when I using this command to to request server(Java 8 microservice):
curl 'http://localhost:11001/soa/user/user/2176' \
-H 'Sec-Fetch-Mode: cors' -H 'DNT: 1' \
-H 'requestId: 2e0dddf9-17d9-42d9-8614-b44de17fe135' \
-H 'Accept: */*' -H 'clientId: 7c54ff40-f11e-41c0-8d31-4b26d6569b5a' \
-H 'Referer: http://localhost:11001/swagger-ui.html' \
-H 'User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_14_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/76.0.3809.100 Safari/537.36' -H 'token: e565b7f4-9ea2-4685-b3e6-77bc686d4ecd' \
-H 'appCode: 101' -H 'appVersion: Unknown' --compressed
the server side log output is:
2019-08-26 16:26:11.978 INFO [soa-user-service,f0f180a04e719f67,dc56cc9033988ff7,false] 487 --- [io-11001-exec-6] o.apache.http.impl.execchain.RetryExec : I/O exception (org.apache.http.NoHttpResponseException) caught when processing request to {}->http://192.168.2.80:11001: The target server failed to respond
2019-08-26 16:26:11.982 INFO [soa-user-service,f0f180a04e719f67,dc56cc9033988ff7,false] 487 --- [io-11001-exec-6] o.apache.http.impl.execchain.RetryExec : Retrying request to {}->http://192.168.2.80:11001
2019-08-26 16:26:38.594 INFO [soa-user-service,133250a52b415c71,dd171ebf43d3534d,false] 487 --- [io-11001-exec-3] o.apache.http.impl.execchain.RetryExec : I/O exception (org.apache.http.NoHttpResponseException) caught when processing request to {}->http://192.168.2.80:11001: The target server failed to respond
2019-08-26 16:26:38.595 INFO [soa-user-service,133250a52b415c71,dd171ebf43d3534d,false] 487 --- [io-11001-exec-3] o.apache.http.impl.execchain.RetryExec : Retrying request to {}->http://192.168.2.80:11001
2019-08-26 16:26:40.403 INFO [soa-user-service,,,] 487 --- [trap-executor-0] c.n.d.s.r.aws.ConfigClusterResolver : Resolving eureka endpoints via configuration
2019-08-26 16:28:23.046 INFO [soa-user-service,f0f180a04e719f67,dc56cc9033988ff7,false] 487 --- [io-11001-exec-6] o.apache.http.impl.execchain.RetryExec : I/O exception (org.apache.http.NoHttpResponseException) caught when processing request to {}->http://192.168.2.80:11001: The target server failed to respond
2019-08-26 16:28:23.047 INFO [soa-user-service,f0f180a04e719f67,dc56cc9033988ff7,false] 487 --- [io-11001-exec-6] o.apache.http.impl.execchain.RetryExec : Retrying request to {}->http://192.168.2.80:11001
my httpclient version config is:
<commons-httpclient.version>3.1</commons-httpclient.version>
<httpclient.version>4.5.8</httpclient.version>
what should I do to fix the problem?
I finally found it is proxy software problem,close the proxy software it should be ok:
ss-local -c /etc/shadowsocks/shadowsocks.json
Related
I use Go-micro(v2) to deploy services inside docker-compose
user-service:
build:
context: ./user-service
restart: always
ports:
- "8086:8086"
deploy:
mode: replicated
replicas: 1
environment:....
See the service configuration
srv = micro.NewService(
micro.Name("my.user"),
micro.Address("127.0.0.1:8086"))
when running docker-compose, the container logs show
2022-07-31 05:43:53 file=v2#v2.9.1/service.go:200 level=info Starting [service] my.user
2022-07-31 05:43:53 file=grpc/grpc.go:864 level=info Server [grpc] Listening on [::]:8086
2022-07-31 05:43:53 file=grpc/grpc.go:697 level=info Registry [mdns] Registering node: my.user-00ee4795-06df-47f1-a07a-cc362e135864
All looks good.
