I have been trying to install the dymo web services for the last 2 hours on my Windows 10. I have tried everything. I tried regular installation. I tried custom installation selection dymo web service. I cannot locate the DYMO.DLS.Printing.Host.exe in my computer. I do have DYMO.WebApi.Win.Host.exe on my computer. The app says that the dymo connect service is running on port 41951.
I even have this icon:
But when i click diagnose I do not see this:
All I see is this:
When I go to this
https://127.0.0.1:41951/DYMO/DLS/Printing/Check
url to check my print service
I get:
No HTTP resource was found that matches the request
URI 'https://127.0.0.1:41951/DYMO/DLS/Printing/Check'.
No route data was found for this
request.
a bit late but I just had the same issue. These are the endpoints I have found, according to the latest js framework, below. You could use https://127.0.0.1:41951/DYMO/DLS/Printing/StatusConnected to test connectivity.
WS_CMD_STATUS = "StatusConnected",
WS_CMD_GET_PRINTERS = "GetPrinters",
WS_CMD_OPEN_LABEL = "OpenLabelFile",
WS_CMD_PRINT_LABEL = "PrintLabel",
WS_CMD_PRINT_LABEL2 = "PrintLabel2",
WS_CMD_RENDER_LABEL = "RenderLabel",
WS_CMD_LOAD_IMAGE = "LoadImageAsPngBase64",
WS_CMD_GET_JOB_STATUS = "GetJobStatus";
Hope that helps you or someone else. The documentation is not very good.
Related
Try to troubleshooting QuickBook's Web Connector by following helping URL: Click Me. When I try to Add an application into Web connector getting following error: "QBWC1048: QuickBooks Web Connector could not verify the web application server certificate. QBWC1051: The new application was not added"
QuickBook throws the 1048 error because it is unable to complete a GET request at the AppURL that specified QBFS.qwc file. This is because test.developer.intuit.com restricts GET requests via the SOAP API.
To get around this, include a parameter in the .qwc file, and set it to the same value as your AppURL without the URL path.
For example, if your AppURL is https://mycompany.cs1.force.com/services/Soap/class/myApiClass, then set CertURL to https://mycompany.cs1.force.com.
This is the solution suggested by the QBWC log file, and it worked for me.
Reference URL
I found I had this problem because my software was trying to load the file
http://developer.intuit.com/uploadedFiles/Support/QBWebConnectorSvc.wsdl
which no longer exists. :(
So I got a WSDL from
https://test.developer.intuit.com/QBWC/TroubleshootWebServiceFS/Service.asmx?wsdl
and put it in my Site's root directory, then changed my code to point there, and it worked.
I am following this example
https://code.google.com/p/google-api-python-client/source/browse/samples/service_account/tasks.py
credentials = SignedJwtAssertionCredentials(
'141491975384#developer.gserviceaccount.com',
key,
scope='https://www.googleapis.com/auth/tasks')
http = httplib2.Http()
http = credentials.authorize(http)
service = build("tasks", "v1", http=http)
# List all the tasklists for the account.
lists = service.tasklists().list().execute(http=http)
pprint.pprint(lists)
The issue is , it works sometimes and i get the lists as JSON and after running program few more times i get error
File "/usr/local/lib/python2.7/site-packages/oauth2client/client.py", line 710, in _do_refresh_request
raise AccessTokenRefreshError(error_msg)
oauth2client.client.AccessTokenRefreshError: invalid_grant
I'm interface Google Drive but found the same error. In Issue 160 there is a report of setting the appropriate time on your local computer. Ever since I upgraded to Mac Mavericks I found that the I need to keep updating my system time. I was getting your reported error, set my system time back to current and I eliminated the error.
Are you running this code in a VM or sandboxed environment? If so, it could just be that your VM's clock isn't synchronised to your host machine. See a response to a similar question here.
I suffered the same (frustrating) problem and found that simply restarting my VM (ensuring the time was synchronised to the host machine (or at least set to the local timezone) fixed the problem.
Oauth service is highly dependent on the time, make sure your client uses NTP or another time syncing mechanism.
Test with curl -I https://docs.google.com/ ; date -u
You should see the same Date: (or whithin a few seconds) for this to work
Good day everyone, I have been trying to put my moodle online so pcs from internet can access it, but until now, no luck at all. (Im using moodle 2.3.2 on Windows Server 2008 and IIS 7).
I tried to configure the moodle file config.php, setting the directive $CFG -> wwwroot = "my-public-ip/moodle". Then, when I access to moodel from the server, I can access it by "http://my-public-ip/moodle", when I try to access via localhost, it sends an error which it is OK.
But the funny part comes when I try to access the server from an outside pc. When I type "http://my-public-ip/moodle" it simply cant "see" the configuration I made to the config.php file (it says: This server cna only be accessed via localhost/moodle) it looks like the outside pcs are either ignoring it, or searching for another configuration file. I dont know what the hell is happening, this is very odd.
Any ideas?? tnx!!!
Change the following file:
lib-->setuplib.php
Redirect ($CFG->wwwroot, get_string('wwwrootmismatch', 'error', $CFG->wwwroot), 3);
for
Redirect ($CFG->wwwroot, get_string('wwwrootmismatch', 'error', $CFG->wwwroot), 0);
I realise this is an old question, but it's also worth pointing out you may need to also run the database search and replace script, at:
http://my-public-ip/moodle/admin/tool/replace/index.php
as referenced in Method 2 here.
