I have a worksheet where I can show a logarithmic graph for 'ALL' partitions and get exactly what I want. However, if I select to display only a particular partition, the displayed results are Not the same. The only difference is that I have a filter to select individual partitions.
This is a problem both in Desktop, and also on the Tableau Server. Tableau Version 2019.2
Notice partition 8702. The Blue line should hover just above or on the yellow area.
Thank you.
FIG 1.
The ALL display.
FIG 2.
The 8702 partition selected only.
I turned on Show Mark Labels. Now I can see that on an item (1400) there is a order-qty (blue line is 13) while the yellow sales mark is 12. Those are converted-to log numbers, but I see the 13 (order-qty) IS greater than the sales number (12)...... It's just not converting the two graphs on the same scale. I think that's my problem. Maybe I am misusing the logrithmic chart. Am hoping I am making sense..
RESOLVED: Once I realized there was a problem with the scales being different. I found that if I right-click on the Edit Axis, I can set the axis to Syncronized. I did this for both Axis's of the chart.
Related
I'm new to AWS and CloudWatch.
Here is a screenshot of a CloudWatch dashboard showing two parameters related to a Dynamo table.
As you can see in the pop-up the value of the sample for the orange timeseries is 2,252 while the value of the sample for the red timeseries is 7,000, yet the red chart is drawn under the orange chart. If you check the scale on the left, it seems the red series is the one that get drawn correctly, while the line of the orange one is somehow "inflated".
Can you please help me understand what is the reason behind this?
It looks like your mouse hover point data and the popup data are out of sync. Just a UI glitch.
The popup is showing 09:57 and probably on the chart at 09:57 those are the correct values.
The hover point you chose is a particular peak and is at what time? The last digit is cut off from the display but it's definitely not a 7! Looks like "09:50" maybe?
Minor UI glitch is my diagnosis.
Eventually I come up with this different set up, where one of the series has values mapped on the left Y-axis, while the other series has values mapped on the right Y-axis.
The main drawback is that the two series are not directly comparable, but at least the difference in value is more evident.
Trying to make a cute little dual axis line and bar chart, time is continuous on x axis, value on y axis. For some visual flair (formatting still being worked on) I wanted to make banded columns to show months, which are not calendar months (454 system) and are therefore variable lengths of time.
I got it functionally looking how I wanted to on the worksheet. When dragged to a dashboard, even after a ridiculous amount of resizing, I get these weird lines. When I change the size of it, the lines change places.
Anyone have tips on getting these two graphs to look the same?
Worksheet
Dashboard
I asked this question (and this question) recently, and even though both have solutions, I am left with a new dilemma because each solution only works on an independent level (i.e. one solution won't work if the other solution is in place).
The problem is this: In Tableau, I discovered that by opting to display the data as a percentage of the total row value Analysis > Percentage of > Row, it resulted in the count value also being displayed as a number between 0 and 1 (i.e. percentage format, because of the aforementioned percentage-only setting).
Is there a way to achieve a 100.00% stacked bar which shows both percentage AND count, and which also isn't formatted to display all data as a percentage of the row total?
The screenshot shows what happens when both solutions are in place. Original screenshots are available within the body of each of the previous questions.
Note: I feel that the right way to go about it might be to normalise my data (bringing all values to a scale between 0 and 1), but being new to Tableau, I am not sure how this is achieved. If this is correct, I would appreciate a walkthrough.
Right click on the second SUM({Number of Records]) pill on the Label shelf, and clear the table calc. Edit your label if needed
I have created a chart with 2 axes that acts as a panel chart (see image)
As a panel chart I only want to show the portions of the relevant y-axes to the chart next to them. For example, for the right-most y-axis I used a custom number format to exclude anything less than 0:
_(* #,##0_);_("";_(* 0??_);_(#_)
But for the left most y-axis, I'm stuck. I want to show -400 to positive 400. I've tried 2 different options, but neither is producing the desired effect.
[<0](#,##0);[>500000000]"";#,##0_)
[<0](#,##0);[<500000000]#,##0_);""
Here is the result I'm looking for:
I learned something new today (and a bit weird) regarding formats and chart axes
After some experimenting, this is what I ended up using:
[White][>500]_(#,##0_);(#,##0);0;
The odd part: When you change the Display Units of the axis (for me, millions), then the formatting no longer recognizes the original amount (500,000,000).
Once I figured that out, I was able to work out the solution.
I have created a sparkline in SSRS. Since the values are small i get a straight line graph How do i improve the sensitivity of the graph.
the difference is like for every month
60.06
60.40
60.14
You need to look at the Sparkline Vertical Axis Properties.
Testing with data like yours and a simple Tablix/Sparkline I get results similar to yours:
Opening the Vertical Axis Properties I can see Always include zero is checked by default:
Unchecking this option has a major effect on the sparkline:
So this is one way of doing it. Other than that changing the Minimum and Maximum values here will also have an effect - you just need to play around and find the right combination for you.