Okay, maybe something wrong with unicode or etc, but the code tells everything:
$ cat leo
сказывать
ссказываю
сказав
BladeMight#Chandere ~ 23:24:58
$ cat leo | perl -pe 's/^с+каз/Рассказ/g'
Рассказывать
ссказываю
Рассказав
BladeMight#Chandere ~ 23:25:00
$ cat leo | sed -r 's/^с+каз/Рассказ/g'
Рассказывать
Рассказываю
Рассказав
I have file leo, contents in cyrillic, so i wanted to replace wrong places with the regex ^с+каз in perl -pe, but it replaces only the ones that have only 1 с(cyrillic one), e.g. + does nothing in this case(and for non-cyrillic it works fine), although in sed -r it works perfectly. Why could that be?
Perl needs to be told that your source code is UTF-8 (-Mutf8) and that it should treat stdin and stdout as UTF-8 (-CS).
$ cat leo | perl -Mutf8 -CS -pe 's/^с+каз/Рассказ/g'
Рассказывать
Рассказываю
Рассказав
Related
I'm looking for an equivalent of perl -pe. Ideally, it would be replace with sed if it's possible. Any help is highly appreciated.
The code is:
perl -pe 's/^\[([^\]]+)\].*$/$1/g'
$ echo '[foo] 123' | perl -pe 's/^\[([^\]]+)\].*$/$1/g'
foo
$ echo '[foo] 123' | sed -E 's/^\[([^]]+)\].*$/\1/'
foo
sed by default accepts code from command line, so -e isn't needed (though it can be used)
printing the pattern space is default, so -p isn't needed and sed -n is similar to perl -n
-E is used here to be as close as possible to Perl regex. sed supports BRE and ERE (not as feature rich as Perl) and even that differs from implementation to implementation.
with BRE, the command for this example would be: sed 's/^\[\([^]]*\)\].*$/\1/'
\ isn't special inside character class unless it is an escape sequence like \t, \x27 etc
backreferences use \N format (and limited to maximum 9)
Also note that g flag isn't needed in either case, as you are using line anchors
I have this list of files:
$ more files
one_this_2017_1_abc.txt
two_that_2018_1_abc.txt
three_another_2017_10.abc.txt
four_again_2018_10.abc.txt
five_back_2018_1a.abc.txt
I would like to get this output:
one_this_XXXX_YY_abc.txt
two_that_XXXX_YY_abc.txt
three_another_XXXX_YY.abc.txt
four_again_XXXX_YY.abc.txt
five_back_XXXX_YY.abc.txt
I am trying to remove the year and the bit after the year and replace them with another string--this is to generate test cases.
I can get the year just fine, but it's that one or two character piece after it I can't seem to match.
This should work, right?
~/test_cases
$ cat files | sed -e 's/_[[:digit:]]\{4\}_/_XXXX_/' -e 's/_[[:alnum:]]\{1,2\}_/_YY_/'
one_this_XXXX_YY_abc.txt
two_that_XXXX_YY_abc.txt
three_another_XXXX_10.abc.txt
four_again_XXXX_10.abc.txt
five_back_XXXX_1a.abc.txt
Except it doesn't for the 2 character cases.
$ cat files | sed -e 's/_[[:digit:]]\{4\}_/_XXXX_/' -e 's/_[[:alnum:]]\
{2\}_/_YY_/'
one_this_XXXX_1_abc.txt
two_that_XXXX_1_abc.txt
three_another_XXXX_10.abc.txt
four_again_XXXX_10.abc.txt
five_back_XXXX_1a.abc.txt
Doesn't work for the two character cases either, and this works not at all (but according to the docs it should):
$ cat files | sed -e 's/_[[:digit:]]\{4\}_/_XXXX_/' -e 's/_[[:alnum:]]\+_/_YY_/'
one_YY_XXXX_1_abc.txt
two_YY_XXXX_1_abc.txt
three_YY_XXXX_10.abc.txt
four_YY_XXXX_10.abc.txt
five_YY_XXXX_1a.abc.txt
Other random experiments that don't work:
$ cat files | sed -e 's/_[[:digit:]]\{4\}_/_XXXX_/' -e 's/_[a-zA-Z0-9]\+_/_YY_/'
one_YY_XXXX_1_abc.txt
two_YY_XXXX_1_abc.txt
three_YY_XXXX_10.abc.txt
four_YY_XXXX_10.abc.txt
five_YY_XXXX_1a.abc.txt
$ cat files | sed -e 's/_[[:digit:]]\{4\}_/_XXXX_/' -e 's/_[a-zA-Z0-9]\{1\}_/_YY_/'
one_this_XXXX_YY_abc.txt
two_that_XXXX_YY_abc.txt
three_another_XXXX_10.abc.txt
four_again_XXXX_10.abc.txt
five_back_XXXX_1a.abc.txt
$ cat files | sed -e 's/_[[:digit:]]\{4\}_/_XXXX_/' -e 's/_[a-zA-Z0-9]\{2\}_/_YY_/'
one_this_XXXX_1_abc.txt
two_that_XXXX_1_abc.txt
three_another_XXXX_10.abc.txt
four_again_XXXX_10.abc.txt
five_back_XXXX_1a.abc.txt
Tried with both GNU sed version 4.2.1 under Linux and sed (GNU sed) 4.4 under Cygwin.
