In bash I'm looking for a way to update a line in a file:
/dev/vg/home /home ext4 defaults,noatime,nofail,nodev 0 2
if line contains '/home ext4' replace 'nodev', with 'nodev,nosuid' :
/dev/vg/home /home ext4 defaults,noatime,nofail,nodev,nosuid 0 2
if line contains '/home ext4' replace 'nodev', with 'nodev,nosuid' :
sed '/\/home.*ext4/s/nodev/nodev,nosuid/'
If a line matches /home<anything>ext4 then substitute 'nodev', with 'nodev,nosuid'.
The following is untested.
The sed command gives the substitute command on any line that contains /home ext4.
sed -i '/\/home ext4/s/nodev/nodev,nosuid/' /path/to/file
Could you please try following.
sed '/\/home ext4/s/nodev/nodev,nosuid/g' Input_file
OR choosing a different separator as # rather than default / to avoid confusions, since your keyword /home ext4 has a / in it which we need to escape to let sed know that it is not a separator and its a value of string, so in spite of escaping things we can use a different separator itself.
sed '\#/home ext4#s/nodev/&,nosuid/' Input_file
If you see above solution carefully we need not to escape / since sed's separator is # here, btw you could choose it as per your convenience too. Thanks to #potong sir for guiding on right regex for this code.
Related
Is there a way in (Gnu) sed to replace all characters in a matching part of a string? For example I might have a list of file paths with several (arbitrary number of) paths in each line, e.g.:
/a/b/c/d/e /f/g/XXX/h/i /j/k/l/m
/n/o/p /q/r/s/t/u /v/x/x/y
/z/XXX/a/b /c/d/e/f
I would like to replace all the slashes in paths containing XXX keping all the others untouched, e.g.:
/a/b/c/d/e #f#g#XXX#h#i /j/k/l/m
/n/o/p /q/r/s/t/u /v/x/x/y
#z#XXX#a#b /c/d/e/f
Unfortunately I cannot come up with a solution. Maybe it's even impossible with sed. But I'm curious if somebody find a way to solve the problem.
We can replace any / preceding XXX with no intervening spaces like this:
# Using extended regex syntax
s!/([^ ]*XXX)!#\1!
It's a very similar substitution for those that follow XXX.
Putting them together in a loop makes this program:
#!/bin/sed -rf
:loop
s!/([^ ]*XXX)!#\1!
s!(XXX[^ ]*)/!\1#!
tloop
Output:
/a/b/c/d/e #f#g#XXX#h#i /j/k/l/m
/n/o/p /q/r/s/t/u /v/x/x/y
#z#XXX#a#b /c/d/e/f
That said, it might be simpler to use a pipeline, to break the file paths into individual lines and then reassemble them after the substitution:
sed -e 's/ *$//;s/ */&\n/g' \
| sed -e '/XXX/y,/,#,' \
| sed -e ':a;/ $/{N;s/\n//;ba}'
This question already has answers here:
Using different delimiters in sed commands and range addresses
(3 answers)
Closed 1 year ago.
I have a Visual Studio project, which is developed locally. Code files have to be deployed to a remote server. The only problem is the URLs they contain, which are hard-coded.
The project contains URLs such as ?page=one. For the link to be valid on the server, it must be /page/one .
I've decided to replace all URLs in my code files with sed before deployment, but I'm stuck on slashes.
I know this is not a pretty solution, but it's simple and would save me a lot of time. The total number of strings I have to replace is fewer than 10. A total number of files which have to be checked is ~30.
An example describing my situation is below:
The command I'm using:
sed -f replace.txt < a.txt > b.txt
replace.txt which contains all the strings:
s/?page=one&/pageone/g
s/?page=two&/pagetwo/g
s/?page=three&/pagethree/g
a.txt:
?page=one&
?page=two&
?page=three&
Content of b.txt after I run my sed command:
pageone
pagetwo
pagethree
What I want b.txt to contain:
/page/one
/page/two
/page/three
The easiest way would be to use a different delimiter in your search/replace lines, e.g.:
s:?page=one&:pageone:g
You can use any character as a delimiter that's not part of either string. Or, you could escape it with a backslash:
s/\//foo/
Which would replace / with foo. You'd want to use the escaped backslash in cases where you don't know what characters might occur in the replacement strings (if they are shell variables, for example).
The s command can use any character as a delimiter; whatever character comes after the s is used. I was brought up to use a #. Like so:
s#?page=one&#/page/one#g
A very useful but lesser-known fact about sed is that the familiar s/foo/bar/ command can use any punctuation, not only slashes. A common alternative is s#foo#bar#, from which it becomes obvious how to solve your problem.
add \ before special characters:
s/\?page=one&/page\/one\//g
etc.
In a system I am developing, the string to be replaced by sed is input text from a user which is stored in a variable and passed to sed.