But when I want to query some handlers using curl or postman(for development purpose), It doesn't work,
see an exemple of failed request with postman
GET http://127.0.0.1:8086/my.user/Get
Error: Parse Error: Expected HTTP/
Request Headers
Content-Type: application/json
User-Agent: PostmanRuntime/7.29.2
Accept: */*
Postman-Token: b5ab718a-341b-40ff-81fa-37c66fd4d9f2
Host: 127.0.0.1:8086
Accept-Encoding: gzip, deflate, br
Connection: keep-alive
Request Body
GET http://127.0.0.1:8086/my.user/userService/Get // same error
with curl it is not better
curl --header "Content-Type:application/json" --http0.9 --output GET http://localhost:8086/my.user/Get
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 15 0 15 0 0 10638 0 --:--:-- --:--:-- --:--:-- 15000
curl --header "Content-Type:application/json" --http0.9 --output GET http://localhost:8086/my.user/userService/Get
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 15 0 15 0 0 13550 0 --:--:-- --:--:-- --:--:-- 15000
Any idea how to query locally some go-micro services ? Thank you.
ps: Note that the 'Get' handler is working
I recently created a S3 bucket at Scaleway.
I mount it using s3fs without apparent problem.
I have problems uploading some "mid size" files.
If the size under 20 M it's ok but for with larger files (50 M and more), the copy fails with message "unable to write file, permission denied".
I contacter scaleway support but they said it's related to my s3fs client.
I mounted the bucket in debug mode, using :
$ sudo s3fs tellurix /mnt/scaleway/ -o passwd_file=${HOME}/.passwd-s3fs,url=https://s3.fr-par.scw.cloud,allow_other -o use_path_request_style,noatime -o dbglevel=info -f -o curldbg
I copy/paste the 100 last lines of the log, because I don't see where the error is .
Thanks a lot for help
* SSL_write() returned SYSCALL, errno = 32
* Closing connection 6
[ERR] curl.cpp:RequestPerform(2546): ### CURLE_SEND_ERROR
* SSL_write() returned SYSCALL, errno = 32
* Closing connection 5
[ERR] curl.cpp:RequestPerform(2546): ### CURLE_SEND_ERROR
[INF] curl.cpp:RequestPerform(2621): ### retrying...
[INF] curl.cpp:RemakeHandle(2248): Retry request. [type=9][url=https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=5&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1][path=/ant/MyHome automation guide 72488.pdf]
* Hostname s3.fr-par.scw.cloud was found in DNS cache
* Trying 2001:bc8:1002::30:443...
* TCP_NODELAY set
* Connected to s3.fr-par.scw.cloud (2001:bc8:1002::30) port 443 (#6)
* successfully set certificate verify locations:
* CAfile: /etc/pki/tls/certs/ca-bundle.crt
CApath: none
* SSL re-using session ID
* SSL_write() returned SYSCALL, errno = 32
* Closing connection 5
[ERR] curl.cpp:RequestPerform(2546): ### CURLE_SEND_ERROR
* old SSL session ID is stale, removing
* SSL connection using TLSv1.2 / ECDHE-RSA-CHACHA20-POLY1305
* Server certificate:
* subject: CN=s3.fr-par.scw.cloud
* start date: Feb 10 23:20:22 2020 GMT
* expire date: May 10 23:20:22 2020 GMT
* subjectAltName: host "s3.fr-par.scw.cloud" matched cert's "s3.fr-par.scw.cloud"
* issuer: C=US; O=Let's Encrypt; CN=Let's Encrypt Authority X3
* SSL certificate verify ok.
> PUT /tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=5&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1 HTTP/1.1
Host: s3.fr-par.scw.cloud
User-Agent: s3fs/1.86 (commit hash 005a684; OpenSSL)
Accept: */*
Content-Length: 10485760
Expect: 100-continue
* SSL_write() returned SYSCALL, errno = 32
* Closing connection 6
[ERR] curl.cpp:RequestPerform(2546): ### CURLE_SEND_ERROR
* Mark bundle as not supporting multiuse
< HTTP/1.1 403 Forbidden
< x-amz-id-2: tx97bf2f1b3ccd47c4a5f91-005eaa999a
< x-amz-request-id: tx97bf2f1b3ccd47c4a5f91-005eaa999a
< Content-Type: application/xml
< Date: Thu, 30 Apr 2020 09:25:46 GMT
< Transfer-Encoding: chunked
* HTTP error before end of send, keep sending
<
[INF] curl.cpp:RequestPerform(2621): ### retrying...
