I try to create a rest-service from cxf-dosgi-project into my own maven-project. I don't understood the complex maven-pom-structure of the dosgi-rest-example at https://github.com/apache/cxf-dosgi/tree/master/samples/rest and are not able to transfer it. I tried many different dependencies and bundle-options.
I tried for hours to "copy" the example of https://github.com/apache/cxf-dosgi/tree/master/samples/rest in my own maven project with my own parent-pom. Always trying to copy the needed parts from dependencies, bundle-otions, ... But everytime i get a compiled bundle i get never a running rsa-endpoint.
The last test i tried i put at https://www.file-upload.net/download-13781406/circlead-rest-test.zip.html
When i run the example at https://github.com/apache/cxf-dosgi/tree/master/samples/rest in karaf it works like charm. So my skill is the problem to create my own karaf-rest-example on basis of the cxf-dosgi-rest-example. Have you a working example or can you explain to my how to use this example as base of a new rest-service as karaf-bundle?
Since a few days there is a new rest-example available with SCR. This works fine. See https://github.com/apache/karaf/tree/master/examples/karaf-rest-example/karaf-rest-example-scr
Related
I created a simple RME for TTeeGrid, a descendant perhaps of TGrid in Firemonkey. As shown below, the data are displayed at design time but not at runtime except the headers.
I've been breaking my head over this for weeks already but not luck.
Let me know if you need more details but what you see in the image are all you get.
I just need help to have the data displayed at runtime as shown in the design time.
UPDATE 1
This issue is not the case with TPrototypeBindSource. The data shown in the design time are displayed at runtime. Something is wrong somewhere.
I've never used the TeeGrid before, but the following worked fine
first time for me in Delphi Tokyo:
Download the TeeGrid trial from Steema.Com & install.
Create new multi-device app and place a TeeGrid and a FDMemTable on the form.
Load FDMemTable1 with the file Parts.Fds from the Delphi samples Data directory. Note, I did not then create any FieldDefs as I mentioned in my comment earlier as what I'm describing works without them.
Set the DataSource property of TeeGrid1 to FDMemTable1. TeeGrid1 immediately
creates columns for each of the Parts fields and populates them with data - see
screenshot below. I don't ordinarily include screenshots but in this case thought
I would as what I got was so clearly at odds with what you've reported.
Your TeeGrid etc are obviously more complicated than mine. so the best I can
suggest is that you backtrack to step 2 and see if you can replicate my result
with your data (either at design time or run time). It might be worth loading
your FDMemTable with some data at design time, as my impression is that live bindings
is less grief-prone when the datasource has some data.
Incidentally, fwiw the results of my own attempts to set up live bindings even with a regular TGrid have been rather patchy, until I discovered that instead of messing with the LB components myself, simply starting with a fresh TGrid, right-clicking on it and leaving the Live Bindings Wizard
to do its stuff consistently works fine.
Hello,
I'm an eclipse plugin development newbie looking for pointers to get me started on a particular project.
I am trying to build an eclipse plugin that will automatically construct a working set from a text file that simply consists of a list of file path names. The files/items need not share any parent directories. The rough idea is represented in the following diagram:
I am not asking for the solution to this task. That's the over-arching goal. To achieve that goal, I want to conquer some smaller goals first.
With that in mind, here's the smaller goal I'm currently trying to tackle:
In Eclipse, how can I prompt the user for a single file's path, and then add that file to an existing working set?
I'm not sure where to start. Should I work directly off of the existing org.eclipse.ui.workingSets extension point? Or should I use a collection of other extension points? How do I convert strings into something that can be added to a working set? Do I write code that directly modifies the workingsets.xml file?
Even with a much simpler goal, I still feel quite overwhelmed with the vastness of eclipse extension options. There are probably many ways to go about implementing something like this, but I just need one to get started.
Thanks a bunch!
To manipulate working sets you use the working set manager interface IWorkingSetManager. Get this with:
IWorkingSetManager manager = PlatformUI.getWorkbench().getWorkingSetManager();
From this you can get a particular working by name with:
IWorkingSet workingSet = manager.getWorkingSet("name");
The contents of a working set is an array of IAdaptable objects:
IAdaptable [] contents = workingSet.getElements();
You add to the contents by adding to this array and setting the contents:
IAdaptable [] newContents
.... get new array with old contents + new contents
workingSet.setElements(newContents);
A lot of Eclipse objects implement IAdaptable, for a file in the workspace you would use IFile. You can use dialogs such as ResourceSelectionDialog to select resources from the workspace.
I am running multiple specs using a Protractor configuration file as follows:
...
specs: [abc.js , xyz.js]
...
After abc.js is finished I want to reset my App to an initial state from where the next spec xyz.js can kick off.
Is there a well defined way of doing so in Protractor? I'm using Jasmine as a test framework.
You can use something like this:
specs: ['*.js']
But I recommend you to separate the specs with a suffix, such as abc-spec.js and xyz-spec.js. Thus your specs will be like this:
specs: ['*-spec.js']
This is done to avoiding the config file to be 'run'/tested if you put the config file in the same folder as your tests/spec files.
