I created a new spreadsheet with LibreOffice 6.4 and noticed that formulas do not execute (and recalculate). So, when I write =1+1 or =A1+A2 (with values in those cells), nothing happens. Likewise, when I copy and paste formulas from older spreadsheets, nothing happens either.
I have found some advice in various forums that point to Tools->Options and LibreOffice->Preferences (since I have a Mac). One source tells me that auto-recalculation is disabled for reasons of backward compatibility with Excel (what I do not understand as I just created a new file).
I have enabled 'Always recalculate' for both options in LibreOffice->Preferences (Option LibreCalc->Formula):
Nothing in the 'Calculate' Option tab seems to indicate anything in this direction.
This seems not to change anything. What am I missing?
How can I make sure that everything always recalculates and always executes all my formulas?
Thanks!
Try this:
Select your range ; hit CTRL+H ; Found = ^. ; Replace = & ; check "regular expressions" box below ; "replace all" button;
It works better if you create a new empty spreadsheet and then paste your data.
What worked today under Windows only: Re-create the formula in a new column. After it works correctly, Copy or Move the new cell into the old position, overwriting everything in the cell that was not calculating.
Related
I'm using visual studio code and run into a weird problem. I'm not sure how I got here - I could have accidently pressed a shortcut unknowingly.
I'm trying to select a phrase, link or anything that crosses multiple lines (whether the lines are true lines or due to word wrap). When I select multiple lines, it doesn't automatically select the text at the start and end between the two points. Rather, it just selects the length of text for that line and repeats it in the subsequent lines. See the image below to understand.
Image of issue
As you can see, I am trying to select the words from "the" to the end of "sub". Instead of selecting all the words between the two, it selects the text "the instru" and selects every line with the same amount of characters/length.
In order to show what I am expecting, I have pasted the text into Notepad and done the same thing.
What I am expecting
As you can see, all the words between "the" and "sub" are selected.
If anyone has any idea about how to fix this, I would be greatly appreciative.
Below is a copy of the text if the images don't display.
Follow the instructions below for a click guide to retire and/or add 'School'.
Best practice if there is a change in 'School' structure would be to 'retire' any existing school setup that is no longer required and add the new sub school information. The reason why we don't just edit existing school names (typically) is due to leaving historical data intact.
Try using ctrl+shift+P and typing "Toggle Column Selection Mode"
So I am having a problem. This is what I can create on one of my laptop:
On another, when I created something that has {TC} in it, the whole field code disappeared.
For the example above, if on the other computer, both are running Office 2010,
I can input the code to create the table of content from:
{TOC \f \h \z \f 1\t "Heading 1,1,Heading 2,2,Heading 3,3,Title,1}
to
{TC}
The moment I type in TC, the whole {} disappears.
Other field codes work just fine, except for {TC}. So my question is how do I get {TC} to show on my other laptop?
Thank you for your time.
Apparently, I found my answer.
When I searched google for my answer, most sites give this as a solution:
For Word 2010, go to File->Options->Advanced
Under Show document contents: Select "Show field code instead of their values"
This is the equivalent of pressing Alt+F9, which DID NOT solve my problem.
Apparently, the solution to get {TC} to show in your document is in:
go to File->Options->Display
and check to always show HIDDEN TEXT.
I hope this helps someone in the future.
Yeah, the disappearing TC code is annoying at first -- seems like it's broken. Other codes work, but why does that disappear, even if entering manually? Word instantly sets TC code to Hidden, even the field code itself.
To temporarily toggle this visible without permanently changing your display to show Hidden Text, you can use the normal Ctrl-Shift-8, which toggles display of spaces, paragraph marks, tabs, and Hidden Text, on and off. This is a good keyboard shortcut to have in your standard back of tricks anyway. It is frequent in Word that you need to toggle paragraph marks on and off, because paragraph formatting is attached to the Paragraph mark, and when they're hidden, it can be tricky to fix various formatting issues.
The original post was a few years ago, but I fear things have gotten worse since then, not better. I am using Word 365 v2201, which should be up to date. The other day, I wasted hours on trying to resolve this issue with TC field codes.
First I tried entering them using Insert > Quick Parts > Field. Word creates what looks like a field code, but it behaves as normal text. Messing around with the various controls to toggle field display and hidden text etc etc, has absolutely no effect. It is basically a faux field. And of course, it is completely ignored when compiling the TOC.