[INF] curl.cpp:RemakeHandle(2248): Retry request. [type=9][url=https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=2&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1][path=/ant/MyHome automation guide 72488.pdf]
[ERR] curl.cpp:RequestPerform(2639): ### giving up
[WAN] curl.cpp:MultiPerform(4340): thread failed - rc(-5)
[INF] curl.cpp:insertV4Headers(2797): computing signature [PUT] [/ant/MyHome automation guide 72488.pdf] [partNumber=6&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1] [34ec149b334729973e407bada5e11b96774acfd1375b8009f789474ecb9bb2bb]
[INF] curl.cpp:url_to_host(99): url is https://s3.fr-par.scw.cloud
* Hostname s3.fr-par.scw.cloud was found in DNS cache
* Trying 2001:bc8:1002::30:443...
* TCP_NODELAY set
* Connected to s3.fr-par.scw.cloud (2001:bc8:1002::30) port 443 (#7)
* successfully set certificate verify locations:
* CAfile: /etc/pki/tls/certs/ca-bundle.crt
CApath: none
* SSL re-using session ID
* SSL connection using TLSv1.2 / ECDHE-RSA-CHACHA20-POLY1305
* Server certificate:
* subject: CN=s3.fr-par.scw.cloud
* start date: Feb 10 23:20:22 2020 GMT
* expire date: May 10 23:20:22 2020 GMT
* subjectAltName: host "s3.fr-par.scw.cloud" matched cert's "s3.fr-par.scw.cloud"
* issuer: C=US; O=Let's Encrypt; CN=Let's Encrypt Authority X3
* SSL certificate verify ok.
> PUT /tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=6&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1 HTTP/1.1
Host: s3.fr-par.scw.cloud
User-Agent: s3fs/1.86 (commit hash 005a684; OpenSSL)
Authorization: AWS4-HMAC-SHA256 Credential=xxxxxx/20200430/fr-par/s3/aws4_request, SignedHeaders=host;x-amz-content-sha256;x-amz-date, Signature=91bbf50cc33a1f1d1cd3f3660fcc116e857223b4f8297b6c796e7dc32f244bac
x-amz-content-sha256: 34ec149b334729973e407bada5e11b96774acfd1375b8009f789474ecb9bb2bb
x-amz-date: 20200430T092546Z
Content-Length: 1132789
Expect: 100-continue
[INF] curl.cpp:RequestPerform(2621): ### retrying...
[INF] curl.cpp:RemakeHandle(2248): Retry request. [type=9][url=https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=1&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1][path=/ant/MyHome automation guide 72488.pdf]
[ERR] curl.cpp:RequestPerform(2639): ### giving up
* Mark bundle as not supporting multiuse
< HTTP/1.1 100 Continue
* SSL_write() returned SYSCALL, errno = 32
* Closing connection 6
[ERR] curl.cpp:RequestPerform(2546): ### CURLE_SEND_ERROR
[INF] curl.cpp:RequestPerform(2621): ### retrying...
[INF] curl.cpp:RemakeHandle(2248): Retry request. [type=9][url=https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=3&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1][path=/ant/MyHome automation guide 72488.pdf]
[ERR] curl.cpp:RequestPerform(2639): ### giving up
[INF] curl.cpp:RequestPerform(2621): ### retrying...
[INF] curl.cpp:RemakeHandle(2248): Retry request. [type=9][url=https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=4&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1][path=/ant/MyHome automation guide 72488.pdf]
[ERR] curl.cpp:RequestPerform(2639): ### giving up
[INF] curl.cpp:RequestPerform(2621): ### retrying...