As noted earlier on this post, if the string contained within the sed command block contains the actual delimiter used by sed - then sed terminates on syntax error. Consider the following example:
This works:
$ VALUE=12345
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
MyVar=12345
This breaks:
$ VALUE=12345/6
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
sed: -e expression #1, char 21: unknown option to `s'
Replacing the default delimiter is not a robust solution in my case as I did not want to limit the user from entering specific characters used by sed as the delimiter (e.g. "/").
However, escaping any occurrences of the delimiter in the input string would solve the problem.
Consider the below solution of systematically escaping the delimiter character in the input string before having it parsed by sed.
Such escaping can be implemented as a replacement using sed itself, this replacement is safe even if the input string contains the delimiter - this is since the input string is not part of the sed command block:
$ VALUE=$(echo ${VALUE} | sed -e "s#/#\\\/#g")
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
MyVar=12345/6
I have converted this to a function to be used by various scripts:
escapeForwardSlashes() {
# Validate parameters
if [ -z "$1" ]
then
echo -e "Error - no parameter specified!"
return 1
fi
# Perform replacement
echo ${1} | sed -e "s#/#\\\/#g"
return 0
}
this line should work for your 3 examples:
sed -r 's#\?(page)=([^&]*)&#/\1/\2#g' a.txt
I used -r to save some escaping .
the line should be generic for your one, two three case. you don't have to do the sub 3 times
test with your example (a.txt):
kent$ echo "?page=one&
?page=two&
?page=three&"|sed -r 's#\?(page)=([^&]*)&#/\1/\2#g'
/page/one
/page/two
/page/three
replace.txt should be
s/?page=/\/page\//g
s/&//g
please see this article
http://netjunky.net/sed-replace-path-with-slash-separators/
Just using | instead of /
Great answer from Anonymous. \ solved my problem when I tried to escape quotes in HTML strings.
So if you use sed to return some HTML templates (on a server), use double backslash instead of single:
var htmlTemplate = "<div style=\\"color:green;\\"></div>";
A simplier alternative is using AWK as on this answer:
awk '$0="prefix"$0' file > new_file
You may use an alternative regex delimiter as a search pattern by backs lashing it:
sed '\,{some_path},d'
For the s command:
sed 's,{some_path},{other_path},'
I'm on Linux command line and I have file with
127.0.0.1
128.0.0.0
121.121.33.111
I want
127.0.0.1:80
128.0.0.0:80
121.121.33.111:80
I remember my colleagues were using sed for that, but after reading sed manual still not clear how to do it on command line?
You could try using something like:
sed -n 's/$/:80/' ips.txt > new-ips.txt
Provided that your file format is just as you have described in your question.
The s/// substitution command matches (finds) the end of each line in your file (using the $ character) and then appends (replaces) the :80 to the end of each line. The ips.txt file is your input file... and new-ips.txt is your newly-created file (the final result of your changes.)
Also, if you have a list of IP numbers that happen to have port numbers attached already, (as noted by Vlad and as given by aragaer,) you could try using something like:
sed '/:[0-9]*$/ ! s/$/:80/' ips.txt > new-ips.txt
So, for example, if your input file looked something like this (note the :80):
127.0.0.1
128.0.0.0:80
121.121.33.111
The final result would look something like this:
127.0.0.1:80
128.0.0.0:80
121.121.33.111:80
Concise version of the sed command:
sed -i s/$/:80/ file.txt
Explanation:
sed stream editor
-i in-place (edit file in place)
s substitution command
/replacement_from_reg_exp/replacement_to_text/ statement
$ matches the end of line (replacement_from_reg_exp)
:80 text you want to add at the end of every line (replacement_to_text)
file.txt the file name
How can this be achieved without modifying the original file?
If you want to leave the original file unchanged and have the results in another file, then give up -i option and add the redirection (>) to another file:
sed s/$/:80/ file.txt > another_file.txt
sed 's/.*/&:80/' abcd.txt >abcde.txt
If you'd like to add text at the end of each line in-place (in the same file), you can use -i parameter, for example:
sed -i'.bak' 's/$/:80/' foo.txt
However -i option is non-standard Unix extension and may not be available on all operating systems.
So you can consider using ex (which is equivalent to vi -e/vim -e):
ex +"%s/$/:80/g" -cwq foo.txt
which will add :80 to each line, but sometimes it can append it to blank lines.
So better method is to check if the line actually contain any number, and then append it, for example:
ex +"g/[0-9]/s/$/:80/g" -cwq foo.txt
If the file has more complex format, consider using proper regex, instead of [0-9].
You can also achieve this using the backreference technique
sed -i.bak 's/\(.*\)/\1:80/' foo.txt
You can also use with awk like this
awk '{print $0":80"}' foo.txt > tmp && mv tmp foo.txt
Using a text editor, check for ^M (control-M, or carriage return) at the end of each line. You will need to remove them first, then append the additional text at the end of the line.
sed -i 's|^M||g' ips.txt
sed -i 's|$|:80|g' ips.txt
sed -i 's/$/,/g' foo.txt
I do this quite often to add a comma to the end of an output so I can just easily copy and paste it into a Python(or your fav lang) array
I am trying to use unix sed command to find line numbers that match a particular regular expression. The pattern of my file is below
A<20 spaces>
<something>
<something>
..
