I have a simple bat file that sets a directory and runs a perl on the directory.
cd Q:\Research\Images(new)\MuseumSpecimens\DBG\DBG_Specimens\DBG_ToBeRenamed
perl Q:\Research\Images(new)\MuseumSpecimens\DBG\DBG_Specimens\zbar\barcode.pl
I want to modify the bat file so that it runs the perl script on each sub directory within the directory (each folder within DBG_ToBe_Renamed) in this case. So far I have the following, but it isn't quite right.
FOR /R Q:\Research\Images(new)\MuseumSpecimens\DBG\DBG_Specimens\test\ %%G IN (.) DO perl Q:\Research\Images(new)\MuseumSpecimens\DBG\DBG_Specimens\zbar\barcode.pl
Thanks, I appreciate any help.
If it helps, the perl script reads barcodes from JPEGs and creates new files with the JPEG and associated RAW file renamed using the barcode value (https://github.com/psweeney-YU/reBar/blob/master/reBar.pl)
This should work:
for /D %%d in (Q:\Research\Images(new)\MuseumSpecimens\DBG\DBG_Specimens\DBG_ToBeRenamed\*) do pushd %%d && perl Q:\Research\Images(new)\MuseumSpecimens\DBG\DBG_Specimens\zbar\barcode.pl && popd
Related
I'm trying to use this script to assist technicians with renaming files that are found on an end users computer within their %appdata% folder. The script works up until this point, but I can't figure out how to take the output of the DIR search to use it as the current directory so I can modify the destination folder.
Basically, I need to make changes to this folder:
C:\users\bob\appdata\local\apps\2.0\'7'\'7'\time...exe_bfe88f94fc69adaa_0005.0011_none_b883acbb6e8d0075
The two 7's or wildcards are always different folder directory names, so that's why I can't use a static path to make changes to these folders. Anyways, here is the script so far, it works just fine in locating the folder I need, but I cannot seem to use the output to specify it as the target so I can make changes to it. Thank you for your help.
cd %appdata%
cd ..
cd local\apps\2.0
dir "time...exe_bfe88f94fc69adaa_0005.0011_none_39f58db4ac6311ec" /ad /s
I've tried using the pipeline argument (|) and the '&' and then using a rename command or a removedir, but it cannot find the file specified.
Thank you for your help!
Here's a batch-file which is a little more direct than just recursing the entire tree. It only steps over the two 'unknown' directory names, (%%~nxG\%%~nxH), and checks there for the named directory, (which you should edit as needed on line 3):
#Echo Off & SetLocal EnableExtensions
Set "DirName=time...exe_bfe88f94fc69adaa_0005.0011_none_39f58db4ac6311ec"
Set "BaseDir=%LocalAppData%\apps\2.0"
Set "AppPath="
For /D %%G In ("%BaseDir%\*")Do For /D %%H In ("%%G\*")Do For %%I In (
"%%H\%DirName%")Do If "%%~aI" GEq "d" Set "AppPath=%%~I"
If Not Defined AppPath Echo %DirName% Not Found & Pause & Exit /B 1
Echo %%AppPath%% = %AppPath% & Pause
Nothing else should be modified except for the last line which I added just to provide some output, (you/your technicians would use "%AppPath%" to reference the target directory from that point forward).
If you were looking for something in powershell, then perhaps this will push you in the right direction:
$DirName = "time...exe_bfe88f94fc69adaa_0005.0011_none_39f58db4ac6311ec"
$AppPath = (RvPa "$Env:LocalAppData\apps\2.0\*\*\$DirName").Path
$AppPath
Once again the last line is just to provide output and show you the variable you'll need to reference your target directory, and the first line will need editing as needed.
This code uses a FOR loop to find directory names that match. There is an ECHO inside the loop since I do not know if multiple directories could be found.
#ECHO OFF
CD "%APPDATA%\.."
FOR /F "delims=" %%A IN ('DIR /S /B /A:D "time...exe_bfe88f94fc69adaa_0005.0011_none_39f58db4ac6311ec"') DO (
ECHO Found directory "%%~A"
SET THEDIR=%%~A
)
DIR "%THEDIR%"
REN "%THEDIR%\file1.txt" "file2.txt"
I have two files :
perl file "Test.pl" at the location "C:\A1\A11\A12\A13\A14\A15"
bat file "TestBatch.bat" at the loc : "C:\A1\A11\A12\A13\B14"
The perl file "Test.pl" makes a call to the batch file "TestBatch.bat" and then the batch file should try to set the current path to be "C:\A1\A11\" and change the directory to "C:\A1\A11\A12\A13\B14"
But it fails saying the "System cannot find the path specified". I want it to change directory to "C:\A1\A11\A12\A13\B14"
Following is the code of both the files
Test.pl
my $abs_bat_file_loc = "C:\\A1\\A11\\A12\\A13\\B14\\TestBatch.bat";
system ($abs_bat_file_loc);
TestBatch.bat
set current_path=%CD%\..\..\..\..\
cd A12\A13\B14
Note : I ran the perl file in cmd prompt in following way:
cd C:\A1\A11\A12\A13\A14\A15
perl Test.pl
Any help is much appreciated. Thanks in advance!
