SchemaSpy - Connection Failure - postgresql

I want to visualise my data base and tried using SchemaSpy, but I can't connect to the data base. It's a mysql data base, running on my computer, accessible under localhost and I called SchemaSpy with the following command:
java -jar schemaspy-6.0.0.jar -t mysql -dp postgresql-42.2.7.jar -db <name> -host <host> -p <port> -s <name> -u <user> -p <password> -o ./output/
I downloaded postgresql-42.2.7.jar as a driver and set the respective parameter in the call. I also tried not setting a driver at all, but it didn't change the output.
I get the following error message after trying to run SchemaSpy:
SchemaSpy generates an HTML representation of a database schema's relationships.
SchemaSpy comes with ABSOLUTELY NO WARRANTY.
SchemaSpy is free software and can be redistributed under the conditions of LGPL version 3 or later.
http://www.gnu.org/licenses/
INFO - Starting Main v6.0.0 on ####### with PID 10774 (/path/to/file started by ##### in /path/to/file)
INFO - The following profiles are active: default
WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by org.springframework.cglib.core.ReflectUtils$1 (jar:file:/path/to/file/schemaspy-6.0.0.jar!/BOOT-INF/lib/spring-core-4.3.13.RELEASE.jar!/) to method java.lang.ClassLoader.defineClass(java.lang.String,byte[],int,int,java.security.ProtectionDomain)
WARNING: Please consider reporting this to the maintainers of org.springframework.cglib.core.ReflectUtils$1
WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
WARNING: All illegal access operations will be denied in a future release
INFO - Found configuration file: schemaspy.properties
INFO - Started Main in 1.397 seconds (JVM running for 1.944)
INFO - Starting schema analysis
WARN - Connection Failure
I also tried setting the --illegal-access=warn parameter, but no changes.
Does anyone know what problem might be?
Thanks a lot!

Related

Failed to read postmaster.pid file while running embedded-postgres

My Spring application uses yandex-qatools/postgresql-embedded for executing Unit Tests.
While executing them, I am constantly getting the below error :
ERROR 75847 --- [ Test worker] r.y.q.embed.postgresql.PostgresProcess : Failed to read PID file (File '/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/db-content-4f285249-22ea-4625-b771-156adbf5851f/postmaster.pid' does not exist)
java.io.FileNotFoundException: File '/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/db-content-4f285249-22ea-4625-b771-156adbf5851f/postmaster.pid' does not exist
There is a warning popped up before the exception, but for now, let's ignore it.
WARN 75847 --- [ Test worker] r.y.q.embed.postgresql.PostgresProcess : Possibly failed to run initdb:
no data was returned by command ""/private/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/pgsql-10.3-1/pgsql/bin/postgres" -V"
The program "postgres" is needed by initdb but was not found in the
same directory as "/private/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/pgsql-10.3-1/pgsql/bin/initdb".
Check your installation.
I verified that no other instance of Postgress is running on my local machine using
ps -ef|grep postgres
Followed this thread as well, but it doesn't help.
Ran out of options to fix this, can anyone please suggest how to resolve it.
OSX version: 12.1
Thanks in advance
In my case, besides your error, I also could see the following error:
r.y.q.embed.postgresql.PostgresProcess : Possibly failed to run initdb:
initdb: invalid locale settings; check LANG and LC_* environment variables
This message led me to the solution. I just added the below environment properties to my .zshrc file:
export LANG="en_US.UTF-8"
export LC_ALL="en_US.UTF-8"
export LC_CTYPE="en_US.UTF-8"

Execution Chef Cookbook using chef-solo

I am trying to execute chef solo on my windows vm locally using Powershell. (I am trying to execute cookbook during provisioning customise Windows VM on cloud)
All cookbook recipe dependencies are available within the cookbook.
Create solo.rb for recipe execution & web.json to run recipe.
"type": "powershell",
"inline": "chef-client --chef-license=accept -z -o cookbooks\\cookbook_workstation"
Error:
WARN: Failed to read the private key C:\chef\client.pem: #<Errno::ENOENT: No such file or directory # rb_sysopen - C:\chef\client.pem>
WARN: Error while reporting run start to Data Collector. URL: https://localhost:443/data-collector Exception: No HTTP Code -- I cannot read C:\chef\client.pem, which you told me to use to sign requests!
FATAL: NoMethodError: undefined method logger' for nil:NilClass <internal:warning>:43:in warn': warning: Chef::Compliance::Runner#logger at C:/opscode/chef/embedded/lib/ruby/2.7.0/forwardable.rb:154 forwarding to private method NilClass#logger (StructuredWarnings::BuiltInWarning)
Using chef-solo so I don't need chef server - how can I overcome client.pem WARN and logger issue. Pointers would be very helpful