Next, I tried entering it manually, by using Ctrl + F9 to either create a blank field or convert some existing text into a field. Same result as above.
As with the original post, this seems to afflict only the TC field code. Other codes work fine, including TOC. And if I create a TOC field, then edit the code to TC, it immediately loses its properties as a field. If I then put the O back in, it immediately behaves as a field once again. Unlike in the original post, adjusting the settings for field display and/or hidden text, have no impact.
In the end, the only solution was to create the field using Alt + Shift + o to open the Mark Table of Contents Entry dialog box. And finally, this works!
 I'm now puzzled by the behavior of SE about the auto-copy feature.
First,when I double click on any word,the word will be copied to the clipboard,however I never found any other editor which behaves like this.This is actually annoying exspecially when you want to paste one word to another word by double click the other word to select it.
 Second,When I select a block by moving the mouse ,the selection area is automatically copied to the clipboard,which makes me quite depressed because I select the block just to highlight it but not to copy it.
 As you see,these two features both concern about the clipboard in SE.I actually don't think they are good designs.Or is there any way to close these features,I will be very grateful to get any helpfull advice here.Here is my e-mail[[hustwsh2011#gmail.com][1]] if you would be so nice to send the answer to my mailbox.It's also welcomed to post your answer here so as to help others who are also puzzling by this problem.
_command paste_replace_whole_word_fixed(){
// I assign this to A-DEL INS
delete_full_word();
paste();
}
Do you know any easy way to find out what is the length of the current selection in Eclipse?
i.e. I select a line fragment and would like to know how many characters are there?
Usually, I count them manually, but that's stupid. When being desperate, I move to the start, check the column number, move to the end, check the column number, subtract, think a minute if I should add 1 or not... and my selection is lost.
On Windows, Notepad++ is a good solution. Open a new tab, copy and paste in there and the length of the document listed at the bottom of the window is the number of characters you have.
Easy way? Copy the text and paste it to a counting script, like this site:
http://charcount.com/
(Warning: the site's background may hurt your eyes.)
Eclipse does support a Selection object, if you're into its API:
http://www.eclipse.org/articles/Article-WorkbenchSelections/article.html#example
Good file comparison tools were already discussed to the pain, but my problem is more exotic. Is there any visual text comparison tool (like WinMerge) that would allow me easily do visual comparison on two sections within the same file?
I have multiple configurations within vcproj file and need to maintain them. It is a pain to do this manually -- splitting windows, scrolling character-by character. On top of that xml is very verbose and takes lots of screen real-estate. I cannot believe there is no tool to do automatic file section comparison, since this sounds like a very common problem.
Please, do not offer me to use property pages, I do not want more complexity, I want less. Splitting manually into files and then comparing them is also too medieval (I am doing this now anyways).
I use Beyond Compare (not free, but I think a shareware version is available). You can select the same file for left and right sides, then right-click the beginning of your section on each side and select "Align Manually". This would allow you to compare two sections of the same file relatively easily.
Overall, I highly recommend the product. I haven't tried version 3, which is what they currently have on their Web site, but version 2 is a fabulous tool. A+
Emacs Ediff.
I use UltraEdit for most of my text editing and they have a product called UltraCompare that does a visual compare.
Update by Mofi
UltraCompare Professional supports also a comparison of text snippets in addition to entire files.
After starting UltraCompare, select Text Compare in menu Mode if not already selected. Select in text editor the first text block which should be compared, press Ctrl+C, switch back to UC and paste with Ctrl+V the block into left text area pane. Switch again to text editor, select the other block in same file, press Ctrl+C, switch back to UC, click into right pane and paste the block with Ctrl+V. The two blocks are immediately compared and the differences are displayed.
Such a text snippet comparison for two blocks in same file can be started also directly from within UltraEdit. Select the first block in file, press Ctrl+C, Ctrl+N, Ctrl+V and Ctrl+A to copy, paste and reselect this block in a new file. Select the second block in file. Execute command Compare from menu File in UltraEdit with option Compare selected text automatically being enabled and click on button Compare. UC Professional is started with just the 2 selected blocks for comparison.
You can use Meld to do this
Open up meld without specifying file names
Meld with prompt which type of comparison you want. Choose file comparison
Meld will present the the icon to select the file names. Below that it will prompt for a Blank comparison. Choose that.
In the file comparison window, paste the sections of the file you want to compare.