I'm trying to set up my Bluehost account with python 3 so that I can use it with a flask site that I've created locally. I found instructions on how to do this at: http://multiactivelife.com/articles/install-python3-on-bluehost. I made it most of the way through, but I unfortunately get the following error when I try to run make install:
/usr/bin/install: cannot create regular file `/usr/local/bin/python3.7m': Read-only file system
make: *** [altbininstall] Error 1
I have tried to chmod to the bin directory (0755) but with no luck. Any idea on how I can get write access to my bin folder so that I can install python 3 on bluehost?
From the Bluehost website:
"Note: In order to install python locally, you will need to be added to the Compiler group. Please contact Support to request you be added to the Compiler group before proceeding."
https://www.bluehost.com/help/article/python-installation
Related
I use a nodejs App in the continuous delivery. Recently I installed a package (puppeteer) which fails to launch because it requires some shared librairies (xlib). This issue is documented (here) and I just need to install additionnal packages.
So I have added in my "BUILD" job additional lines:
#!/bin/bash
npm install
sudo apt-get update
sudo apt-get install -y --fix-missing libx11-6 libx11-xcb1 libxcb1 .......
It installs successfully (couple of errors though), the build job ends with success. (6 upgraded, 133 newly installed, 0 to remove and 55 not upgraded.)
But when I start the App in the "deploy" stage. the file is still missing!
Am I installing this properly?
2020-05-20T08:27:03.83+0000 [APP/PROC/WEB/0] ERR Unhandled Rejection at: Error: Failed to launch the browser process!
2020-05-20T08:27:03.83+0000 [APP/PROC/WEB/0] ERR /home/vcap/deps/0/node_modules/puppeteer/.local-chromium/linux-756035/chrome-linux/chrome: error while loading shared libraries: libX11-xcb.so.1: cannot open shared object file: No such file or directory
you may want to discuss this problem directly on our public Slack.
Self register here: https://ic-devops-slack-invite.us-south.devops.cloud.ibm.com/
then ask your question here https://ibm-devops-services.slack.com/
I suspect you should add the missing dependencies to your package.json
sorry to hear that registration did not work.
Simply go here https://ic-devops-slack-invite.us-south.devops.cloud.ibm.com/
put your email address
and get your invite.
You should receive an email to register - pick a password of your choice.
Anyhow, I'll check on your issue ASAP
1 - ensure puppeteer dependencies are installed without any errors.
You wrote "It installs successfully (couple of errors though)"
and "55 not upgraded".
Possibly, dependencies are not fully installed or at the required level.
2 - As suggested in previous comments, you are using the pipeline base image.
You may want to build and use your own custom image, an image that would match all your prereqs.
https://cloud.ibm.com/docs/ContinuousDelivery?topic=ContinuousDelivery-custom_docker_images
Ok got it sorted. data_Henrik was right from start.
What I was doing above in the deployment jobs was useless. It is NOT what will be deployed with the APP.
Instead, you need to deploy "multi buildpack" with (for my APP) the standard nodejs buildpack and also a buildpack specially made to install debian dependencies : https://github.com/cloudfoundry/apt-buildpack. example here: https://ict.swisscom.ch/2019/11/no-root-access-no-debian-packages-on-cloud-foundry-thats-past-with-the-apt-buildpack/
So for my nodejs app it ends up with:
1- a specific apt.yml files containing the list of dependencies (note I had to add a couple more eg libgbm-dev)
2- a specific multi-buildpack.yml containing the list of buildpacks
And that is it. I run the usual build and deploy jobs..
I am following the developers.squarespace.com documentation and I am trying to use a local dev environment to make my static website into a squarespace template. As far as getting the server started, everything is working fine until I get to the point of installing the squarespace server to my system. To beging, I use this command in my Mac's terminal:
npm install -g #squarespace/server
After I enter this, everything once again seems to be working correctly because I am met with this (which doesn't show any errors as I have seen for others):
Executing: npm run bundle
> #squarespace/server#1.1.2 bundle /Users/Squid/.npm-global/lib/node_modules/#squarespace/server
> node scripts/bundlejre.js --accept --clear -tz -j 8u131 -o build/distributions/runtimes/jre
Bundling compatible JRE (This may take a while)
> #squarespace/server#1.1.2 cleanupscript /Users/Squid/.npm-global/lib/node_modules/#squarespace/server
> node scripts/execif.js --os=win32 --exists=build node scripts/vetolines.js build/distributions/local-developer/bin/run.bat #!