Enable FTRACE in ARM to trace realtime characteristic of system

I followed this article to enable FTRACE
https://lwn.net/Articles/365835/
to test a realtime system, my system uses arm cortexa15 (Description: https://mp.renesas.com/en-us/rzg/marketplace/board/RZGB000003.html)
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
But, it didn't work, caused the system hang-up when starting kernel.
Even referred How to Enable or configure ftrace module
I would like to test latency in the realtime system with cyclictest (option -b to trigger FTRACER)
cyclictest -a -t -n -p99 -f -b100
It generated dump message:
INFO: debugfs mountpoint: /sys/kernel/debug/tracing/
WARN: tracing_enabled or tracing_on not found
debug fs not mounted, TRACERs not configured?
could not set ftrace_enabled to 0
FATAL: Can't open /sys/kernel/debug/tracing/available_tracers for reading
I repeated a next step to enable a group of tracer configs:
CONFIG_FTRACE=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FUNCTION_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_LL=y
The result still was the same. Kernel hung and didn't show anything.
Anyone who deal with realtime system and Ftrace can help ? Thanks.
I resolve my problem. Below is a part of my defconfig file.
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACEPOINTS=y
CONFIG_STACKTRACE=y
CONFIG_NOP_TRACER=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_GENERIC_TRACER=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_STACK_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
After enabling Ftrace tool, the culprit can then be found in the trace output at /sys/kernel/debug/tracing/trace. The kernel function that was executed just before a latency of more than 100 microseconds was detected is marked with an exclamation mark.

Hawq init failed -- "postgres" is needed by initdb

After I build incubator-hawq on Centos7.1, I tried to init it. But the error below occurs:
20160516:18:10:43:002036 hawqinit.sh:host-172-16-0-105:hawqadmin-[INFO]:-Loading hawq_toolkit...
ALTER ROLE
20160516:18:10:44:001766 hawq_init:host-172-16-0-105:hawqadmin-[INFO]:-20160516:18:10:43:002036 hawqinit.sh:host-172-16-0-105:hawqadmin-[INFO]:-Loading hawq_toolkit...
20160516:18:10:44:001766 hawq_init:host-172-16-0-105:hawqadmin-[INFO]:-Master init successfully
20160516:18:10:44:001766 hawq_init:host-172-16-0-105:hawqadmin-[INFO]:-Init segments in list: ['hawq-master']
20160516:18:10:44:001766 hawq_init:host-172-16-0-105:hawqadmin-[DEBUG]:-Start to init segment on node 'hawq-master'
20160516:18:10:44:001766 hawq_init:host-172-16-0-105:hawqadmin-[INFO]:-Total segment number is: 1
fgets failure: Success
The program "postgres" is needed by initdb but was either not found in the same directory as "/usr/hawq/bin/initdb" or failed unexpectedly.
Check your installation; "postgres -V" may have more information.
20160516:18:10:45:002318 hawqinit.sh:host-172-16-0-105:hawqadmin-[ERROR]:-Postgres initdb failed
20160516:18:10:45:002318 hawqinit.sh:host-172-16-0-105:hawqadmin-[ERROR]:-Segment init failed on host-172-16-0-105
20160516:18:10:45:001766 hawq_init:host-172-16-0-105:hawqadmin-[INFO]:-20160516:18:10:45:002318 hawqinit.sh:host-172-16-0-105:hawqadmin-[ERROR]:-Postgres initdb failed
20160516:18:10:45:002318 hawqinit.sh:host-172-16-0-105:hawqadmin-[ERROR]:-Segment init failed on host-172-16-0-105
20160516:18:10:45:001766 hawq_init:host-172-16-0-105:hawqadmin-[ERROR]:-HAWQ init failed on hawq-master
20160516:18:10:46:001766 hawq_init:host-172-16-0-105:hawqadmin-[INFO]:-0 of 1 segments init successfully
20160516:18:10:46:001766 hawq_init:host-172-16-0-105:hawqadmin-[ERROR]:-Segments init failed, exit
When I type the command, the below shows:
[hawqadmin#host-172-16-0-105 hawqAdminLogs]$ postgres -V
postgres (HAWQ) 8.2.15
Any advice? Thanks!
If "postgres -V" works, that means the postgres binary is good.
Before you do "hawq init cluster", please make sure:
1) $GPHOME in greenplum_path.sh is correctly set to the directory of hawq binary, i.e, /usr/hawq in your case
2) source $GPHOME/greenplum_path.sh
3) check if initdb and postgres binary is in $GPHOME/bin
From the error you pasted above, 2 possible causes:
(1) The binary postgres called is not /usr/hawq/bin/postgres, You can use which postgres to check the path.
(2) The dependent lib for postgres may be wrong. You can use ldd for linux or otool for mac to print all dependent lib paths, and check them.
Moreover, if any error when init hawq, please check log in ~/hawqAdminLogs/, you may find out the specific error message.
Hope it will help you to find out the root cause.
Recently I faced same error while initializing cluster.
Postgres -V showed correct version, which postgres showed /usr/local/hawq/bin/postgres, also the path was already set, still faced above error.
Finally resolved by setting LD_LIBRARY_PATH to /usr/local/hawq/lib/ and sourced it via .bashrc file.
Looks like you might have installed hawq binaries in different directory . Please check the following
1.Make sure you have all the right PATH set
Check hawq initdb binaries are there in /usr/hawq/bin/ directory
make sure you have successed compile hawq and install them
check postgres is in the same dir with initdb
if there are more than 1 postgres in your pc, make sure the path of postgres(the same dir with initdb) is in your PATH.

