I'm on OSX and running Version 1.42.0 of Visual Studio Code. I have noticed that when I single click a word it will highlight. But if I copy CMD + c and then paste CMD+v, the full line will be in the clipboard. This causes problems from time to time, when the screen has given me every indication that I have only selected a single word. Is there some setting that I can set that will make the default behavior to select a word on a single quote and never ghost select a full line?
What it looks like when I single click a word:
And what it looks like after I've copied and pasted:
After filing an issue, it turns out that this behavior is by design.
The word the cursor is on (from a single click) is highlighted along with every occurrence of that word. The word is not selected (that would be a deeper blue).
By default copying without a selection copies the current line.
This in my opinion is an Accessibility issue, as there are strong visual clues that a word is selected. I have found that the behavior can be made more intuitive if you set these to settings.
// Controls whether copying without a selection copies the current line.
"editor.emptySelectionClipboard": false,
// Controls whether the editor should highlight semantic symbol occurrences.
"editor.occurrencesHighlight": false
With these two settings the word the cursor is on will not be highlighted (nor any other occurrences of that word). And if you do happen to copy, with an empty selection, the editor will behave similar to how other applications behave and not copy the current line.
Related
I'm using visual studio code and run into a weird problem. I'm not sure how I got here - I could have accidently pressed a shortcut unknowingly.
I'm trying to select a phrase, link or anything that crosses multiple lines (whether the lines are true lines or due to word wrap). When I select multiple lines, it doesn't automatically select the text at the start and end between the two points. Rather, it just selects the length of text for that line and repeats it in the subsequent lines. See the image below to understand.
Image of issue
As you can see, I am trying to select the words from "the" to the end of "sub". Instead of selecting all the words between the two, it selects the text "the instru" and selects every line with the same amount of characters/length.
In order to show what I am expecting, I have pasted the text into Notepad and done the same thing.
What I am expecting
As you can see, all the words between "the" and "sub" are selected.
If anyone has any idea about how to fix this, I would be greatly appreciative.
Below is a copy of the text if the images don't display.
Follow the instructions below for a click guide to retire and/or add 'School'.
Best practice if there is a change in 'School' structure would be to 'retire' any existing school setup that is no longer required and add the new sub school information. The reason why we don't just edit existing school names (typically) is due to leaving historical data intact.
Try using ctrl+shift+P and typing "Toggle Column Selection Mode"
I've been transitioning to using VS Code for my python projects after previously working with the full Visual Studio, and some of the key bindings/features I'm used to in Visual Studio I can't find the equivalent for in VS Code. I'm not sure if the bindings are different or if the feature doesn't exist.
One feature in particular that I can't figure out is if it is possible to do multi-line select past line endings. In Visual Studio, using Alt + Click + Drag, lets you create a multi-line cursor or box selection, that can extend past line ends, implicitly adding spaces as needed so that the right-most side of the box stays uniform. In VS Code, if you drag the selection past the end of a line, the selection box won't go past the end of the line, even if other lines in the selection extend past it. In Visual Studio, this feature even goes further, as you could Alt + Click + Drag even in areas with no characters as all, creating a multiline cursor or box selection to the right of all existing line ends.
This isn't an essential feature, but it's very handy in making code easy to read. For example, when assigning several dictionary entries all at once, with varying key lengths. Is it possible to do something like this in VS Code?
Edit: The feature I'm looking for is virtual spaces (thank you Mark for providing the feature name), which seems to be an outstanding feature request in VS Code.
The short answer is no, vscode does not have a box select, past line ends, built-in. VS Code does not have the concept of virtual spaces which would be necessary to make this work yet.
Below is the issue, lots of comments, not that many upvotes. Upvote it.
https://github.com/microsoft/vscode/issues/5402
In VSCode, when you place cursor inside a symbol (variables, functions, etc), all occurrence of the same symbol will be highlighted.
This feature is somewhat useful but annoying as well. Even I can make it less obtrusive by customizing the color theme in settings.json, it will suppress the selection highlighting when you select a variable by double clicking it with mouse cursor.
I've learned that I can completely disable this feature by adding "editor.occurrencesHighlight":false in settings.json, but this feature is still useful because it can label occurrences of a symbol with different color, to represent read/write status of each occurrence.
So my question is: is there any way to disable the automatic semantic matching feature, and only enable it manually with keyboard shortcuts or commands ?
If you only need textual matches, you can select some text use the Select all occurrences of find match command. This will select every occurrence of the selected text in the current document (and also create a cursor at it)
For symbol based information, try using the Find all references or Peek references commands. The flow is different but it gives the same information.
Alternatively, use an extension like this one to create a keyboard shortcut that toggles editor.occurrencesHighlight
I'm trying to use the multi cursor functionality of vscode on a large(ish) file.
the file is too large to select every line individually with ctrl-alt-up or down. In sublime-text I would select everything and push ctrl-shift-l. Is there a similar thing in vscode. I've tried using a regex search for ^, but that gives me an error stating "Expression matches everything".
The command Selection / Add Cursors to Line Ends altshifti will put a cursor on every line in the current selection. (For mac use optshifti)
Tip: You can pull up the keyboard shortcut reference sheet with ctrlk,ctrls (as in, those two keyboard combos in sequence).
