files\Microsoft\Exchange\Web Services\2.2\Microsoft.Exchange.WebServices.dll'
#Provide the mailbox id (email address) to connect via AutoDiscover
$MailboxName ="email#myemaildomain.com.au"
$ews = [Microsoft.Exchange.WebServices.Data.ExchangeService]::new()
$ews.Credentials = [Microsoft.Exchange.WebServices.Data.OAuthCredentials]$EWSAccessToken
$ews.Url = "https://outlook.office365.com/EWS/Exchange.asmx"
$ews.AutodiscoverUrl($MailboxName,{$true})
I've searched that error message everywhere, and I am not getting anywhere. The error doesn't make sense, because I am not referring to XML in any way - unless it's embedded inside the EWS?
The only time this works is when I don't use either a Secret ID nor a Certificate, but the Token only lasts 1 hour! I need to make this automatic, so I can get into my mailbox and extract files from emails.
Thanks
UPDATE
So I've removed the AutoDiscoverUrl() and I now getting another error:
Exception calling "FindItems" with "2" argument(s): "The request
failed. The remote server returned an error: (403) Forbidden."
Trace log:
The token contains not enough scope to make this call.";error_category="invalid_grant"
But why when I have an Oauth token!?
My code in trying to open the "Inbox":
$results = $ews.FindItems(
"Inbox",
( New-Object Microsoft.Exchange.WebServices.Data.ItemView -ArgumentList 100 )
)
$MailItems = $results.Items | where hasattachments
AutoDiscoverv1 doesn't support the client credentials flow so you need to remove the line
$ews.AutodiscoverUrl($MailboxName,{$true})
It's redundant anyway because your already setting the EWS endpoint eg
$ews.Url = "https://outlook.office365.com/EWS/Exchange.asmx"
The only time that endpoint would change is if you had mailbox OnPrem in a hybrid environment and there are other ways you can go about detecting that such as autodiscoverv2.
Is it possible to get the total count of records in db (5M records) using powershell?
$database = New-Object HP.HPTRIM.SDK.Database
$database.Id = "10"
$database.WorkgroupServerName = "dbnonprod"
$database.Connect()
$recordSearch = New-Object HP.HPTRIM.SDK.TrimMainObjectSearch($database, [HP.HPTRIM.SDK.BaseObjectTypes]::Record)
$recordSearch.SetsearchString("All")
$a = 0
foreach ($record in $recordSearch) {
$a+= $record.count
}
echo $a
And this is my error when trying to get the totalcount store on the db from content manager database
Content Manager Workgroup Server on 'dbnonprod' reported an error.
Could not serialize the server-side recordset. Error with SQL
Connection: The ODBC connection is not active any more, could be
forcibly closed by the server or in load balancing.
Background.
i have IBM CDC Replication engine and i need to check subscriptions status by using Zabbix.
Im calling subs status by cmd.exe /C "C:\Program Files\IBM\InfoSphere Data Replication\Management Console\bin\chcclp.exe" -f c:\CDC_Check.txt where CDC_Check.txt is script for that chcclp CLI
//Check the status of all subscriptions
//Source datastore: ***
//Target datastore: ***
chcclp session set to cdc;
// Turn on verbose output.
set verbose;
// Setting variables.
set variable name "ACCESS_HOSTNAME" value "";
set variable name "ACCESS_PORT" value "";
set variable name "ACCESS_USERNAME" value "";
set variable name "ACCESS_PASSWORD" value "";
set variable name "SOURCE_DATASTORE" value "";
set variable name "TARGET_DATASTORE" value "";
// Connecting to Access Server.
connect server
hostname "%ACCESS_HOSTNAME%"
port "%ACCESS_PORT%"
username "%ACCESS_USERNAME%"
password "%ACCESS_PASSWORD%";
// Connecting to the source and target datastores.
connect datastore name "%SOURCE_DATASTORE%";
connect datastore name "%TARGET_DATASTORE%";
// Setting the datastore context.
select datastore name "%SOURCE_DATASTORE%" context source;
select datastore name "%TARGET_DATASTORE%" context target;
// List replication state and latency of all subscriptions.
monitor replication;
// Disconnecting from datastores and Access Server.
disconnect datastore name "%SOURCE_DATASTORE%";
disconnect datastore name "%TARGET_DATASTORE%";
// Disconnect from Access Server and terminate the script.
disconnect server;
exit;
and im receiving following result:
Im trying to parse Subscription + Status and move it to Json for next integration with zabbix.
Im very new in PS so i still have no normal progress.
I understand idea that i need to capture anything that going under SUBSCRIPTIONS and STATE and write it to Json.