[INF] curl.cpp:RemakeHandle(2248): Retry request. [type=9][url=https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=5&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1][path=/ant/MyHome automation guide 72488.pdf]
[ERR] curl.cpp:RequestPerform(2639): ### giving up
* We are completely uploaded and fine
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< Content-Length: 0
< x-amz-id-2: tx64fa48b5fffb4985bee17-005eaa999a
< Last-Modified: Thu, 30 Apr 2020 09:25:46 GMT
< ETag: "30c5132a619a14608ff0a3d9bac63fe2"
< x-amz-request-id: tx64fa48b5fffb4985bee17-005eaa999a
< x-amz-version-id: 1588238746862950
< Content-Type: text/html; charset=UTF-8
< Date: Thu, 30 Apr 2020 09:25:59 GMT
<
* Connection #7 to host s3.fr-par.scw.cloud left intact
[INF] curl.cpp:RequestPerform(2455): HTTP response code 200
[WAN] curl.cpp:MultiPerform(4374): thread failed - rc(-5)
[WAN] curl.cpp:MultiPerform(4374): thread failed - rc(-5)
[WAN] curl.cpp:MultiPerform(4374): thread failed - rc(-5)
[WAN] curl.cpp:MultiPerform(4374): thread failed - rc(-5)
[WAN] curl.cpp:MultiRead(4400): error from callback function(https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=1&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1).
[WAN] curl.cpp:MultiRead(4400): error from callback function(https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=2&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1).
[WAN] curl.cpp:MultiRead(4400): error from callback function(https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=3&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1).
[WAN] curl.cpp:MultiRead(4400): error from callback function(https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=4&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1).
[WAN] curl.cpp:MultiRead(4400): error from callback function(https://s3.fr-par.scw.cloud/tellurix/ant/MyHome%20automation%20guide%2072488.pdf?partNumber=5&uploadId=YmNkMmE3MWMtMDFhYi00NDhmLTlkYWItMjEyMDA1YTM1Njk1).
[INF] curl.cpp:CompleteMultipartPostRequest(3642): [tpath=/ant/MyHome automation guide 72488.pdf][parts=6]
[ERR] curl.cpp:CompleteMultipartPostRequest(3653): 1 file part is not finished uploading.
[INF] s3fs.cpp:s3fs_release(2358): [path=/ant/MyHome automation guide 72488.pdf][fd=11]
[INF] cache.cpp:DelStat(582): delete stat cache entry[path=/ant/MyHome automation guide 72488.pdf]
[INF] fdcache.cpp:GetFdEntity(2650): [path=/ant/MyHome automation guide 72488.pdf][fd=11]
I successfully mounted and wrote a 500 MB file to scaleway using your command-line arguments. Given the CURLE_SEND_ERROR I wonder if you have some kind of network problem? Maybe try a lower value for -o parallel_count, e.g., 1? See https://github.com/s3fs-fuse/s3fs-fuse/issues/1283#issuecomment-623026911 for the resolution.
From where do you mount your bucket? Is it your PC in your home or a cloud VM? How much time does it take before you receive this error?
I'm asking because "SSL_write() returned SYSCALL, errno = 32" looks like something is closing your connection. "HTTP error before end of send, keep sending" also points for that kind of problem. A timeout maybe occurs? Do you have a NAT gateway between you and your bucket? That can also cause the problem, if it does not care about keepalives as the upload can take relatively long.
As the s3fs wiki says, 20MB is the threshold for multipart uploads instead of single request. Maybe Scaleway has a slightly different API for multipart uploads than Amazon? From the s3fs wiki: "Some providers do not support the full S3 API, e.g., lacking multi-part upload." Please make note that s3fs is mainly intended to work with Amazon S3 and, as I see, Scaleway is not on the list of supported providers in the s3fs wiki: https://github.com/s3fs-fuse/s3fs-fuse/wiki/Non-Amazon-S3.
The last thing, what's your version of libcurl? The s3fs documentation says it should be 7.16 or 7.17. And are you using the latest version of s3fs?
I have a GKE cluster (gke v1.13.6) and using istio (v1.1.7) with several services deployed and working successfully except one of them which always responds with HTTP 503 when calling through the gateway : upstream connect error or disconnect/reset before headers. reset reason: connection failure.
I've tried calling the pod directly from another pod with curl enabled and it ends up in 503 as well :
$ kubectl exec sleep-754684654f-4mccn -c sleep -- curl -v d-vine-machine-dev:8080/d-vine-machine/swagger-ui.html
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0* Trying 10.3.254.3...