+ #squarespace/server#1.1.2
updated 1 package in 56.891s
Following that, I clone my site into a folder on my desktop from git and then navigate to the folder in terminal. At this point, I attempt to start the Dev Server, by running the following command(with the "site-name" changed to my site's name:
squarespace-server https://site-name.squarespace.com
My problem begins here, I am met with the following response from the terminal:
-bash: squarespace server: command not found
My mac doesn't recognize the server, even though I found the folder manually on my computer (but I don't know what to do with it).
So far I have attempted a couple troubleshooting methods:
I have a trial site so I tried to use the --auth flag as suggested on the documentation.
I restarted the whole process, so I removed all node and squarespace related files from my system and started again.
After looking online for answers, I installed homebrew to make sure that I am installing node and git correctly to my system.
Finally, I have attempted to change permissions for npm (but I'm not sure that I did this part correctly or not since I don't receive any permission errors).
Also, thank you so much for reading through all this. I just really wanted to make sure you all understood where I was at in this whole process.
I think you can solve this by adding an export path to your profile.
Open the terminal
Enter the following command
touch ~/.bash_profile
(this creates the bash profile)
open ~/.bash_profile
(this opens the bash profile you just created)
Your bash profile will open in a text editor.
Add the following line, then save:
export PATH=~/.npm-global/bin:$PATH
Restart terminal and try using the command again. < This part is important. If you don't restart your terminal it won't recognise the profile.
https://docs.npmjs.com/resolving-eacces-permissions-errors-when-installing-packages-globally
I am using Easyphp-DevServer-17 and PHP7 ,I want to use "memcached" with PHP-7.1 , I downloaded memcached dll files from the following link
php 7 memcahced
I tried adding dll files to ext folder in php 7 but phpinfo file
doesn't reflect it
and i tried following code
$servers = array(array('localserver', 11212));
$memcacheD = new Memcached;
but it throws following error "Fatal error: Uncaught Error: Class 'Memcached' not found"
Please help me on this issue as i am new to php and struggling to load memcached extension
First of all ensure you have the correct version of memcacheD. Most of the versions for Windows out there are memcache, without the D at the end, even the name of the libraries are called memcacheD. It's very misleading but I have added the link to the correct version below. To clarify, memcache and memcacheD are not the same and cannot be interchanged.
Run phpinfo() and make notations of Compiler, Architecture, Thread Safety, you will need this to get the correct version of the DLL.
Download the correct memcacheD version from https://github.com/lifenglsf/php_memcached_dll There are 2 files, the php extension DLL and the lib DLL. You need both.
Save the php extension DLL in your easyPHP folder, in my case was \eds-binaries\php\php713vc14x86x220414190951\ext.
Enable the extension in php.ini, I renamed the DLL so in my case I had to add the line extension=php_memcached.dll
Save libmemcached.dll in C:\windows
Reload Apache to ensure the config is refreshed.
And that's it. Now run phpinfo() again and should show there. If it's not working check Apache error log, it will tell you if the DLL failed to load. If you get the "not a Win32 application" message it means you didn't download the correct DLL.
Remember you also have to have the service running, memcached.exe -d start from cmd should do.
I used the facebook sdk for codeigniter to put its login on my website. I am trying to run the code but I am getting error. I am running it on my localhost providing the localhost url on facebook's site_url and i have tried to follow the instructions it has provided. THe error I am getting is
Fatal error: Class 'Facebook\Facebook' not found in C:\xampp\htdocs\huebind\application\libraries\facebook.php on line 67
The problem must be with not installing with composer. Unfortunately I dont know how to do it either. I simply copied the code on my codeigniter. What difference does it make?
install the composer and put the composer.json file inside the application folder. then from the directory use composer install from command prompt. It will work
I have installed SSH2 as per these instructions. I also checked in PHPInfo, and I can see SSH is working. I.e. It is showing up. However, my code still bombs:
It bombs out with:
Fatal error: require(): Failed opening required 'Net/SSH2.php'
(include_path='.:/usr/lib/php:/usr/local/lib/php.:/usr/lib/php:/usr/local/lib/php/phpseclib')
in SSHConnect.class.inc on line 5
I tried:
locate SSH2.php
And it can't find the files anywhere. So I really have no idea why this is not working? Any ideas?
You installed libssh2 and are trying to use phpseclib. If you want to use phpseclib you can install it via composer or via PEAR. Or you can just go to http://phpseclib.sourceforge.org , download the *.zip and put it where-ever you like, so long as it's in the include_path.