The first step would be to redirect the output of the app so you can read it in for parsing.
cmd.exe /C "C:\Program Files\IBM\InfoSphere Data Replication\Management Console\bin\chcclp.exe" -f c:\CDC_Check.txt > C:\temp\file.log
Then you can use the get Get-Content cmdlet to get it in your console session
$fileContent = Get-Content -Path "C:\temp\file.log"
Once it's in an array you can parse it like so.
$i=0
$fileContent | %{
$i++
if($_ | Select-String -Pattern "SUBSCRIPTION STATE" -CaseSensitive){
$headerIndex = $i
}
}
$headerIndex += 2 #start of report data to capture
This loop continues until it finds the blank line in the output
$hashObj= #{}
for ($x = $headerIndex; $fileContent[$x].length -gt 1 ;$x++){
$hashObj.Add("$($fileContent[$x].Substring(0,19).Trim(' '))","$($fileContent[$x].Substring(20,19).Trim(' '))")
}
#converts your hashtable to json object
$jsonObj = $hashObj | convertto-json
Not entirely sure how you need the json formatted but this will be what to expect your output to be similar to
{
"S_ACC_D": "Mirror Continuous",
"S_ACC_E": "Mirror Continuous",
"S_ACC_A": "Mirror Continuous",
"S_ACC_B": "Mirror Continuous",
"S_ACC_C": "Mirror Continuous"
}
I've got some strange behavior between me running a command under my profile, and TeamCity running the same command.
> Import-Module $root\packages\fsm.buildrelease.*\tools\modules\BuildDeployModules -Force
If I run the script manually, the build kicks off as expected. If I let TeamCity execute the script, it pukes with the following.
Import-Module : The specified module 'C:\BuildAgent\work\81eb7c2fdfcfc0af\packages\fsm.buildrelease.*\tools\modules\BuildDeployModules' was not loaded because no valid module file was found in any module directory.
I have double and triple verified that the module exists in that location. And I've gone through my modules and added [cmdletbinding()] before the param, but it doesn't seem to solve this issue.
It's frustrating because it doesn't say "which" module is getting an invalid parameter passed in.
$fsmbrVersion = "1.1.1" # contains the current version of fsm.buildrelease
Write-Host "`nfsm.buildrelease version $fsmbrVersion `nCopyright ($([char]0x00A9)) Future State Mobile Inc. & Contributors`n"
Push-Location $psScriptRoot
. .\Add-HostsFileEntry.ps1
. .\Add-IISHttpVerb.ps1
. .\Add-IISMimeType.ps1
. .\Add-LoopbackFix.ps1
. .\ApplicationAdministration.ps1
. .\AppPoolAdministration.ps1
. .\Approve-Permissions.ps1
. .\Assert-PSVersion.ps1
. .\EntityFramework.ps1
. .\Expand-NugetPackage.ps1
. .\Expand-ZipFile.ps1
. .\Format-TaskNameToHost.ps1
. .\Get-EnvironmentSettings.ps1
. .\Grunt.ps1
. .\Helpers.ps1
. .\Install-WebApplication.ps1
. .\Invoke-Deployment.ps1
. .\Invoke-DeployOctopusNugetPackage.ps1
. .\Invoke-ElevatedCommand.ps1
. .\Invoke-ExternalCommand.ps1
. .\Invoke-Using.ps1
. .\MSBuild.ps1
. .\Nuget.ps1
. .\nUnit.ps1
. .\Set-IISAuthentication.ps1
. .\Set-IISCustomHeader.ps1
. .\SiteAdministration.ps1
. .\Specflow.ps1
. .\SqlHelpers.ps1
. .\Test-PathExtended.ps1
. .\Test-RunAsAdmin.ps1
. .\TextUtils.ps1
. .\Update-AssemblyVersions.ps1
. .\Update-JsonConfigFile.ps1
. .\Update-XmlConfigFile.ps1
. .\WindowsFeatures.ps1
. .\xUnit.ps1
Pop-Location
Export-ModuleMember `
-Alias #(
'*') `
-Function #(
'Add-HostsFileEntry',
'Add-IISHttpVerb',
'Add-IISMimeType',
'Add-LoopbackFix',
'Approve-Permissions',
'Assert-That',
'Assert-PSVersion',
'Confirm-ApplicationExists',
'Confirm-AppPoolExists',
'Confirm-SiteExists',
'Exec',
'Expand-NugetPackage',
'Expand-ZipFile',
'Format-TaskNameToHost',
'Get-Application',
'Get-Applications',
'Get-AppPool',
'Get-AppPools',
'Get-DatabaseConnection',
'Get-EnvironmentSettings',
'Get-Site',
'Get-Sites',
'Get-TestFileName',
'Get-WarningsFromMSBuildLog',
