How to make VS Code's "Move Line Up" (or down) feature auto-apply appropriate indentation like Atom? - visual-studio-code

Let's say I have some xml like this:
<foo>
<bar>
Bad indentation here
</bar>
</foo>
You might not be able to tell, but the bad line is indented with tabs (3 of them), whereas the other lines are indented with spaces (3 of them). Frankly, that part doesn't matter -- just understand that the bad line has an inappropriate/inconsistent amount of indentation for this type of code (per my tab-stop settings).
In atom, if I use the move-line feature to move the bad line up and then back down, the indentation gets fixed -- it will change from tabs to the appropriate amount of spaces. (Or if it was already spaces, but just not the right amount per my tabstop settings, then that would have been fixed.)
How can I create a action + key-binding to make VS Code do this too?


In VS Code, extensions provide the necessary per-language logic to do document formatting and for better or worse, VS Code doesn't currently come with an XML formatter extension.
To resolve this:
Make sure the Language Mode (bottom right) is set appropriately (in this case, to XML)
Select the Format Document command from the palette
You should get a popup saying There is no formatter for 'xml-files' installed. (or something else, if you weren't dealing with XML)
Click the "Install Formatter..." button in the popup
Install something near the top with a decent star-rating and a lot of downloads (for XML, the "XML" extension by Red Hat would be a great choice)
Now that you have that, you can go back to your document. Make sure the tab-type and tab-size settings are appropriate. Once you've done that, the standard Move Line Up / Move Line Down commands should reformat indentation as expected.

Related

How can do auto-indent upon newline in VS Code like this

In this situation,
When I add newline at if (level >= curr_log_level),
at this setting,
It becomes
If I try other Editor: Auto Indent preferences, (keep, brackets, advanced, full), all the four settings give:
I don't want this either, what I want is:
I tried many different settings that VS Code offers,
but I couldn't find something that does what I want to do exactly.
CLion provided such formatting, but its debugging is too slow so I'm switching to VS Code.
Is there such formatting option?
If not, how can I customize formatting?

How can we configure our VSCode to format C code as per our custom coding standard?

How can we configure our VSCode to format C code as per our custom coding standard?
Formatting rules like -
Initial indentation is 4 spaces, next indentation is a tab, and one
more level of indentation is tab+4 spaces, another level is 2 tabs
and goes on.
And the opening braces to be on the same line as the if or for
statement?
How the indentation of the statement in the next line should be. Whether the statement inside if
statement should be indented or just be in the same column alignment as the if statement.
And so many other coding style formats.
When I was using Eclipse, I was able to create my custom profile and make all the necessary changes inside it like that -

how to freely format comments in cc-mode

I'm quite new to cc-mode and I'd like to configure it to allow me to freely format and use tabs in multiline comments. This is important to me because I want to use cog.py in my source file and need to be able to format the python source in the comment correctly. I'd be ok with comments not beeing autoindented at all, however I'd like to keep auto indenting the rest of the source code.
Example:
...
/*
[[[cog
import cog
for x in ['a','b','c']:
>cog.outl(x)
]]]
*/
...
In the line marked with > I'd like to press TAB to indent the line. cc-mode simply does nothing at all if i do so. I could use spaces there (which is inconvenient) but every (semi-)automatic re-indentation of this block would cause the spaces to vanish and therefore the python code to be incorrectly indented (which is what happens if i happen to press tab somewhere on this line after indenting it with spaces).
I tried to start emacs without my .init to be sure this is default behavior and not modified by my configuration so far. I've done google searches and read the documentation of the cc-mode variables / functions I stumbled upon (cc-mode online docs) while searching for a solution (i.e. c-indent-comments-syntactically-p, c-indent-command, c-tab-always-indent,...) but none of these seemed to solve my question.
EDIT1:
Thanks to abo-abo's idea of a "multi-major-mode" setup i've stumbled upon mmm-mode and have set up automatic switching to python mode for a cog section, which fixes most of my problems.
The only remaining problem is reindenting the whole file or a region containing a cog section. Can I somehow tell cc-mode to not change anything in comments while reindenting the file? mmm-mode + that would be a perfect solution for me.

You can use M-i to force a tab indent on the lines that you want, so you can use it to indent your comments.
You can also change your comments to use // instead. Just select your python code snippet, and do M-x comment-region:
// def foo(x):
// print 'hi'
Then the autoindent won't mess up your indentation.

What tool can do a visual comparison of two sections within the same file?

