So i'm working on this project and i'm using it to finally learn how to animate in 3D (taking a small break from coding hehe)
So here i am faced with a problem and i have no idea what i did wrong. First let me explain how everything works.
So the Animator is attached to the player, and the player obviously has a structure of legs arms...etc
everything inside the player is being animated by this animator.
So i have a weapon (a wooden sword) that has it's pivot attached to it's bottom (in case it helps to know)
i'm animating it from that pivot point, which happens to be the parent to which the sword model is a child to.
When i hit the V key the weapon gets instantiated in the player's hand (which is an empty gameobject) and when i press the F key the player attack and activates a trigger in the animation that starts the attack animation.
But the animation is not working properly. more precisely the key frames of the weapon are not being player(as you can see in the video all the rotation axes give the coordinates of 0 0 0 throughout all the animation.
But, ...and this is where the strange things start!... when i manually go through each second to play the animation and see what's happening, you can see that those coordinates start to change and it shows the animation exactly as it's supposed to be. then when i switch back to idle state so that i can start moving around the player normally. when i hit the F key to attack the correct animation is player and no problem happens... Magic? i don't think so... :p
what do you think? what could be causing this problem.
Who's up to solve my riddle :cool:
Seriously guys what's going on here, i need help.o_O
Thank you all ;)
The Video : HERE
In general: You are using an ALPHA version 2019.3.0a4 ... in short don't.
As any alpha version it is like to have some bugs .. especially since you are not even using the latest instance of the alpha which afaik would be 2019.3.0a12!
2019.3.0b1 is actually even already in BETA state a lot of former bugs should be fixed there - but it is still a beta release meaning it is not ready for production.
So in general don't even use the beta. Rather stick to the latest stable release version which would now be 2019.2.3f1
There is not directly listed one relating to the animator not finding a certain object at first and then not animating it .. but as said alpha version are likely to have bugs. Also since it is an instantiated prefab the original instance will be gone .. then by name it gets re-assigned by the animator so the main issue might be that you instantiate it in the first place instead of just having it already from the beginning.
You should consider only using the parent/pivot object of that sword and not animate the sword itself at all. Simply spawn it as a child of the animated pivot and you should be fine,
Related
I'm learning Unity right now, and I want to animate a sprite of Mario running.
I found a spritesheet and have cut out 3 images.
I select my Mario game object and create a new animation
In the animation window, I put in 3 spites at the times I want to animation the run
When I press play, Mario is running, however he is also shifting position a little bit in the X direction but then resetting as the animation loops.
Why would my Mario object be shifting a little bit as part of the animation cycle? Where would I look to see an attached property or behavior that is causing him to do this? Maybe I moved the object while I had record on? I deleted all the associated animation objects and recreated them but Mario is still moving.
I figured it out. I had a pivot point created on a single frame of the sprites. This would screw it up.
I created a bunch of non-AI animations for enemies that do basic back.forth or up/down motions. Everything was working perfect until I started working on the Boss of the level. The boss has his own tag "Boss" and enemies have their own tag as well. Anyway, the problem is when I click start, every enemy leaves the game board. I can see them animated above the game board still doing their routines.
Any clue as to why this happened and how to fix it? I'd really, really hate to have to scrap all the enemies and start from scratch...
I used the Animation tool inside unity.
Extra Note: I created an EMPTY and moved all of my enemies into that Empty object to clean the hierarchy panel up. The animations were fine before this.
************** Currently Resolved **************
Whew! Okay, so apparently Unity doesn't like it when you move your animated stuff into an empty AFTER being animated. I FIXED them by simply removing them from the EMPTY that I had placed them in. However, I'd still like to know why this is. So any useful resources, links, manuals, personal insight/observations or anywhere I can read up on this would be appreciated!
Here is an explanation what happened:
The moment you dragged them all into the empty GameObject I guess this object probably wasn't placed on 0,0,0 in the Scene.
So Unity automatically changed all the local position values of your enemy items to fit the current position offset to the empty object.
Result: In the editmode they don't change their actual global position in the scene but their local position. This is supposed to happen if you just want to organize stuff.
However, now when you start the game and the animations are played, the animators change all the local positions to whatever is stored in your animations.
Result: all objects jump back to their original localPosition which had an offset to the empty GameObject.
To solve this make sure the empty GameObject is at position 0,0,0 and optimally has rotation 0,0,0 and scale 1,1,1 before you drag anything into it.
Easiest way to achieve that is by clicking reset in the empty objects Transform component before starting to drag stuff into it.
I am using Unreal Engine to create a puzzle game. In this game, the player has to pick up a chair/table and place it on a pressure plate in another part of the room in order to unlock a door.
When play testing, picking up objects causes my character to slide back. Once the sliding starts, there is no way to make the character stop sliding. I suspect that this issue may be caused by the object's collision volume entering the character's. However, when I release the object, my character keeps gliding backwards even though by then, the object's collision volume is out of reach.
On my character's blueprint I have locked rotation on all axes, so that it won't randomly start rolling backwards after picking up an object. This solves part of the issue but there is still the gliding that just won't stop.