'Get-WindowsFeatures',
'Install-WebApplication',
'Install-WindowsFeatures',
'Invoke-BulkCopy',
'Invoke-DBMigration',
'Invoke-Deployment',
'Invoke-DeployOctopusNugetPackage',
'Invoke-ElevatedCommand',
'Invoke-EntityFrameworkMigrations',
'Invoke-ExternalCommand',
'Invoke-FromBase64',
'Invoke-GruntMinification',
'Invoke-HtmlDecode',
'Invoke-HtmlEncode',
'Invoke-KarmaTests',
'Invoke-MSBuild',
'Invoke-Nunit',
'Invoke-NUnitWithCoverage'
'Invoke-SpecFlow',
'Invoke-SqlFile',
'Invoke-SqlStatement',
'Invoke-ToBase64',
'Invoke-UrlDecode',
'Invoke-UrlEncode',
'Invoke-Using',
'Invoke-XUnit',
'Invoke-XUnitWithCoverage',
'New-Application',
'New-AppPool',
'New-NugetPackage',
'New-Site',
'Remove-Application',
'Remove-AppPool',
'Remove-Site',
'RequiredFeatures',
'Set-IISAuthentication',
'Set-IISCustomHeader',
'Start-Application',
'Start-AppPool',
'Start-Site',
'Step',
'Stop-Application',
'Stop-AppPool',
'Stop-Site',
'Test-PathExtended',
'Test-RunAsAdmin',
'Update-Application',
'Update-AppPool',
'Update-AssemblyVersions',
'Update-JsonConfigValues',
'Update-Site',
'Update-XmlConfigValues'
)
# Messages
DATA msgs {
convertfrom-stringdata #"
error_duplicate_step_name = Step {0} has already been defined.
error_must_supply_a_feature = You must supply at least one Windows Feature.
error_feature_set_invalid = The argument `"{0}`" does not belong to the set `"{1}`".
error_admin_required = You are required to 'Run as Administrator' when running this deployment.
error_loading_sql_file = Error loading '{0}'. {1}.
error_octopus_deploy_failed = Failed to deploy: {0}.
error_specflow_failed = Publishing specflow results for '{0}' failed.
error_coverage_failed = Running code coverage for '{0}' failed.
error_tests_failed = Running tests '{0}' failed.
error_msbuild_compile = Error compiling '{0}'.
wrn_full_permission = You have applied FULL permission to '{0}' for '{1}'. THIS IS DANGEROUS!
wrn_cant_find = Could not find {0} with the name: {0}.
msg_grant_permission = Granting {0} permissions to {1} for {2}.
msg_enabling_windows_feature = Enabling Windows Feature: `"{0}`".
msg_wasnt_found = `"{0}`" wasn't found.
msg_updated_to = Updated `"{0}`" to `"{1}`".
msg_updating_to = Updating `"{0}`" to `"{1}`".
msg_changing_to = Changing `"{0}`" to `"{1}`".
msg_overriding_to = Overriding node `"{0}`" with value `"{1}`".
msg_updating_assembly = Updating AssemblyVersion to '{0}'. Updating AssemblyFileVersion to '{1}'. Updating AssemblyInformationalVersion to '{2}'.
msg_not_updating = Not updating {0}, you must specify the '-updateIfFound' if you wish to update the {0} settings.
msg_custom_header = Setting custom header '{0}' on site '{1}' to value '{2}'.
msg_disable_anon_auth = Disabling Anonymous Authentication for '{0}'.
msg_web_app_success = Successfully deploy Web Application '{0}'.
msg_copying_content = Copying {0} content to {1}.
msg_use_machine_environment = Using config for machine {0} instead of the {1} environment.
msg_octopus_overrides = Checking for Octopus Overrides for environment '{0}'.
msg_teamcity_importdata = ##teamcity[importData type='{0}' tool='{1}' path='{2}']
msg_teamcity_buildstatus = ##teamcity[buildStatus text='{0}']
msg_teamcity_buildstatisticvalue = ##teamcity[buildStatisticValue key='{0}' value='{1}']
msg_add_loopback_fix = Adding loopback fix for '{0}'.
msg_add_mime_type = Adding mime type '{0}' for extension '{1}' to IIS site '{2}'.
msg_add_verb = Adding IIS Http Verb '{0}' to site '{1}'.
msg_add_host_entry = Adding host entry for '{0}' into the hosts file.
msg_validate_host_entry = Validating host entry for '{0} in the hosts file'
msg_loopback_note = note: we're not disabling the loopback check all together, we are simply adding '{0}' to an allowed list.