(For mac use cmdk,cmds)
Hold Alt+Shift and select the block. Then press End or Right button.
You get selected individual lines.
I use version VSCode 1.5.3 in Windows.
Hold Alt+Shift+i
Hold Home (fn+-> Mac) for right-most or End for left most(fn+<- Mac)
This feature is actually called split selection into lines in many editors.
Sublime Text uses the default keybinding, CTRLSHIFT L
VSCode uses ALTSHIFTI
For Atom you actually need to edit your keymap to something like this
'.platform-win32 .editor, .platform-linux .editor':
'ctrl-shift-L': 'editor:split-selections-into-lines'
Real Lines vs Display Lines
First we have to understand the difference between Real Lines and Display Lines to completely understand the answer of the question.
When Word Wrap is enabled, each line of text that exceeds the width of the window will display as wrapped. As a result, a single line in the file may be represented by multiple lines on the display.
The easiest way to tell the difference between Real Lines and Display Lines is by looking at the line number in the left margin of the text editor. Lines that begin with a number correspond to the real lines, which may span one or more display lines. Each time a line is wrapped to fit inside the window, it begins without a line number.
Cursor At the Beginning of each Display Lines:
Cursor At the Beginning of each Real Lines:
Answer to the Question
Now that we know the difference between Display Lines and Real Lines, we can now properly answer the actual question.
Hold AltShift and select the text block.
Press Home to put cursor on the beginning of every Display Line.
Press End to put cursor on the end of every Display Line.
Press HomeHome (Home twice) to put cursor on the beginning of every Real Line.
Press EndEnd (End twice) to put cursor on the end of every Real Line.
Please understand that AltShiftI put cursor on the end of every Real Line.
Install the extension Sublime Commands.
[Sublime Commands] Adds commands from Sublime Text to VS Code: Transpose, Expand Selection to Line, Split into Lines, Join Lines.
(Don't forget to add the keybinding(s) from the extensions details page to your keybindings.json)
Doesn't VS Code already have a "split into lines" command?
Yes, yes it does. However it differs from the one in Sublime.
In VS Code, when you split into lines your selection gets deselected and a cursor appears at the end of each line that was selected (except for the last line where the cursor appears at the end of the selection).
In Sublime, when you split into lines a cursor appears at the end of each line (with the same exception as in VS Code) and the selection is divided on each line and "given" to the same line.
I have the same problem, i'm used to Alt + drag to do 'box selections' in visual studio but it does'n work in code.
It seems to be impossible for now to do it differently than by selecting every single line.
However plugins should be supported soon so we will likely see a plugin for this if not implemented directly by microsoft.
From visual studio uservoice forums:
We plan to offer plugin support for Visual Studio Code. Thank you for your interests and look for more details in our blog in the coming weeks. http://blogs.msdn.com/b/vscode.
For the preview we are looking for exactly this type of feedback. Keep it coming.
Sean McBreen – VS Code Team Member
Good file comparison tools were already discussed to the pain, but my problem is more exotic. Is there any visual text comparison tool (like WinMerge) that would allow me easily do visual comparison on two sections within the same file?
I have multiple configurations within vcproj file and need to maintain them. It is a pain to do this manually -- splitting windows, scrolling character-by character. On top of that xml is very verbose and takes lots of screen real-estate. I cannot believe there is no tool to do automatic file section comparison, since this sounds like a very common problem.
Please, do not offer me to use property pages, I do not want more complexity, I want less. Splitting manually into files and then comparing them is also too medieval (I am doing this now anyways).
I use Beyond Compare (not free, but I think a shareware version is available). You can select the same file for left and right sides, then right-click the beginning of your section on each side and select "Align Manually". This would allow you to compare two sections of the same file relatively easily.
Overall, I highly recommend the product. I haven't tried version 3, which is what they currently have on their Web site, but version 2 is a fabulous tool. A+
Emacs Ediff.
I use UltraEdit for most of my text editing and they have a product called UltraCompare that does a visual compare.
Update by Mofi
UltraCompare Professional supports also a comparison of text snippets in addition to entire files.
After starting UltraCompare, select Text Compare in menu Mode if not already selected. Select in text editor the first text block which should be compared, press Ctrl+C, switch back to UC and paste with Ctrl+V the block into left text area pane. Switch again to text editor, select the other block in same file, press Ctrl+C, switch back to UC, click into right pane and paste the block with Ctrl+V. The two blocks are immediately compared and the differences are displayed.
Such a text snippet comparison for two blocks in same file can be started also directly from within UltraEdit. Select the first block in file, press Ctrl+C, Ctrl+N, Ctrl+V and Ctrl+A to copy, paste and reselect this block in a new file. Select the second block in file. Execute command Compare from menu File in UltraEdit with option Compare selected text automatically being enabled and click on button Compare. UC Professional is started with just the 2 selected blocks for comparison.
You can use Meld to do this
Open up meld without specifying file names
Meld with prompt which type of comparison you want. Choose file comparison
Meld will present the the icon to select the file names. Below that it will prompt for a Blank comparison. Choose that.
In the file comparison window, paste the sections of the file you want to compare.