Good file comparison tools were already discussed to the pain, but my problem is more exotic. Is there any visual text comparison tool (like WinMerge) that would allow me easily do visual comparison on two sections within the same file?
I have multiple configurations within vcproj file and need to maintain them. It is a pain to do this manually -- splitting windows, scrolling character-by character. On top of that xml is very verbose and takes lots of screen real-estate. I cannot believe there is no tool to do automatic file section comparison, since this sounds like a very common problem.
Please, do not offer me to use property pages, I do not want more complexity, I want less. Splitting manually into files and then comparing them is also too medieval (I am doing this now anyways).

I use Beyond Compare (not free, but I think a shareware version is available). You can select the same file for left and right sides, then right-click the beginning of your section on each side and select "Align Manually". This would allow you to compare two sections of the same file relatively easily.
Overall, I highly recommend the product. I haven't tried version 3, which is what they currently have on their Web site, but version 2 is a fabulous tool. A+

Emacs Ediff.

I use UltraEdit for most of my text editing and they have a product called UltraCompare that does a visual compare.
Update by Mofi
UltraCompare Professional supports also a comparison of text snippets in addition to entire files.
After starting UltraCompare, select Text Compare in menu Mode if not already selected. Select in text editor the first text block which should be compared, press Ctrl+C, switch back to UC and paste with Ctrl+V the block into left text area pane. Switch again to text editor, select the other block in same file, press Ctrl+C, switch back to UC, click into right pane and paste the block with Ctrl+V. The two blocks are immediately compared and the differences are displayed.
Such a text snippet comparison for two blocks in same file can be started also directly from within UltraEdit. Select the first block in file, press Ctrl+C, Ctrl+N, Ctrl+V and Ctrl+A to copy, paste and reselect this block in a new file. Select the second block in file. Execute command Compare from menu File in UltraEdit with option Compare selected text automatically being enabled and click on button Compare. UC Professional is started with just the 2 selected blocks for comparison.

You can use Meld to do this
Open up meld without specifying file names
Meld with prompt which type of comparison you want. Choose file comparison
Meld will present the the icon to select the file names. Below that it will prompt for a Blank comparison. Choose that.
In the file comparison window, paste the sections of the file you want to compare.

How do you display code snippets in MS Word preserving format and syntax highlighting?

Does anyone know a way to display code in Microsoft Word documents that preserves coloring and formatting? Preferably, the method would also be unobtrusive and easy to update.
I have tried to include code as regular text which looks awful and gets in the way when editing regular text. I have also tried inserting objects, a WordPad document and Text Box, into the document then putting the code inside those objects. The code looks much better and is easier to avoid while editing the rest of the text. However, these objects can only span one page which makes editing a nightmare when several pages of code need to be added.
Lastly, I know that there are much better editors/formats that have no problem handling this but I am stuck working with MS word.

Here is the best way, for me, to add code inside word:
Go to Insert tab, Text section, click Object button (it's on the right)
Choose OpenDocument Text which will open a new embedded word document
Copy and paste your code from Visual Studio / Eclipse inside this embedded word page
Save and close
Advantages
The result looks very nice. Here are the advantages of this method:
The code keeps its original layout and colors
The code is separated from the rest of the document, as if it was a picture or a chart
Spelling errors won't be highlighted in the code (this is cool !)
And it takes only few seconds.

Download and install Notepad++ and do the following:
Paste your code in the window;
Select the programming language from the language menu;
Select the text to copy;
Right click and select Plugin commands -> Copy Text with Syntax Highlighting;
Paste it into MS Word and you are good to go!
Update 29/06/2013:
Notepad++ has a plugin called "NppExport" (comes pre-installed) that allows you to copy to RTF, HTML and ALL. It permits dozens of languages, whereas the aforementioned IDEs are limited to a handful each (without other plug-ins).
I use Copy all formats to clipboard and "paste as HTML" in MS word.

After reading a lot of related answers, I came across my own solution, which for me is the most suitable one.
Result looks like this:
As you can see, it is the same syntax highlighting like on Stack Overflow which is quite awesome.
Steps to reproduce:
on Stack Overflow
Goto Ask Question (preferably with Chrome)
Paste Code and add a language tag (e.g. Java) to get syntax hightlighting
Copy code from preview
in Word
Insert > Table > 1x1
Paste code (you may need to use Paste Special... > Formatted Text (RTF) from the Edit menu to not lose the syntax hilighting)
Table Design > Borders > No Border
Select code > Edit > Find > Replace
Search Document ^p (Paragraph Mark)
Replace With ^l (Manual Line Break)
(This is required to remove the gaps between some lines)
Select code again > Review > Language > check "Do not check spelling or grammar"
Finally add a caption using References > Insert Caption > New Label > name it "Listing" or sth
Sample code thanks to this guy