"#
}
The problem is nothing to do with importing the module; powershell isn't very helpful in leading you to the issue. The root of the issue didn't reveal it's self until I put the -VERBOSE switch on the import. Once I did that, I got a new error above the old one.
: Parameter attributes need to be a constant or a script block.
FullyQualifiedErrorId: ParameterAttributeArgumentNeedsToBeConstandOrScriptBlock
Essentially, I was using ValidatePattern with double quotes instead of single quotes. Check and make sure your writing your regex patterns correctly when you use ValidatePattern
# Bad
[ValidatePattern("^[a-z]$")]
# Good
[ValidatePattern('^[a-z]$')]
I am trying to establish a session with a remote host B from my machine A, within a C# code. I am using runspace API for that. the code snippet is provided below
Runspace runspace = RunspaceFactory.CreateRunspace();
runspace.Open();
//constructing the vmname parameter here
vmname = useralias + DateTime.Now.ToString();
Pipeline pipeline = runspace.CreatePipeline();
string scripttext = "$secpasswd = ConvertTo-SecureString '222_bbbb' -AsPlainText –Force";
string scripttext1 = "$mycreds = New-object -typename System.Management.Automation.PSCredential('TS-TEST-09\\Administrator',$secpasswd)";
string scripttext2 = "$s = New-PSSession -ComputerName TS-TEST-09 -Credential $mycreds";
//not accepting session string here, only computername acceptable
**string scripttext3 = "Enter-PSSession -Session $s";**
//Command cmd = new Command(#"C:\mypath\helper.ps1", true);
//cmd.Parameters.Add("local_useralias", useralias);
//cmd.Parameters.Add("local_vmname", vmname);
//cmd.Parameters.Add("local_datastore", datastoredropdown.Text.ToString());
//cmd.Parameters.Add("local_architecture", architecturedropdown.Text.ToString());
pipeline.Commands.AddScript(scripttext);
pipeline.Commands.AddScript(scripttext1);
pipeline.Commands.AddScript(scripttext2);
pipeline.Commands.AddScript(scripttext3);
//pipeline.Commands.Add(cmd);
Collection<PSObject> results = pipeline.Invoke();
runspace.Close();
this code is expected to enter into a session with machine TS-TEST-09 and invoke the script helper.ps1 existing on that machine(that part is commented out in the code currently as i am not able to enter into the session with remote host).
now the problem is that i can't enter into the session $s using -Session parameter(highlighted at scripttext3) however i can enter into it using -Computername parameter.
the error that i get when using -Session parameter in scripttext3 is :
at
invokedSystem.Management.Automation.Internal.Host.InteralHost.GetIHostSupportsInteractiveSession()
at invokedSystem.Management.Automation.
Internal.Host.InteralHost.PushRunspace(Runspace runspace)
at Microsoft.Powershel.Commands.EnterPSSessionCommand.ProcessRecord()
at System.Management.Automation.Cmdlet.DoProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
end of inner exception stack trace
does it mean i have to write a custom PSHost and add support for the Enter-PSSession cmdlet with this parameter?
Is there any alternative to make this command work?
any help will be much appreciated.
Thanks,
Manish
The easiest way to open a remote session goes something like this:
string shell = "http://schemas.microsoft.com/powershell/Microsoft.PowerShell";
var target = new Uri("http://myserver/wsman");
var secured = new SecureString();
foreach (char letter in "mypassword")
{
secured.AppendChar(letter);
}
secured.MakeReadOnly();
var credential = new PSCredential("username", secured);
var connectionInfo = new WSManConnectionInfo(target, shell, credential);
Runspace remote = RunspaceFactory.CreateRunspace(connectionInfo);
remote.Open();
using (var ps = PowerShell.Create())
{
ps.Runspace = remote;
ps.Commands.AddCommand("'This is running on {0}.' -f (hostname)");
Collection<PSObject> output = ps.Invoke();
}
You could also create remote pipelines from the remote runspace instance, but the new PowerShell object is a much more managable way to do this (since powershell v2.)
In powershell v3, you can just new up a WSManConnectionInfo and set the ComputerName property as the other properties adopt the same defaults as the above. Unfortunately these properties are read-only in v2 and you have to pass in the minimum as above. Other variants of the constructor will let you use kerberos/negotiate/credssp etc for authentication.
-Oisin
I wanted to leave a comment on the solution, as it helped me alot as well,
but one thing i was missing was the port for WSMan which is 5985
so this
var target = new Uri("http://myserver/wsman");
should be
var target = new Uri("http://myserver:5895/wsman");
in my case
Have you tried Invoke-Command? Enter-PsSession is there for interactive use. (see help Enter-PsSession -online).