Snorby not display alerts on main page

Building a Snort / Barnyard2 / Snorby setup.
Having trouble with getting snorby to see events.
Snort and barnyard2 are both running at boot.
Here is my config relevant to the problem.
Snort:
output unified2: filename snort.u2, limit 128
Barnyard2:
config reference_file: /usr/local/snort/etc/reference.config
config classification_file: /usr/local/snort/etc/classification.config
config gen_file: /usr/local/snort/etc/gen-msg.map
config sid_file: /usr/local/snort/etc/sid-msg.map
config hostname:localhost
config interface: eth1
input unified2
output database: log, mysql, user=snort password=snorbypass dbname=snorby host=localhost
Snorby:
snorby: &snorby
adapter: mysql
username: snort
password: "snorbypass"
host: localhost
rc.local:
ifconfig eth1 up
/usr/local/snort/bin/snort -D -u snort -g snort \
-c /usr/local/snort/etc/snort.conf -i eth1
/usr/local/bin/barnyard2 -c /usr/local/snort/etc/barnyard2.conf \
-d /var/log/snort \
-f snort.u2 \
-w /var/log/snort/barnyard2.waldo \
-D
Current status:
Right now, when the system boots, I can see both the snort and barnyard2 processes running as issued in the rc.local.
When browsing to localhost in a browser, I can login to Snorby and change password, etc...
I can also see the sensor listed under sensors.
When looking at the workers, there is one running. I have also deleted this from from withing the web ui and recreated it without any issues.
When looking in the database for snorby, I can "SELECT * from signature" and see alot of signatures listed here.
Also, I can see the size of the most recent /var/log/snort/snort.u2.1398021580 being constantly updated.
My barnyard.waldo is also in this directory and I can see it with data and you can see that it is no longer a text file, but a binary. This can be re-created by deleting the file re-creating a new barnyard2.waldo text file and restarting barnyard2. By doing so, the file will be turned into a binary file with the size of 2056.
The file ownership is snort:snort and the file permissions on the directory /var/log/snort is 666.
Possible problem??::
The only thing I can see that is not functioning correctly is when I stop barnyard2 and start without -D to see the startup.
I receive a repeating error:
--== Initialization Complete ==--
Using waldo file '/var/log/snort/barnyard2.waldo':
spool directory = /var/log/snort
spool filebase = snort.u2
time_stamp = 1398023768
record_idx = 0
Opened spool file '/var/log/snort/snort.u2.1398023768'
WARNING: No function defined to read header.
WARNING: No function defined to read header.
Closing spool file '/var/log/snort/snort.u2.1398023768'. Read 0 records
Opened spool file '/var/log/snort/snort.u2.1398024174'
WARNING: No function defined to read header.
Waiting for new data
WARNING: No function defined to read header.
WARNING: No function defined to read header.
WARNING: No function defined to read header.
WARNING: No function defined to read header.
WARNING: No function defined to read header.
WARNING: No function defined to read header.
There is very little on this error when I looked through Google, but I believe that barnyard2 is having trouble reading the snort,u2 file. You can see here that it seems to load it okay, but that is about it. Regardless, when looking in the Snorby UI, there are 0 events on the listed sensor.
Any ideas would be greatly appreciated.
Once I ran PulledPork to down load snort rules, I received a new sid-msg.map file for the version of snort currently running. Repeating error resolved.