* TCP_NODELAY set
* Connected to d-vine-machine-dev (10.3.254.3) port 8080 (#0)
> GET /d-vine-machine/swagger-ui.html HTTP/1.1
> Host: d-vine-machine-dev:8080
> User-Agent: curl/7.60.0
> Accept: */*
>
upstream connect error or disconnect/reset before headers. reset reason: connection failure< HTTP/1.1 503 Service Unavailable
< content-length: 91
< content-type: text/plain
< date: Thu, 04 Jul 2019 08:13:52 GMT
< server: envoy
< x-envoy-upstream-service-time: 60
<
{ [91 bytes data]
100 91 100 91 0 0 1338 0 --:--:-- --:--:-- --:--:-- 1378
* Connection #0 to host d-vine-machine-dev left intact
Setting the log level to TRACE at the istio-proxy level :
$ kubectl exec -it -c istio-proxy d-vine-machine-dev-b8df755d6-bpjwl -- curl -X POST http://localhost:15000/logging?level=trace
I looked into the logs of the injected sidecar istio-proxy and found this :
[2019-07-04 07:30:41.353][24][debug][router] [external/envoy/source/common/router/router.cc:381] [C119][S9661729384515860777] router decoding headers:
':authority', 'api-dev.d-vine.tech'
':path', '/d-vine-machine/swagger-ui.html'
':method', 'GET'
':scheme', 'http'
'cache-control', 'max-age=0'
'upgrade-insecure-requests', '1'
'user-agent', 'Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/75.0.3770.100 Safari/537.36'
'accept', 'text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3'
'accept-encoding', 'gzip, deflate'
'accept-language', 'fr-FR,fr;q=0.9,en-US;q=0.8,en;q=0.7'
'x-forwarded-for', '10.0.0.1'
'x-forwarded-proto', 'http'
'x-request-id', 'e38a257a-1356-4545-984a-109500cb71c4'
'content-length', '0'
'x-envoy-internal', 'true'
'x-forwarded-client-cert', 'By=spiffe://cluster.local/ns/default/sa/default;Hash=8b6afba64efe1035daa23b004cc255e0772a8bd23c8d6ed49ebc8dabde05d8cf;Subject="O=";URI=spiffe://cluster.local/ns/istio-system/sa/istio-ingressgateway-service-account;DNS=istio-ingressgateway.istio-system'
'x-b3-traceid', 'f749afe8b0a76435192332bfe2f769df'
'x-b3-spanid', 'bfc4618c5cda978c'
'x-b3-parentspanid', '192332bfe2f769df'
'x-b3-sampled', '0'
[2019-07-04 07:30:41.353][24][debug][pool] [external/envoy/source/common/http/http1/conn_pool.cc:88] creating a new connection
[2019-07-04 07:30:41.353][24][debug][client] [external/envoy/source/common/http/codec_client.cc:26] [C121] connecting
[2019-07-04 07:30:41.353][24][debug][connection] [external/envoy/source/common/network/connection_impl.cc:644] [C121] connecting to 127.0.0.1:8080
[2019-07-04 07:30:41.353][24][debug][connection] [external/envoy/source/common/network/connection_impl.cc:653] [C121] connection in progress
[2019-07-04 07:30:41.353][24][debug][pool] [external/envoy/source/common/http/conn_pool_base.cc:20] queueing request due to no available connections
[2019-07-04 07:30:41.353][24][trace][http] [external/envoy/source/common/http/conn_manager_impl.cc:811] [C119][S9661729384515860777] decode headers called: filter=0x4f118b0 status=1
[2019-07-04 07:30:41.353][24][trace][http] [external/envoy/source/common/http/http1/codec_impl.cc:384] [C119] parsed 1272 bytes
[2019-07-04 07:30:41.353][24][trace][connection] [external/envoy/source/common/network/connection_impl.cc:282] [C119] readDisable: enabled=true disable=true
[2019-07-04 07:30:41.353][24][trace][connection] [external/envoy/source/common/network/connection_impl.cc:440] [C121] socket event: 3
[2019-07-04 07:30:41.353][24][trace][connection] [external/envoy/source/common/network/connection_impl.cc:508] [C121] write ready
[2019-07-04 07:30:41.353][24][debug][connection] [external/envoy/source/common/network/connection_impl.cc:526] [C121] delayed connection error: 111
[2019-07-04 07:30:41.353][24][debug][connection] [external/envoy/source/common/network/connection_impl.cc:183] [C121] closing socket: 0