There is a nice Online Tool for that : https://www.troye.io/planetb/
Just copy the generated code and paste it into your word editing software. So far I've tried it on MS Word and WPS Writer, works really well.
Doesn't play nice with Firefox but works just fine on Chrome (and IE too, but who wants to use that).
One of the main benefits is that, unlike the Code Format Add-In for Word, it does NOT mess with your code, and respects various languages' syntax.
I tried many other options offered in other answers but I found this one to be the most efficient (quick and really effective).
There is also another online tool quoted in another answer (markup.su) but I find the planetB output more elegant (although less versatile).
Input :
Output :

I type my code in Visual Studio, and then copy-paste into word. it preserves the colors.

When I've done this, I've made extensive use of styles. It helps a lot.
What I do is create a paragraph style (perhaps called "Code Example" or something like that) which uses a monospaced font, carefully chosen tabs, a very light grey background, a thin black border above and below (that helps visibility a lot) and with spelling turned off. I also make sure that inter-line and inter-paragraph spacing are set right. I then create additional character styles on top (e.g., "Comment", "String", "Keyword", "Function Name Decl", "Variable Name Decl") which I layer on top; those set the color and whether the text is bold/italic. It's then pretty simple to go through and mark up a pasted example as being code and have it come out looking really good, and this is works well for short snippets. Long chunks of code probably should not normally be in something that's going to go on a dead tree. :-)
An advantage of doing it this way is that it is easy to adapt to whatever code you're doing; you don't have to rely on some IDE to figure out whatever is going on for you. (The main problem? Printed pages typically aren't as wide as editor windows so wrapping will suck...)

Maybe this is overly simple, but have you tried pasting in your code and setting the font on it to Courier New?

Try defining a style called 'code' and make it use a small fixed width font, it should look better then.
Use CTRL+SPACEBAR to reset style.

If you are using Sublime Text, you can copy the code from Sublime to MS Word preserving the syntax highlighting.
Install the package called SublimeHighlight.
In Sublime, using your cursor, select the code you want to copy, right click it, select 'copy as rtf', and paste into MS Word.

I'm using Easy Code Formatter. It's also an Office add-in. It allows you to select the coding style / and has a quick formatting button. Pretty neat.

In case you're like me and are too lazy or in a hurry and don't want to download additional software, you can use http://markup.su/highlighter/. It's very straight forward and supports several highlight themes and many programming languages. In my case I was using Visual Studio Code, which doesn't allow copying with format due to CSS involved in styling (as reported here).
Copy the text from the Preview box and then in Word go to Insert -> Textbox, paste the Preview from the website, highlight all the text, and then disable spell checking for that textbox.
This is what the code looks like finally.

The best way I found is by using the table.
Create a table with 1x1. Then copy the code and paste it.
If you're using the desktop app then it will inherit the code editor theme color and paste it accordingly, else you can change the table style to any color.
UPDATE ------------------
From Word 2021, you can directly paste the code and it will preserve the formatting. No need to create the table.
Thank you #RdC1965 for mentioning this.

This is a bit indirect, but it works very nicely. Get LiveWriter and install this plugin:
http://lvildosola.blogspot.com/2007/02/code-snippet-plugin-for-windows-live.html
Insert your code using the plugin into a blog post. Select all and copy it to Word.
It looks great and can include line numbers. It also spans pages decently.
HTH
Colby Africa

Vim has a nifty feature that converts code to HTML format preserving syntax highlighting, font style, background color and even line numbers. Run :TOhtml and vim creates a new buffer containing html markup.
Next, open this html file in a web browser and copy/paste whatever it rendered to Word. Vim tips wiki has more information.

In my experience copy-paste from eclipse and Notepad++ works directly with word.
For some reason I had a problem with a file that didn't preserve coloring. I made a new .java file, copy-paste code to that, then copy-paste to word and it worked...
As the other guys said, create a new paragraph style. What I do is use mono-spaced font like courier new, small size close to 8px for fonts, single spaced with no space between paragraphs, make tab stops small (0.5cm,1cm,..,5cm), put a simple line border around the text and disable grammar checks. That way i achieved the line braking of eclipse so I don't have to do anything more.
Hope I helped ;)

This is the simplest approach I follow. Consider I want to paste java code.
I paste the code here so that spaces, tabs and flower brackets are neatly formated http://www.tutorialspoint.com/online_java_formatter.htm
Then I paste the code got from step 1 here so that the colors, fonts are added to the code http://markup.su/highlighter/
Then paste the preview code got from step 2 to the MS word. Finally it will look like this

You can use VS code to keep code format and highlighting. Directly copy and paste code from VS.

you can simply use this Add-in on any office program.
Go to insert tab, then Get Add-ins, and search for Easy Syntax Highlighter
It supports
185 languages and 89 themes.
Automatic language detection.
Multi-language code highlighting.

