I want to upload raspbian into the microsd card.I can format with microsd card formatter.But i can’t upload raspbian img file.Im using win32disk imager.Problem is “error21 device is not ready” So the uploading is failed.I also tried to upload with balenaetcher but it is failed too.How can i upload raspbian?
Related
I have been trying to try OTA update on Raspberry Pi mentioned via their website https://learn.microsoft.com/en-in/azure/iot-hub-device-update/device-update-agent-provisioning
However, whenever we flash the SD card and boot up for the first time the device is getting stuck as in the image the raspberry Pi boot stuck
Could anyone please guide on what can be done so as to fix issue and go ahead?
I have purchased a raspberry pi 3 b+ kit from Amazon. No complaints, but recently I decided I would update NOOBS from 2.7 to 3.0.
When I connect the SD Card to my PC (Debian Stretch), it shows as if there’s 3 separate SD Cards. Being case sensitive, they’re called SETTINGS, System and Storage.
Why does this sd card show up as 3 separate card on my PC?
What I have tried:
I deleted the contents of System, Storage and SETTINGS and replaced
it with the files from NOOBS 3.0
I google searched for why the sd card shows as 3
I put my phone’s sd card into my PC and it showed as 1 sd card (but
I’m not willing to switch cards)
If you already run Debian on your PC, I would probably recommend you ignore NOOBS altogether, and just flash the whole Raspbian image to your SD card.
Then touch boot/ssh to start sshd and add a wpa_supplicant file to boot partition so your WiFi can connect.
When you then start your RasPi, just run sudo raspi-config and expand your root partition and all will be good.
I am facing problem to flash android 6.1 or android 8.0 img file.
I follow orange pi user manual instruction but at last I download SMART PHONE FLASH TOOL and trying to flash .img file but when I click download button it stuck and nothing happen.
I also installed driver for win7 64 bit.
and also connect Laptop and Orange pi using USB Data Cable.
Please help me.
Orange Pi version - 4G IoT
SD Card - Class 10, A1, 16GB
tool - Smart Phone Flash tool as in user manual instruction
SD card is not necessary, you can flash it to board internal storage.
To get it working you need to press and hold power button for 1-2 seconds, after board was connected to PC
I have two OS's Raspbian and RetroPie. Both are store on two separate micro SD cards. I have a Retropie's SD card connected to a usb adapter. In the picture you can see that the file is right above the terminal window. Right now if I want to switch back and forth I have to take the Raspbian SD card out of my Raspberry Pi and put in the RetroPie's SD card. I'm wondering if there's a way that I can just boot it through Raspbian. Any ideas?
I don't think the Raspberry Pi supports booting from USB but if you had a large enough SD card you could dual boot from the same SD card using NOOBS.
You will find everything you need here : HOW TO BOOT FROM A USB MASS STORAGE DEVICE ON A RASPBERRY PI3
But you will always need an SD card at the beginning. I think some people booted pi1 and 2 with usb by putting special boot files into the SD card. Needless to say, it will be easier with a pi3 !
I downloaded the necessary files for Raspberry Pi onto a MicroSD card, although the MicroSD card is no longer readable. When I put the card into the computer through a MicroSD to USB adapter nothing shows up in Windows Explorer. The card isn't present in Windows Disk Management either.
How do I fix the MicroSD card to get Raspberry Pi running properly?
If the Pi won't boot off it (ie can't read it) and Windows can't read it I would assume the card has died, is it a good brand or a no name one? It may be worth just grabbing another one to test with.