[2019-07-04 07:30:41.353][24][debug][client] [external/envoy/source/common/http/codec_client.cc:82] [C121] disconnect. resetting 0 pending requests
[2019-07-04 07:30:41.353][24][debug][pool] [external/envoy/source/common/http/http1/conn_pool.cc:129] [C121] client disconnected, failure reason:
[2019-07-04 07:30:41.353][24][debug][pool] [external/envoy/source/common/http/http1/conn_pool.cc:164] [C121] purge pending, failure reason:
[2019-07-04 07:30:41.353][24][debug][router] [external/envoy/source/common/router/router.cc:644] [C119][S9661729384515860777] upstream reset: reset reason connection failure
[2019-07-04 07:30:41.353][24][trace][http] [external/envoy/source/common/http/conn_manager_impl.cc:1200] [C119][S9661729384515860777] encode headers called: filter=0x4f0e5f0 status=0
[2019-07-04 07:30:41.353][24][trace][http] [external/envoy/source/common/http/conn_manager_impl.cc:1200] [C119][S9661729384515860777] encode headers called: filter=0x4f0edc0 status=0
[2019-07-04 07:30:41.353][24][debug][filter] [src/envoy/http/mixer/filter.cc:133] Called Mixer::Filter : encodeHeaders 2
[2019-07-04 07:30:41.353][24][trace][http] [external/envoy/source/common/http/conn_manager_impl.cc:1200] [C119][S9661729384515860777] encode headers called: filter=0x4f0f0e0 status=0
[2019-07-04 07:30:41.353][24][debug][http] [external/envoy/source/common/http/conn_manager_impl.cc:1305] [C119][S9661729384515860777] encoding headers via codec (end_stream=false):
':status', '503'
'content-length', '91'
'content-type', 'text/plain'
'date', 'Thu, 04 Jul 2019 07:30:41 GMT'
'server', 'istio-envoy'
Has anyone encountered such an issue ? If you need more info about the configuration, I can provide.
Thanks for your answer Manvar. There was no problem with the curl enabled pod but thanks for the insight. It was a misconfiguration of our tomcat port that was not matching the service/virtualService config.
When pod with an istio side car is started, the follwing things happen
an init container changes the iptables rules so that all the outgoing tcp traffic is routed to the sidecar istio-proxy on port 15001.
the containers of the pod are started in parallel (curl and istio-proxy)
If your curl container is executed before istio-proxy listens on port 15001, you get the error.
localhost to view pacts
I have installed brew version of postgres and docker.
Followed the steps in the link https://github.com/DiUS/pact_broker-docker/blob/master/POSTGRESQL.md to create a dockerised pact broker and postgres.
When I run the first command, container got created with error:
docker run --name pactbroker-db -e POSTGRES_PASSWORD=ThePostgresPassword -e POSTGRES_USER=admin -e PGDATA=/var/lib/postgresql/data/pgdata -v /var/lib/postgresql/data:/var/lib/postgresql/data -d postgres
Response:
b8a2007e5dac9554e0ac615147d74467ceb6043dba027a4a21388721cee8f34c
docker: Error response from daemon: Mounts denied:
The path /var/lib/postgresql/data
is not shared from OS X and is not known to Docker.
You can configure shared paths from Docker -> Preferences... -> File Sharing...
Somehow managed to bypass the first step by removing the bind volume option:
docker run --name pactbroker-db -e POSTGRES_PASSWORD=ThePostgresPassword -e POSTGRES_USER=admin -e PGDATA=/var/lib/postgresql/data/pgdata -d postgres
Succeeded 2 and 3 steps in the link specified:
(2)Connect to the container and execute psql via:
(3)Start the PactBroker container via:
After this, tried to curl json using the below command:
curl -v -XPUT -H “Content-Type: application/json” -d #/HelloWorldConsumer-HelloWorldProvider.json http://localhost/pacts/provider/HelloWorldProvider/consumer/HelloWorldConsumer/version/1.0
Getting the below response...