Instead of
set current_path=%CD%\..\..\..\..\
cd A12\A13\B14
Why not replace it with
PushD %~dp0
this will force the working directory in the batch file to be the full location of where the batch file is located (eg; C:\A1\A11\A12\A13\B14)
I have to create an script to copy files from a folder structure to other.
My source folder structure is similar to this:
-RootFolder
--ParentFolder1
--SubParentFolder1
--ToCopy
/*Here are the files to copy*/
--SubParentFolder2
--ParentFolder2
--OtherSubParentFolder
--ToCopy
/*Here are the files to copy*/
--ParentFolder3
--OtherSubParentFolder2
I want to copy the files that are in the "ToCopy" folders, into another folder, with this structure:
Destination folder structure:
--TargetDirectory
--SubParentFolder1
//Here the files that were in the ToCopy folder inside the SubParentsFolder1
--OtherSubParentFolder
//Here the files that were in the ToCopy folder inside the OtherSubParentFolder
Notice that I use the name of the "ToCopy" parent folder in the destination subfolders.
I know how I would do this with code (like C#), but I am at a lost on how to achieve it with a Batch file. Is it even possible? Or I would need to use something like powershell?
How can I copy my files following the structure I described?
I think, this should work...
$Folder= gci -path "d:\pstest" -recurse -Filter "ToCopy" | where { $_.psiscontainer }
Foreach ($Foldername in $Folder) {
$Destinationfolder=$Foldername.Parent
copy-item $Foldername.fullname -Destination "d:\Outputfolder\$Destinationfolder" -recurse
}
Hi to follow is a script I hacked away (via help from stack overflow), that reads the files from a txt document, then requests destination folder input and also src folder name it then just goes and recursively copies all the files to the new folder without keeping the old subfolder structure.
I will update this in future with the link to the person that I got the base template from for the admin area, but to keep in mind once you click that Batch can run as though it was a php script then everything makes sense. Took me whole day to research every command and alternative on SS64.com
Major thing to note is the pushd "%~dp0" this I use to make sure batch always uses my current directory as root.
As said I will do a proper write up on this and further stream lining since I am using it actively for moving files during a woocommerce shop update. P.S. the text file name should be entered without the .txt extention and every file name should start on a new line. Also if the destination directory does not exist it will create it. Use excel maybe to list the names then for renaming could output to new column and compile the batch rename command copy to new batch run first batch to fetch files and second batch to rename to preferred title, I do it in steps to keep my sanity.
Sorry was just a example of how I use it, but yes go ahead and enjoy hope this works for you.
#echo off
CLS
setlocal EnableDelayedExpansion
REM Changes root path to relative of current bat folder
pushd "%~dp0"
REM finds files in provided .txt file and copies them to destination directory
REM CHECK FOR ADMIN RIGHTS
COPY /b/y NUL %WINDIR%\06CF2EB6-94E6-4a60-91D8-AB945AE8CF38 >NUL 2>&1
IF ERRORLEVEL 1 GOTO:NONADMIN
DEL %WINDIR%\06CF2EB6-94E6-4a60-91D8-AB945AE8CF38 >NUL 2>&1
:ADMIN
REM GOT ADMIN RIGHTS
COLOR 1F
ECHO Hi, %USERNAME%!
ECHO Please wait...
set /p DEST_DIR="Copy files to:"%=%
set /p SEARCH_DIR="Copy files from:"%=%
#echo.
#echo Please check folder name for accuracy.
#echo Copy files to: %DEST_DIR%
#echo Copy files from: %SEARCH_DIR%
set /p CORRECT_FOLDERS="Are these correct? (please check spelling) y/n:"
if '%CORRECT_FOLDERS%'=='y' GOTO:YES_ANSWER
if '%CORRECT_FOLDERS%'=='n' GOTO:NO_ANSWER
COLOR 2F
ECHO.
PAUSE
GOTO:EOF
:NONADMIN
REM NO ADMIN RIGHTS
COLOR 4F
ECHO.