Use a monospaced font like Lucida Console, which comes with Windows. If you cut/paste from Visual Studio or something that supports syntax highlighting, you can often preserve the colour scheme of the syntax highlighter.

Answer for people trying to resolve this issue in 2019:
Most answers to this question are outdated by now. I wish there was a way to reinspect old questions and answers every now and then!
The method I found for this question that works with Office 365 and its associated programs can be found here.

I'm using Word 2010 and I like copying and paste from a github gist. Just remember to keep source formatting!
I then change the font to DejaVu Sans Mono.
You can opt to copy with or without the numbering.

Copying into Eclipse and paste it in Word is also another option.

You can also use SciTE to paste code if you don't want to install heavy IDEs and then download plugins for all the code you're making. Simply choose your language from the language menu, type your code, high-light code, select Edit->Copy as RTF, paste into Word with formatting (default paste).
SciTE supports the following languages but probably has support for others: Abaqus*, Ada, ANS.1 MIB definition files*, APDL, Assembler (NASM, MASM), Asymptote*, AutoIt*, Avenue*, Batch files (MS-DOS), Baan*, Bash*, BlitzBasic*, Bullant*, C/C++/C#, Clarion, cmake*, conf (Apache), CSound, CSS*, D, diff files*, E-Script*, Eiffel*, Erlang*, Flagship (Clipper / XBase), Flash (ActionScript), Fortran*, Forth*, GAP*, Gettext, Haskell, HTML*, HTML with embedded JavaScript, VBScript, PHP and ASP*, Gui4Cli*, IDL - both MSIDL and XPIDL*, INI, properties* and similar, InnoSetup*, Java*, JavaScript*, LISP*, LOT*, Lout*, Lua*, Make, Matlab*, Metapost*, MMIXAL, MSSQL, nnCron, NSIS*, Objective Caml*, Opal, Octave*, Pascal/Delphi*, Perl, most of it except for some ambiguous cases*, PL/M*, Progress*, PostScript*, POV-Ray*, PowerBasic*, PowerShell*, PureBasic*, Python*, R*, Rebol*, Ruby*, Scheme*, scriptol*, Specman E*, Spice, Smalltalk, SQL and PLSQL, TADS3*, TeX and LaTeX, Tcl/Tk*, VB and VBScript*, Verilog*, VHDL*, XML*, YAML*.

If you are using Intellij IDEA, just copy the code from the IDE and paste it in the word document.

A web site for coloration with lots of languages.
http://hilite.me/
You can host one yourself since it is open source. The code is on github.

There really isn't a clean way to do it, and it could still look fishy based on your exact style settings.
What you could try to do is to first run a code-to-HTML conversion (there are many programs that do that), and then try to open up the HTML file with word, that might hopefully provide you with the formatted and pretty code, and then copy and paste it into your document.

I was also looking for it and ended up creating something for my code display.
Here's a good way:
Create a rectangular form and place your text inside.
Change the font to Consolas and size ~10.
Change the text font to gray near-black (gray 25%, darker 75%)
Use darker colors to highlight your text if needed and choose one to be the contour.

I have created an easier method using tables, as they are easier to create, manage, and more consistent (with the possibility to save the table's style inside the document itself), but I couldn't find a better way for code colouring scheme, sorry for that.
Steps:
Create a 3x3 table.
Select the table, and make its borders invisible ("No Borders" option), and activate "View Gridlines" option.
Make the adjustments to cells' spacing and columns' widths to get the desired aspect. (You will have to get in "Table Properties" for fine tuning).
Create a "Paragraph Style" with the name of "Code" just for your code snippets (as mentioned in https://stackoverflow.com/a/25092977/8533804)
Create another "Paragraph Style" with the name of "Code_numberline" that will be based upon the previous created style, but this you will add a numbering line in its definition (this will automate line numbering).
Apply "Code_numberline" to the first column, and "Code" to the 3 column.
Add a fill in the middle column.
Save that table style and enjoy!

The best presentation for code in documents is in a fixed-width font (as it should appear in an IDE), with either a faint, shaded background or a light border to distinguish the block from other text.

If its Java source code copy it to Visual Studio and then copy it back to Word.