..
A<20 spaces>
<soemthing>
<something>
I need all the line numbers of A<20 spaces>
I used sed -n '/A[ ]{20}/'= <file_name> but it does not work. If I manually type in twenty spaces it does work.
Can some one please tweak the above command to make it work.
The braces in the expression need to be escaped with backslashes:
% sed -n '/A[ ]\{20\}/=' test.txt
1
6
An alternative would be to use -E to interpret regular expressions as extended (modern) regular expressions:
% sed -nE '/A[ ]{20}/=' test.txt
1
6
Or potentially use grep instead, which takes fewer characters to specify the same search:
% grep -n 'A[ ]\{20\}' test.txt
The correct syntax would be /A \{20\}/ (and I'm failing to understand where you got your syntax from).
edit: repeat a space, not an A. not my day
use the -E or the -r switch for extended regexp
just to be sur of the content request is answered because it literraly mean "20 spaces" and not Twenty " " char that everyone understand due to the sed line sample failing (i guess this the good one so other reply are fine in this case)
sed -n "/<20 spaces>/ =" file_name
how to remove comment lines (as # bal bla ) and empty lines (lines without charecters) from file with one sed command?
THX
lidia
If you're worried about starting two sed processes in a pipeline for performance reasons, you probably shouldn't be, it's still very efficient. But based on your comment that you want to do in-place editing, you can still do that with distinct commands (sed commands rather than invocations of sed itself).
You can either use multiple -e arguments or separate commands with a semicolon, something like (just one of these, not both):
sed -i 's/#.*$//' -e '/^$/d' fileName
sed -i 's/#.*$//;/^$/d' fileName
The following transcript shows this in action:
pax> printf 'Line # with a comment\n\n# Line with only a comment\n' >file
pax> cat file
Line # with a comment
# Line with only a comment
pax> cp file filex ; sed -i 's/#.*$//;/^$/d' filex ; cat filex
Line
pax> cp file filex ; sed -i -e 's/#.*$//' -e '/^$/d' filex ; cat filex
Line
Note how the file is modified in-place even with two -e options. You can see that both commands are executed on each line. The line with a comment first has the comment removed then all is removed because it's empty.
In addition, the original empty line is also removed.
#paxdiablo has a good answer but it can be improved.
(1) The '/^$/d' clause only matches 100% blank lines.
If you want to also match lines that are entirely whitespace (spaces, tabs etc.) use this instead:
'/^\s*$/d'
(2) The 's/#.*$//' clause only matches lines that start with the # character in column 0.
If you want to also match lines that have only whitespace before the first # use this instead:
'/^\s*#.*$/d'
The above criteria may not be universal (e.g. within a HEREDOC block, or in a Python multi-line string the different approaches could be significant), but in many cases the conventional definition of "blank" lines include whitespace-only, and "comment" lines include whitespace-then-#.
(3) Lastly, on OSX at least, the #paxdiablo solution in which the first clause turns comment lines into blank lines, and the second clause strips blank lines (including what were originally comments) doesn't work. It seems to be more portable to make both clauses /d delete actions as I've done.
The revised command incorporating the above is:
sed -e '/^\s*#.*$/d' -e '/^\s*$/d' inputFile
This tiny jewel removes all # comments, no matter where they begin in a line (see caution below):
sed -e 's/\s*#.*$//'
Example:
text="
this is a # test
#this is a test
#this is a #test
this is # another #test
"
$echo "$text" | sed -e 's/\s*#.*$//'
this is a
this is
Next this removes any resulting blank lines:
$echo "$text" | sed -e 's/\s*#.*$//' | sed -e '/^\s*$/d'
Caution: Depending on the syntax and/or interpretation of the lines your processing, this might not be an appropriate solution, as it just stupidly removes end of lines, even if the '#' is part of your data or code. However, for use cases where you'll never use a hash except for as an end of line comment then it works fine. So just as with all coding, context must be taken into consideration.
Alternative variant, using grep:
cat file.txt | grep -Ev '(#.*$)|(^$)'
you can use awk
awk 'NF{gsub(/^[ \t]*#/,"");print}' file
First example(paxdiablo) is very good except its not change file, just output result. If you want to change it inline:
sudo sed -i 's/#.*$//;/^$/d' inputFile
On (one of) my linux boxes, sed understands extended regular expressions with the -r option, so:
sed -r '/(^\s*#)|(^\s*$)/d' squid.conf.installed
is very useful for showing all non-blank, non comment lines.
The regex matches either start of line followed by zero or more spaces or tabs followed by either a hash or end of line, and deletes those matching lines from the input.