Also there is downside that the test will be run in 0 -> 9 and A -> Z order. E.g. abc-spec.js will run first then xyz-spec.js. If you want to define your custom execution order, you may prefix your spec files' names, for instance: 00-xyz-spec.js and 01-abc-spec.js.
To restart the app, sadly there is no common way (source) but you need to work around to achieve it. Use something like
browser.get('http://localhost:3030/');
browser.waitForAngular();
whenever you need to reload your app. It will force the page to be reloaded. But if your app uses cookie, you will also need to clean it out in order to make it completely reset.
I used a different approach and it worked for me. Inside my first spec I am adding Logout testcase which logouts from the app and on reaching the log in page, just clear the cookie before login again using following:
browser.driver.manage().deleteAllCookies();
The flag named restartBrowserBetweenTests can also be specified in a configuration file. However, this comes with a valid warning from the Protractor team:
// If [set to] true, protractor will restart the browser between each test.
// CAUTION: This will cause your tests to slow down drastically.
If the speed penalty is of no concern, this could help.
If the above doesn't help and you absolutely want to be sure that the state of the app (and browser!) is clean between specs, you need to roll out your own shellscript which gathers all your *_spec.js files and calls protractor --specs [currentSpec from a spec list/test suite].
I´m having some problems to create reports in my server without default export engine.
I´m using SpudSoft to create it. I have the following configuration:
Tomcat 7
Birt 4.2.2
uk.co.spudsoft.birt.emitters.excel_0.8.0.201310230652.jar
And i followed this tutorial:
spudsoft-birt-excel-emitters
I haven´t include this file
lib/slf4j-api-1.6.2.jar
because it´s not included in the *.jar file
and either wrote this code:
'if( "XLS".equalsIgnoreCase( outputFileFormat ) ) {
renderOption.setEmitterID( "uk.co.spudsoft.birt.emitters.excel.XlsEmitter" );
} else if( "XLSX".equalsIgnoreCase( outputFileFormat ) ) {
renderOption.setEmitterID( "uk.co.spudsoft.birt.emitters.excel.XlsxEmitter" );
}'
Because I dont really know where to use it.
to run my report i use the following URL
http://127.0.0.1:8090/birt-viewer/frameset?__format=xls&__report=informes/myReport.rptdesign&__emitterid=uk.co.spudsoft.birt.emitters.excel.XlsEmitter
and i get the following message:
org.eclipse.birt.report.service.api.ReportServiceException: EmitterID uk.co.spudsoft.birt.emitters.excel for render option is invalid.
What can i do to run SpudSoft report? I've been reading for a week and I haven´t found any solution!
Thanks a lot for all!
#Dominique,
I recommend upgrading from the emitter included with BIRT 4.3 (and given the lack of responses from the BIRT team I regret letting them put it in there).
Also, you don't need to use a specific IRenderOption type - they are all the same really anyway.
#Jota,
If you are getting that error it means that BIRT hasn't picked up the emitter correctly (you do have the correct emitter ID).
I don't use the BIRT war file, so my instructions aren't aimed at that approach (I just use the report engine in my own service).
The code snippet is no use for you, it's just a way to specify the emitter ID, which you are doing on the query string.
slf4j shouldn't be needed with the version of the emitter that you have - it uses JUL instead (I hate JUL, but it's one fewer dependency).
Can you post a complete listing of the jar files in your war?
It seems because you make use of a generic IRenderOption. With spudsoft emitter you should instantiate your render options like this:
EXCELRenderOption excelOptions = new EXCELRenderOption();
Note if you upgrade to BIRT 4.3 you don't have to set the emitter anymore, it is embedded
I'm using Tomcat-7.0.33 which has the built-in jsf-implementation Mojarra. Is that right?
I want to move to Apache MyFaces.
What i did, to achieve this:
I've removed from /WEB-INF/lib/
jsf-api-2.1.7
jsf-impl-2.1.7
Added in /WEB-INF/lib/:
myfaces-api-2.1.10
myfaces-impl-2.1.10
plus the 5 apache commons-jars
So my completly /lib-folder:
commons-beanutils-1.8.3
commons-codec-1.3
commons-collections-3.2
commons-digester-1.8
commons-logging-1.1.1
gson-2.2.2
jstl-1.2
myfaces-api-2.1.10
myfaces-impl-2.1.10
prettyfaces-jsf2-3.3.3
primefaces-3.4
I'm using Eclipse 4.2 (Juno). I've cleaned the Tomcat-Server.
When i request one of my pages, everything looks fine (even the source).
But my Managed-Beans does not work. Seems that JSF don't register/find them.
I guess i don't need to post my faces or beans here, because with mojarra it works fine.
MyFaces is conflicting with another instance of itself. The myfaces-bundle.jar already contains both the API and impl. You need to include either
myfaces-api.jar
myfaces-impl.jar
or
myfaces-bundle.jar
but not both.