Could not resolve host: application
* Closing connection 0
curl: (6) Could not resolve host: application
* Trying ::1...
* connect to ::1 port 80 failed: Connection refused
* Trying 127.0.0.1...
* Connected to localhost (127.0.0.1) port 80 (#1)
> PUT /pacts/provider/HelloWorldProvider/consumer/HelloWorldConsumer/version/1.0 HTTP/1.1
> Host: localhost
> User-Agent: curl/7.49.1
> Accept: */*
> Content-Length: 756
> Content-Type: application/x-www-form-urlencoded
>
* upload completely sent off: 756 out of 756 bytes
< HTTP/1.1 415 Unsupported Media Type
< Content-Type: application/json;charset=utf-8
< Content-Length: 0
< Connection: keep-alive
< Status: 415 Unsupported Media Type
< Date: Tue, 07 Feb 2017 17:08:40 GMT
< Server: Webmachine-Ruby/1.4.0 Rack/1.2
< X-Powered-By: Phusion Passenger 5.0.15
<
* Connection #1 to host localhost left intact
Not sure whether its success or failure as the first line saying... 'Couldn't resolve host:application' and 'Closing connection'
And when I tried to view the localhost, it appears blank.
Screenshot attached.
Looking out for help as early as possible !! Thanks in advance...
It seems you are attempting to mount a volume on your host machine (/var/lib/postgresql/data) that does not exist.
docker: Error response from daemon: Mounts denied:
The path /var/lib/postgresql/data
is not shared from OS X and is not known to Docker.
The message clearly states this. You should read more about docker volumes, but I'd suggest you mount another directory if this is for development on your Mac.
Secondly, you can see that you're getting an "Unsupported media type" on the upload so it has definitely failed:
HTTP/1.1 415 Unsupported Media Type
It appears as though the Content-Type is not being correctly set, you can see this in the output:
Content-Type: application/x-www-form-urlencoded
Please check that the file actually exists at path /HelloWorldConsumer-HelloWorldProvider.json, that it is a valid JSON file, and that your content type header is formatted correctly (it appears to be).
I'm trying to set up a 'Swift All In One' system on a Ubuntu 12.04 VM by the link:http://docs.openstack.org/developer/swift/development_saio.html.
I use VMware WorkStation 12 Pro on Win7 64bit system and use 'Host-only' network mode.The VM ip address is "192.168.137.200".
When I run the command on the VM:
curl -v -H 'X-Storage-User: test:tester' -H 'X-Storage-Pass: testing' http://192.168.137.200/auth/v1.0
It works well.
But when I run the command on the host machine(Win7 platform), It fails and returns:
* Could not resolve host: test:tester'; Host not found
* Closing connection #0
curl: (6) Could not resolve host: test:tester'; Host not found
* Could not resolve host: testing'; Host not found
* Closing connection #0
curl: (6) Could not resolve host: testing'; Host not found
* About to connect() to 192.168.137.200 port 80 (#0)
* Trying 192.168.137.200... connected
* Connected to 192.168.137.200 (192.168.137.200) port 80 (#0)
> GET /auth/v1.0 HTTP/1.1
> User-Agent: curl/7.20.1 (amd64-pc-win32) libcurl/7.20.1 OpenSSL/0.9.8n zlib/1.
2.3
> Host: 192.168.137.200
> Accept: */*
>
< HTTP/1.1 401 Unauthorized
< Date: Fri, 25 Mar 2016 05:57:24 GMT
< Content-Length: 131
< Content-Type: text/html; charset=UTF-8
< Www-Authenticate: Swift realm="unknown"
< X-Trans-Id: tx081d67bec35b457bb4cb8-0056f4d343
< Vary: Accept-Encoding
<
<html><h1>Unauthorized</h1><p>This server could not verify that you are authoriz
ed to access the document you requested.</p></html>* Connection #0 to host 192.1
68.137.200 left intact
* Closing connection #0
Then I make another Ubuntu 12.04 VM and try to run the command above on the second VM, it works well.
Try to use X-Auth-User and X-Auth-Key headers instead.https://swiftstack.com/docs/cookbooks/swift_usage/auth.html