This is required if you change the name of the site once you have installed it. If you were already using Moodle under "localhost", then there will be a number of references to the old localhost address stored in the database that need to be updated to the new IP-based address.
It might be because the http:// part is missing?
$CFG->wwwroot = "my-public-ip/moodle"
should be
$CFG->wwwroot = "http://my-public-ip/moodle"
I am trying to setup ASP.Net MVC 2 application on Linux environment. I've installed Ubuntu 10.10 on VirtualBox, then installed Mono 2.8 from sources. After that I have installed nginx and configure it as recommended here.
Unfortunately, FastCGI shows me standard error 500 page:
No Application Found
Unable to find a matching application for request:
Host localhost:80
Port 80
Request Path /Default.aspx
Physical Path /var/www/mvc/Default.aspx
My application is located in /var/www/mvc directory. I've tried to create some stub Default.aspx file and place it in root dir of my application, but it didn't help, same error occured.
Thanks.
I've been doing some testing with this as well, using all ubuntu10.10 binaries.
From what I can make from it, either nginx fails to pass the hostname of the mono server fails to receive it over the fastcgi protocol. Anyhow, the tutorial line:
fastcgi-mono-server2 /applications=www.domain1.xyz:/:/var/www/www.domain1.xyz/ /socket=tcp:127.0.0.1:9000
doesn't work. Removing the hostname makes the thing work:
fastcgi-mono-server2 /applications=/:/var/www/www.domain1.xyz/ /socket=tcp:127.0.0.1:9000
but this of course blocks the use of multiple virtual mono hosts.
Since you are running ASP.NET MVC 2 application you should use fastcgi-mono-server4.
Adding following line in /etc/nginx/fastcgi_param resolves the issue for me. It also allows to use multiple virtual hosts.
fastcgi_param HTTP_HOST $host;
Does your application work with xsp (xsp4 if you are using .net 4.0)? You'll want to make sure that is working before you try configuring the connection to another web server.
Does nginx know where to find mono? You most likely have a parallel install and it won't be in the default paths.
I use apache, but you may still find some of the instructions on my blog useful:
http://tqcblog.com/2010/04/02/ubuntu-subversion-teamcity-mono-2-6-and-asp-net-mvc/
I had this problem just now, I too had been following the document on the mono site:
I was trying to start the fastcgi-mono-server as it suggested:
sudo fastcgi-mono-server4 /applications=www.domain1.xyz:/:/var/www/www.domain1.xyz/ /socket=tcp:127.0.0.1:9000 &
However when I did it like that I got the same problem as you. I changed it to this:
sudo fastcgi-mono-server4 /applications=/:/var/www/www.domain1.xyz/ /socket=tcp:127.0.0.1:9000 &
And it worked ( I had to type in www.domain1.xyz/Home/Index to see my MVC page, not worked out how to stop it looking for www.domain1.xyz/default.aspx yet XD ).
You need to make sure the domain set in your site config matches the domain passed to the fastcgi server. So for example if your default site (/etc/nginx/sites-enabled/default) has the following config:
server {
...
server_name www.domain1.xyz;
...
}
You would need to pass that domain into the fastcgi server:
sudo fastcgi-mono-server4 /applications=www.domain1.xyz:/:/var/www/www.domain1.xyz/ ...
Then when you access the site it will obviously need to be with that domain you set.
I need to deploy my COM dll as a COM+ application. I used to do that from Component Services manager (dcomcnfg.exe). But my requirement is to deploy it from command-line. Is there a command to do that?
Update: And how to uninstall the same?
Thanks.
Here are a couple of scripts that dump a COM+ application's settings to an XML file, as well as installs applications from and XML file. It provided me a good framework for doing something similar a while back. It contains example code of how to create and remove COM+ applications using the COM+ administration API.
This vbscript snippet creates an application and installs a component:
Dim catalog
Dim applications
Dim application
Set catalog = CreateObject("COMAdmin.COMAdminCatalog")
Set applications = catalog.GetCollection("Applications")
Call applications.Populate
Set application = applications.Add()
' ID is an arbitrary GUID, that you can create using uuidgen
application.Value("ID") = "{da2d72e3-f402-4f98-a415-66d21dafc0a9}"
application.Value("Name") = "SampleApp"
application.Value("Activation") = 0' COMAdmin.COMAdminActivationOptions.COMAdminActivationLocal
application.Value("ApplicationAccessChecksEnabled") = 0 'COMAdmin.COMAdminAccessChecksLevelOptions.COMAdminAccessChecksApplicationComponentLevel
application.Value("Description") = "Sample Application"
'application.Value("Identity") = "machine\administrator"
'application.Value("Password") = "YourPassword"
application.Value("RunForever") = True
Call applications.SaveChanges
catalog.InstallComponent "SampleApp", "C:\Documents and Settings\me\My Documents\Test\MyTestProj.dll", "", ""
Set application = Nothing
Set applications = Nothing
Set catalog = Nothing
This is running on Windows XP -- other OS's may have different behavior. And it does seem to be pretty temperamental. If it doesn't work the errors are really vague and unhelpful.
To delete I think you will have to iterate over the the components in the application and remove from the list as per this example. I think a similar approach would be required to remove the entire application.
References
See Configurating COM+ for a good easy to understand article (but is not in script). MSDN has a good reference on Automating COM+ Administration and also the complete COM+ Administration Reference.