ECHO PLEASE RUN AS ADMINISTRATOR
ECHO.
pause
GOTO:EOF
:YES_ANSWER
#echo.
#echo you answered yes
#echo.
if exist %DEST_DIR% GOTO:READ_DATA
if not exist %DEST_DIR% md %DEST_DIR%&GOTO:READ_DATA
PAUSE
:NO_ANSWER
#echo.
#echo you answered no
set /p TRY_AGAIN="Try again? y/n:"
if '%TRY_AGAIN%'=='y' GOTO:YES_ANSWER
if '%TRY_AGAIN%'=='n' GOTO:EXIT_PROGRAM
PAUSE
:EXIT_PROGRAM
#echo.
#echo "So Sorry"
PAUSE
GOTO:EOF
:READ_DATA
#echo.
set /p GET_FILENAMES="What is the name of the text file your filenames are stored in?"%=%
if exist %GET_FILENAMES%.txt #echo We will now read and copy the files for you, have some coffee might take awhile & GOTO:WRITE_DATA
if not exist %GET_FILENAMES%.txt #echo Filename does not match, please type only the name without .txt extention & GOTO:READ_DATA
PAUSE
:WRITE_DATA
#echo.
#echo reading file name...
for /f "usebackq delims=" %%a in ("%GET_FILENAMES%.txt") do (
for /r "%SEARCH_DIR%" %%b in ("%%a*") do (
#echo Copy Started...
copy "%%b" "%DEST_DIR%\%%~nxb"
)
)
#echo Copy finished, please review actions. Lekker Man.
PAUSE``
I have a program that I need to run via command line that I want to make a batch file for to save time. It looks for any files in the same directory with a specific extension and then runs the exe to manipulate the file. Something like:
example.exe option1 *.ext
Where .ext is a file with the correct type of extension it's looking for. The file type usually has different filenames, but always the same extension. The option is just something the program knows how to use so that can be ignored for now.
Trick is I only want this to run IF there isn't already another file in the same directory with the same name but a different extension.
I think I saw something about being able to use IF statements in batch files, but I have no idea how this would be done. Any ideas?
You can iterate yourself over the files:
for %%x in (*.ext) do (
if exist %%~n.someotherext example.exe option1 "%%x"
)
echo off
REM search .txt files.
for %%f in (*.txt) do (
REM skip if a .log file with the same name exists.
if not exist %%~nf.log (
echo Now executing %%f
notepad.exe %%f
REM Terminate the loop after the first succesful file
goto end
) else (
echo Skipping %%f
)
)
echo Nothing to process.
:end
pause
I have a daily process which generates some zip files out of files that are being created by other processes. I need to create a daily log file which indicates the timestamps the contents of one specific file of each zip file that is found.
I created the following batch script which seemed to work yesterday on my test system, but not anymore today, no idea why...
set VersionDirectory=C:\Test\VersionX\
set ResultOutputFile=C:\Test\LogFile.txt
for /f %%f in ('dir /b %VersionDirectory%\Installable\Packages\pattern*.zip') do (
mkdir %temp%\%%f\
unzip -extract -dir %VersionDirectory%\Installable\Packages\%%f %temp%\%%f\ > nul
for %%a in (%temp%\%%f\InstallScript.xml) do set InstallScriptXMLDate=%%~ta
rmdir /s /q %temp%\%%f\
echo %%f [package from %InstallScriptXMLDate%] >> %ResultOutputFile%
)
Short summary of what this file is supposed to do:
Loop through each pattern*.zip file in C:\Test\VersionX\ directory
unzip this file to the %temp%\%%f directory (where %%f is the filename)
Get the timestamp of the %temp%\%%f\InstallScript.xml and put it in the %InstallScriptXMLDate% variable
Delete the %temp%\%%f directory
Echo the filename (%%f) and timestamp (%InstallScriptXMLDate%) into the log file
As of now the log file just contains the filenames, followed by the string '[package from ]' string, but missing the actual date timestamp
The unzipping and removing of the zip files is working flawlessly, it's just the timestamp that's not being set.
You are setting a variable and using it in the same block. This cannot work in cmd because environment variables are expanded when a statement is parsed not when it's executed. So when the loop is run all variables have already been replaced with the values they had before the loop.
Put
setlocal enabledelayedexpansion
at the start of your batch and use !InstallScriptXmlDate! instead of %InstallScriptXmlDate%.
Another note: for is perfectly capable of iterating over files by itself, you almost never need to iterate over dir /b output with for /f. In fact, it can introduce problems that can be avoided with
for %%f in (%VersionDirectory%\Installable\Packages\pattern*.zip)