I need to automatically move select code chunks from one rmd into another rmd. The current system uses copy/paste but I would like this process to be automated. I tried making the code chunks into their own R scripts (knitr::purl) and then calling those in the second rmd but the code chunks are plots and the figure captions are lost using the knitr::purl. Is there an efficient way of copying each code chunk so it is still usable in a second rmd?
I don't think it's a good idea to do this, as you will be duplicating code in the process, which may lead to different versions with different up-to-date states. This makes the maintenance of the different Rmd files almost impossible in the long run.
What you probably want to do better is to have an external script with your code chunks, and calling them into the context of you Rmd file with read_chunk():
Using an external R script with your document
This doesn't exactly answer your question, but I think it solves your problem.
Related
I want to build a simple script that may be useful for others as well, but I have only very basic programming knowledge and can't do it myself without learning how to write powershell scripts from scratch.
What this script is supposed to do is, open an INI file (really just a txt), look for a variable with an assigned value and replace that value from a txt hosted on GitHub, save and then run a program.
This is for the tracker list of qBittorrent, since that feature still hasn't been implemented and the only other script that I could find that does this is for linux and mac, there seem to be none for windows.
The basic idea is this:
get-content "c:\users\[user]\appdata\roaming\qbittorrent\qbittorrent.ini"
# This is where pseudo code starts
get file from "[github-link.txt]"
save file to cache # keeping it is useless as it gets updated daily
find variable "Session\AdditionalTrackers=" in qbittorrent.ini
replace value of variable with content of cached file # this is what I struggle with most when looking for example code. Everything I could find specified the exact string that needed replacing, which in this case is quite long and may change with every update of the file.
overwrite original file
launch program qbittorrent.exe
end script
Conveniently or most likely deliberately all (most) of the tracker lists on GitHub are already formatted in a way that they can be directly pasted into the file without having to worry about formatting. Example.
I can totally understand if nobody wants to do the work, but I would greatly appreciate it and possibly others that are looking for a stopgap for the lacking feature.
If this already exists, go ahead and call me an idiot and while you're at it drop a link ;)
I just found a little tool called Power Automate and it pretty much does what I was looking for. It's not quite as elegant as a single click script but it does the job. Sadly I can't share the "flow" I built because, well, there is no option for it - thanks Microsoft. So, I'll try my best to write it out.
Not quite a "solution" but pretty to close to it.
Here is the "flow":
get file from web // from github for example
read text from file // read downloaded .txt file
read text from file // read qBittorrent.ini
crop text // crop between flags in qBittorrent.ini use "Session\AdditionalTrackers=" as start and "Session\GlobalMaxRatio=" as end and save to cropVar2
crop text // crop before flag use "Session\AdditionalTrackers=" as flag and save to cropVar1
crop text // crop after flag use cropVar2 as flag and save to cropVar3
replace text // replace cropVar2 with content of downloaded file and save to cropVar2
write text to file // write cropVar1,cropVar2,cropVar3
end flow
Keep in mind that any changes to the qBittorrent.ini may change the order of the entries. Which means you have to check if it's still correct after every update and after every change you make in the options. This is a massive cludge after all...
You can input fail saves so that you won't break anything if the order changed.
Alright, here's what I'm dealing with (you can skip to TLDR if all you need to see is what I want to run):
I'm having an issue with file formatting for a nasty conglomeration of several ancient programs I've strung together. I have some data in .CSV format, and I need to put it into .SPC format. I've tried a set of proprietary MATLAB programs called 'GS tools' for fast and easy conversion, but fast and easy doesn't look like its gonna happen here since there are discrepancies in how .spc files are organized now and how they were organized back when my ancient programs were written.
If I could find the source code for the old programs I could probably alter the GS tools code to write my .spc files appropriately, but all I can find are broken links circa 2002 and earlier. Seeing as I don't know what my programs are looking for, I have no choice but to try resaving my data with other programs until one of them produces something workable.
