I am trying to do an insert into a micros sql anywhere table (not created by me) and am getting this error
ERROR [23000] [Sybase][ODBC Driver][SQL Anywhere]Constraint 'ASA6532' violated: Invalid value in table 'emp_def'
I can't find where the contraints on the table are defined nore am I able to figure out what this error is trying to tell me.
I have googled without any success - I have tried pulling the values off the insert one-by-one without success.
Could someone point me to where I might find what this error is trying to tell me?
Also, could someone tell me where to find custom-defined column types?
I found my specific error - a column is defined as int and a 8-digit value was being added which would seem to fit but did not - the error message from SQLAnywhere was terrible and did not tell me this, however. And I never did find the right page to translate the error codes properly
Related
I use datagrip as client to connect redshift and encounter a stranger issue which exhaust my whole day.
When I run my query sql the datagrip complains
[XX000] ERROR: invalid string enlargement request size 1073741823
It seemed that there dont exist a place that I can check more detail error log. And I google this error it also have very little similar question and it seemed maybe due to my field is too long which exceed the max length that redshift can accept. But actually, the story is not such for me I dont have long field, then I comment all my sql statement and re-add them incrementally to locate this issue statement.
Finally, I find the error-msg-triggered statement as below:
(
case when trunc(request_date_skip_weekend_tmp) = to_date('2022-03-21', 'YYYY-MM-DD')
then dateadd(day, 1, trunc(request_date_skip_weekend_tmp))
else request_date_skip_weekend_tmp end
)
request_date_skip_weekend,
After I change it with:
dateadd(day, 1, trunc(request_date_skip_weekend_tmp)) request_date_skip_weekend,
the error complain disappear, it is very hard for me to accept the relationship error message and the sql change, I dont know why my the former statement will trigger error complain.
I will appreciate if you can spot why the former expression error or share some knowledge about where can I fetch more detail error message to know what happened.
Your code snippet is dates and timestamps but the error is for strings. So it is likely you have identified a "trigger" and not root cause. Also since you report that the SQL is very long you could be dealing with compiler optimization changes, moving the failure. Removing a CASE can cause the compiler/optimizer to choose different structures for the query.
One experiment to try is to change the to_date() to a cast to timestamp so there are no implicit casts ('2022-03-21'::timestamp). This is unlikely the cause but it may help.
I expect you will need to post the query to get more help. How large is it? This error could be related to building a large string in the query OR could be related to the text of the query OR creating the output. This isn't a standard "string too long" message so this is something more implicit. You could post to a google doc or some other file sharing service. Just link in the question.
i habe named a collection 222. I want to copy that one but it doesn't work.
db.222.find()
2020-08-21T13:37:24.355+0200 E QUERY [js] SyntaxError: missing ; before statement #(shell):1:2
I am getting that error message. There should be a way to call columns that starts with a number like in other languages, but I don't know how...
hopefully someone had the same problem earlier and can help me.
best reagards and thanks!
You can use the getCollection function.
db.getCollection("222").find()
I am using PostgreSQL using unixodbc driver, and while trying to get connection, I get error. I am only printing the value of pfNativeError of SQLError, and I get a value of '26'.
I have gone through the error codes returned by postgresql, as listed here: http://www.postgresql.org/docs/8.1/static/errcodes-appendix.html#ERRCODES-TABLE
I wanted to know if unixodbc returns in pfNativeError just the last three characters of the error codes mentioned in link above? If that is true, I assume the only possibility is for the following error code:
22026 STRING DATA LENGTH MISMATCH string_data_length_mismatch
Do let me know if I am thinking in right direction. Also, this issue I've noticed only when the PostgreSQL has millions of rows, and the query which results in connection failure is trying to fetch a lot of data (10Ks). Can someone give any idea to why the problem might be happening?
EDIT 1:
If its of any help, I'm getting following values for szErrorMsg:
Error while executing the query
Could not send Query(connection dead)
EDIT 2:
'26' returned is in INTEGER, and the codes mentioned in link above are in HEX. 26 in decimal corresponds to 1A in hex. Unfortunately, it does not correspond to any thing in the above mentioned documentation. Clearly I am out of ideas! Can someone tell me what different pfNativeError codes correspond to?
I am having an issue using PostGIS (1.5.4) data. It may be that I'm just not familiar enough with this technology to see the obvious (I'm a regular expert with nearly 4 hours of experience), but I am running into an error that I have been unable to solve with Google.
I have a table which includes Polygon data (and yes, I checked; the column type is geometry, not polygon- the Postgres native type). The problem arises when I am trying to run a query on the table to find which shape contains a particular problem.
I am using the following query:
SELECT *
FROM geo_shape
WHERE ST_Contains(geoshp_polygon, POINT(-97.4388046000, 38.1112251000));
The error I receive is 'ERROR: function st_contains(geometry, point) does not exist'. I tried using a CAST() function, but got 'ERROR: cannot cast type geometry to polygon'. I'm guessing the issue has to do with the way the data is stored- PGAdmin shows it as hex data. I tried using ST_GeomFromHEXEWKB() just on a hunch, but received 'ERROR: function st_geomfromhexewkb(geometry) does not exist'.
I'm fairly confused as to what the issue is here, so any ideas at all would be much appreciated.
st_contains needs a geom,geom as arguments...
Give this a try...
SELECT * FROM geo_shape
WHERE ST_Contains(geoshp_polygon,
GeomFromText('POINT(-97.4388046000 38.1112251000)'));
Editted to correct , issue in the point data. ST_geomfromtext will work, kinda curious what the difference is there
You cannot mix PostgreSQL's geometric data types with PostGIS's geometry type, which is why you see that error. I suggest using one of PostGIS's geometry contstructors to help out:
SELECT *
FROM geo_shape
WHERE ST_Contains(geoshp_polygon,
ST_SetSRID(ST_MakePoint(-97.4388046000, 38.1112251000),4326);
Or a really quick text way is to piece together the well-known text:
SELECT 'SRID=4326;POINT(-97.4388046000 38.1112251000)'::geometry AS geom;
(this will output the WKB for the geometry type).
Im trying to insert a log record in my log table. But somehow when the field value lenght exceeds 199 chars, my apache restarts and my browsers says net::ERR_CONNECTION_RESET.
I'm using the Zend Framework, so I insert my record with the following lines of code:
$db = Global_Db_Connection::getInstance();
$sql = "INSERT INTO log_table (log) VALUES ('ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd')";
$db->query($sql);
If i dont use the framework, using:
mysql_query($sql);
Then i dont have any problems.
Anyone can tell me how to fix this limit in Zend?
Tried this on FreeBSD same problem. I also found out that when trying to insert it into a table that does not exist, it returns the same error. Only after shortening the value it gives the error that the table does not exist.
May be late to answer, but I have the soultion. Two solution for zend I found:
$db->getConnection()->query($sql); // use getConnection()
$db->exec($sql);
This issue is because of memory stack size. On linux the stack grows as needed, but on Windows & Mac this issue gets bubbled because of the stack size. For this there a ticket raised in php.net(here) Have a look. Enjoy!!!