And yes, I realize I can pipe this through multiple sed calls to get it to work, but that regex SHOULD work, right?
if your Input_file is same as shown sample then following may help you in same.
sed 's/\([^_]*\)_\([^_]*\)_\(.*_\)\(.*\)/\1_\2_XXXX_YY_\4/g' Input_file
Output will be as follows.
one_this_XXXX_YY_abc.txt
two_that_XXXX_YY_abc.txt
three_another_XXXX_YY_10.abc.txt
four_again_XXXX_YY_10.abc.txt
five_back_XXXX_YY_1a.abc.txt
I have the followiing input file and I need to remove all the characters from the strings that appear after the last '/'. I'll also show my expected output below.
input:
/start/one/two/stopone.js
/start/one/two/three/stoptwo.js
/start/one/stopxyz.js
expected output:
/start/one/two/
/start/one/two/three/
/start/one/
I have tried to use sed but with no luck so far.
You could simply use good old grep:
grep -o '.*/' file.txt
This simple expression takes advantage of the fact that grep is matching greedy. Meaning it will consume as much characters as possible, including /, until the last / in path.
Original Answer:
You can use dirname:
while read line ; do
echo dirname "$line"
done < file.txt
or sed:
sed 's~\(.*/\).*~\1~' file.txt
perl -lne 'print $1 if(/(.*)\//)' your_file
Try this GNU sed command,
$ sed -r 's~^(.*\/).*$~\1~g' file
/start/one/two/
/start/one/two/three/
/start/one/
Through awk,
awk -F/ '{sub(/.*/,"",$NF); print}' OFS="/" file
I have a file data.txt with the following strings:
text-common-1.1.1-SNAPSHOT.jar
text-special-common-2.1.2-SNAPSHOT.jar
some-text-variant-1.1.1-SNAPSHOT.jar
text-another-variant-text-3.3.3-SNAPSHOT.jar
I want to change all of the text-something-digits-something.jar to text-something-5.0.jar.
Here is my script with sed (GNU sed version 4.2.1
), but it doesn't work, I don't know why:
#!/bin/bash
for t in ./data.txt
do
sed -i "s/\(text-[a-z]*-(\d|\.)*\).*\(.jar\)/\15.0\2/" ${t}
done
What is wrong with my sed usage?
How about this awk
awk '/^text/ {sub(/[0-9].*\./,"5.0.")}1'
text-common-5.0.jar
text-special-common-5.0.jar
some-text-variant-1.1.1-SNAPSHOT.jar
text-another-variant-text-5.0.jar
text-something-digits-something.jar to text-something-5.0.jar
equal change digits-someting to 5.0
It also takes care of changing line only starting with text
I think a simpler approach might be enough: sed -r -e 's/(text-(.*-)?common-)([0-9\.]+)(-.*\.jar)/\15.0\4/' < your_data.
Another way of saying the same thing with perl: perl -pe 's/(text-(?:(.*-))*common-)([\d\.]+)(-.*\.jar)/${1}1.5${4}/' < your_data.
#!/bin/bash
for t in ./data.txt
do
sed -i '/^text-/ s/[.0-9]\{1,\}-something\(\.jar\)$/5.0\2/' ${t}
# for "any" something
#sed -i '/^text-/ s/[.0-9]\{1,\}-[^?]\{1,\}\(\.jar\)$/5.0\2/' ${t}
done
select string starting with text and change digit value is present
Using sed:
sed '/^text-/ s/-[0-9.]*-/-5.0-/' file
Any idea how to get rid of this irritating character U+0092 from a bunch of text files? I've tried all the below but it doesn't work. It's called U+0092+control from the character map
sed -i 's/\xc2\x92//' *
sed -i 's/\u0092//' *
sed -i 's///' *
Ah, I've found a way:
CHARS=$(python2 -c 'print u"\u0092".encode("utf8")')
sed 's/['"$CHARS"']//g'
But is there a direct sed method for this?
Try sed "s/\`//g" *. (I added the g so it will remove all the backticks it finds).
EDIT: It's not a backtick that OP wants to remove.
Following the solution in this question, this ought to work:
sed 's/\xc2\x92//g'
To demonstrate it does:
$ CHARS=$(python -c 'print u"asdf\u0092asdf".encode("utf8")')
$ echo $CHARS
asdf<funny glyph symbol>asdf
$ echo $CHARS | sed 's/\xc2\x92//g'
asdfasdf
Seeing as it's something you tried already, perhaps what is in your text file is not U+0092?
This might work for you (GNU sed):
echo "string containing funny character(s)" | sed -n 'l0'
This will display the string as sed sees it in octal, then use:
echo "string containing funny character(s)" | sed 's/\onnn//g'
Where nnn is the octal value, to delete it/them.