I found my Cinderella program: if I open the data I have in a program called Spekwin and save the file with a .spc extension... viola! Everything else runs on those files. The problem is that I have hundreds of these files and I'd like to automate the conversion process.
I either need to extract the writing rubric Spekwin uses for .spc files (I believe that info is stored in a dll file within the program, but I'm not sure if that actually makes sense) and use it as a rule to write a file from my input data, or I need a piece of code that will open a file with Spekwin, tell Spekwin to save that file under the .spc extension, and terminate Spekwin.
TLDR: Need a command that tells the computer to open a file with a certain program, save that file under a different extension through that program (essentially open*.csv>save as>*.spc), then terminate the program.
OR--I need a way to tell MATLAB to write a file according to rules specified by a .dll, but I'm not sure I fully understand what that entails.
Of course I'm open to suggestions on other ways to handle this.
I need to replace a file on a zip using iOS. I tried many libraries with no results. The only one that kind of did the trick was zipzap (https://github.com/pixelglow/zipzap) but this one is no good for me, because what really do is re-zip the file again with the change and besides of this process be to slow for me, also do something that loads the whole file on memory and make my application crash.
PS: If this is not possible or way to complicated, I can settle for rename or delete an specific file.
You need to find a framework where you can modify how data is read and written. You would then use some form of mmap to essentially read and write small chunks. Searching on NSData and mmap resulted in this Post, however you can use mmap from the posix level too. Ps it will be slower than using pure memory no way around that.
Got it WORKING!! JXZip (https://github.com/JanX2/JXZip) has made exactly what I need, they link to libzip (http://www.nih.at/libzip/) that is a fully equiped library for working with ZIP files and JXZip have all the necessary Objective-C wrapper code. Thanks for all the replys.
For archive purposes, as the author of zipzap:
Actually zipzap does exactly what you want. If you replace an entry within a zip file, zipzap will do the minimum necessary to update it: it will skip writing all entries before the replaced entry, then write out the entry, then write out all entries after the replaced entry without recompressing. At the moment, it does require sufficient memory for the entries after the replaced entry though.
I was wondering if there's a way to allow a buffer to edit multiple files at once.
Recently, I got vim working with eclim. But now I was wondering if I could edit multiple files at once in one buffer. For example, say I have an interface and a class file where I need to update a method signature is there a way I can load both of them into the same buffer and edit them simultaneously. Narrow region for multiple file regions. It would also be awesome to remember my settings but that could be a future iteration.
I saw this solution but it seems inconvenient to create a separate file to handle this interaction.
You can open all files as split windows (so you see all of them together), and :windo, :bufdo, :argdo allow you to perform mass-operations (like a :substitute) on all of them at once. There's usually no need for such artificial concatenation schemes, and as the linked article shows, it has its downsides over keeping the files separate.
We are currently reading the file line by line which delays to read and complete for all.
we would need to read the file fastly and prgoress with our commands.
the commands which i tried using fork and array just displays me the first set of lines only and not proceeding with pther sets.
please help on it.
Reading a large file takes a fair bit of time - disks are slow, after all. Before you start looking at Perl, first try (assuming you're on a unix-type system):
time cat /path/to/your/large/file >/dev/null
The output will tell you how long it takes to just read that file from disk without doing anything to it. Alternately, open the file in your favorite text editor and time how long it takes to load. Once you have that time, compare it to how long your Perl program takes to read the file. Unless the Perl program takes significantly longer, you're not likely to be able to do anything about it because the time is being spent on getting the data from disk rather than on processing it.
Of course, that's assuming that you actually do need to read the entire file. If you can get by with only reading specific parts of it, then you could create an index file and use that to jump directly to the part that's of interest, but you haven't provided enough information for us to tell whether that would apply to your case or not.
If you need more specific help, please provide a better description of what you mean to accomplish and a small, runnable piece of Perl code which shows how you're currently reading and processing the file so that we can see whether you're doing anything particularly inefficient that can be improved on.