I am new to UE and I have no idea what may be causing this issue. If you have any previous experience in this or simply want to chime in, please do!
Another alternative fix is to lock the rotation of the collision component in the default pawn that you have or to increase angular damping.
To do so, open the default pawn blueprint and under the physics section, then constraints, lock rotation in the X, Y, and Z axis. Or increase angular damping.
Dont know why this is happening exactly unless we see the actual settings you are using and the BP but when you pick up the object , disable its physics and collision and when you put it back enable it after a delay of 0.5 or 1 second . Hope this helps.
The problem:
I have a character model with a Nav Mesh Agent component. It moves perfectly well to any destination I tell it to move (using the NavMeshAgent.destination property).
But this suddenly fails as soon as I use an animation controller I downloaded from the store. The character won't run to it's destination; instead, it will endlessly run around it in circles.
I'm not sure why this happens, but I suppose the running animation somehow cripples the character's ability to turn. The Inspector, in the import setting of the relevant .fbx file shows: Average Angular Y Speed: 0.0 deg/s.
What I really, really fail to understand is why this keeps happening even though I have explicitely set NavMeshAgent.updatePosition and NavMeshAgent.updateRotation properties to true. The way I understand the documentation, this should make the character move as the Nav Mesh Agent wants it to move, and not as anything else (animations included) wants it to move?
How should I fix this problem? How should I force the animation not to meddle in the movement?
Do all your animation in place and use code to do the movement and you can uncheck root motion and use state machine values to get a better movement or use root motion and let mecanim`s retarget engine do the blending so go see for yourself what gets you better result , so I guess your problem is that your animation are not in place.
First: one of the biggest plus of Unity is its mecanim. Disabling root motion is negating a big advantage.
Second: the reason your character is running around probably is because the animator and the navmesh agent are issuing conflicting orders. Use updatePosition to false and updateRotation to true. Hence, the animator controls how fast you move and the navmesh agent controls the angular speed. Other posible cause is that your destination is unreachable. Check the Y component of the vectors and insure they are coplanar.
I have my "player" gameObject standing atop a platform. He press a combination of keys, I verify that he's standing on the right kind of platform, and I run this code:
Physics2D.IgnoreLayerCollision(playerLayer, plataformLayer);
The intention being that he'd drop down from the platform. Instead, nothing happen immediately. The player is still atop the platform and can move around - only if he gets out of it and tries to get back to it, only at that point will he fall down from it.
So I made a temporary ugly workaround:
Physics2D.IgnoreLayerCollision(playerLayer, plataformLayer);
rigidbody2D.AddForce(transform.up * jump / 1.5f);
This will force the player to jump, making Unity "recalculate" the collisions and the player will, as I want to, pass through the platform. The even weirder part is: if the jump isn't high enough (100 force at 1 mass with 0.5 gravity scale seems to be the minimum), the player will still land on the platform, even though Unity is supposed to be ignoring those collisions.
I also tried pushing the player downwards, both with force and direct velocity, but no luck - he still collides with the platform, he only stops colliding with it after being away from it once.
Also, my player Rigidbody2D Detection Mode is set to Continuous, and I tried setting the platform up in many different ways, with and without a Rigidbody2D.
Any ideas on how to make the player instantly fall down from the platform as soon as collisions start being ignored? Thanks in advance.
I had been having the exact same issue. I have an alternative solution that you may find to your liking.
Rather than disabling or moving the terrain to be ignored, temporarily set the rigidbody2D of your player gameObject to kinematic. This will not cause you to 'drop' through the platform as you would like - but it will allow you to create the illusion that you are, by briefly using transform.Translate (or Vector3.Lerp, if you like) to move your character down via code.
This will disable Rigidbody2D.AddForce, but will still allow for set movement via rigibdody2D.velocity, if that is preferable to manipulating the transform directly.
Ensure the downward velocity lasts only as long as you are Kinematic, and try to let it match the gravity of your game, and it looks pretty seamless.
If you turn the rigidbody back on too quickly, it can (even with ignoreLayers :/ ) still jump back up to the platform - but if you leave it on too long, you can drop through more than one intended one-way platform, or even :O through the bottom of the stage!
This is easily avoided if you can be careful - personally I used both MonoBehaviour.Invoke to set a very short time limit on how long the player would remain Kinematic (about 0.5 seconds), AND I disabled Kinematic as soon as they moved 0.5 units from the point where the 'hopDown' was initiated.
If your gravity / platforms / character scale are vastly different than my own, you may have to experiment with some different numbers.
This has been my first attempt at an answer on stackoverflow, so I hope it has been helpful!
One easy way to do this is after calling
Physics2D.IgnoreLayerCollision(playerLayer, plataformLayer);
You reset the player's layer:
player.gameObject.layer = playerLayer;
It's sounds like you have covered a ton of possible solutions to this problem before coming here so, good job there. I listed a few alternative ideas below. I hope they help. Good luck!
Remove the collision object from the platform itself.
Offset the collision object to be in some remote location so it will not interact with the player. Offsetting the object may cause the collision to have a similar reaction to the jump you mentioned.