I am looking for a way to set in Azure DevOps .yaml file dynamic demand name.
Right now we have a few self-hosted build agents that are selected by Azure DevOps services randomly but sometimes we need to choose one agent to investigate why it is not working(or for other rare event). One way is to switch off all other agents and operate on this one desired(it affects our whole CI/CD). Second way is adding temporary pipeline and moving desired agent to next agent pool(it costs time).
I think best solution would be possibility to dynamically set demands. For example I can have in variable groups these:
"DemandName" = "IsBuildAgent"
"DemandValue" = "Yes"
Each agent would have this environment variable set ant it would always allow each agent to run pipeline, but if I would set before running pipeline below variables.
"DemandName" = "AgentNumber"
"DemandValue" = "BuildAgentNr6"
It would override library variables and only one agent would be able to run this pipeline.
pool:
name: MyBuildAgents
demands: $(DemandName) -equals $(DemandValue)
DemandValue is correctly evaluated but DemandName cannot be set right now.
Is it possible to achieve in slightly changed way? Maybe should I change syntax? Or maybe should I propose this as new feature?
Is it possible to achieve in slightly changed way? Maybe should I change syntax? Or maybe should I propose this as new feature?
Your syntax is correct.
I am afraid there is no such out of box or slightly changed way to achieve it.
Just like you test, DemandName cannot be set right. That because the left side of the equation is treated as a string instead of a value according to the grammatical rules. This will cause Azure devops to find the demand name as a string $(DemandName) instead of the value of $(DemandName) and then looking for the demand name based on the value.
Hope this helps.
Could you use expressions for this? It would require you to have a code block for every possible demands though.
pool:
name: MyBuildAgents
${{ if eq(variables['DemandName'],AgentNumber)}}:
demands: AgentNumber -equals $(DemandValue)
Related
Are there any widely accepted methods for an *.exe to detect if it's running as part of an ADO pipeline?
The script will be running both as part of a pipeline and on workstations and should be able to determine with very high confidence where it is running, if possible.
Eg. any pre-defined variables that are meant for this (could not find) or some other pre-defined value that can be inspected?
There is a whole number of predefined variables, most of which you could use, I would say. However, there is one which sounds like what you are looking for:
TF_BUILD
Set to True if the script is being run by a build task.
This variable is agent-scoped, and can be used as an environment variable in a script and as a parameter in a build task, but not as part of the build number or as a version control tag.
I am trying to create a simple Runtime Variable in my Release Pipeline that carries the BuildNumber of the Triggering Artifact.
I tried adding a variable called alias and in the value column I wrote $(Release.TriggeringArtifact.Alias) And I set the Settable at Release Time to true.
Then I added another variable called BuildNumber and I wrote this in the value column: $(Release.Artifacts{alias}.BuildNumber} and set the Settable at Release Time to true.
I have a powershell task that Echoes the value of my variable BuildNumber. I was expecting the build number that was assigned to my artifact, but what I see is the git repository's name instead.
How can I have release time variables with pre-defined variables substituted in them?
What you are trying to do is to use nested variable which is not supported:
Thanks for your patience on this. I checked with the product team and there are places where variables will expand when nested, and the behavior will be slightly different if you specify variables with macro syntax (example: $(var)). However, this is not an officially supported feature and their recommendation is to not document macro variables as expanding recursively.
If you would like to reach out the product team directly, please post in the Azure DevOps Developer Community. The product team actively monitors that space.
You can also vote on this on developer community
I'm trying to set up a variable in the Azure Build Pipelines Classic Editor to use conditional functions to determine its value. YAML is not an option (unless there's some way to inject YAML as part of a Classic build...?).
In my current scenario, the idea is that the variable would return one of a few possible string values (or empty string) depending on the branch that triggered the build.
I want something along the lines of this:
I fear this may be a YAML-only thing, but hopefully someone can tell me I'm wrong about that.
Like Matt mentioned in the comment, the best approach for this would be to use a script (powershell or bash) that will have the logic to set the variable.
For more details about how to set a variable, have a look at this documentation.
In my tests I'm using environmental variable. Due to security reasons, when setting it in azure devops pipeline I need to mark it as secret. Is it possible to pass it as argument, within vstest task?
Apparently lacking enough reputation to comment on the answer by #daniel-mann, I need to follow-up through an answer myself.
Regarding the use of a runsettings file;
Yes, I'm sure you can do it like this, but there's a much simpler way. In the task definition, you have the option to override test run parameters.
For a non-YAML pipeline, you do this in the "Override test run parameters" option (the tooltip says "Override parameters defined in the TestRunParameters section of runsettings file or Properties section of testsettings file. For example: -key1 value1 -key2 value2."), so like this then:
-SomeSecret $(SomeSecret)
For a YAML-pipeline, you can do this:
overrideTestrunParameters: '-SomeSecret $(SomeSecret)'
The nice thing is that the test run parameter that you'd like to override DOES NOT need to exist in your runsettings file. In fact, there's not even need for a runsettings file at all!
The bad thing about this approach in general is that you'll have to access your secrets through the "TestContext.Properties" collection (for NUnit), which really sucks if you want a transparent solution that works equally well both for local development (using "user secrets") and in an Azure pipeline.
Another potentially bad thing about this is that these "overridden" test run parameters are just that - parameters for THAT test run only. If you happen to have a mixture of .NET Framework and .NET Core tests, you would want to execute those in two different test runs (for it to work at all...), and then you'd need to duplicate those overrides (given that some of the same secrets are needed, that is).
Regarding adding an additional task in your pipeline to set the appropriate environment variables;
Absolutely. Using the "Batch script" task is well suited for this, where you just pass your secret-based variables as parameters to the script and pick them up inside the script file.
For this to work as expected, though, you will need to allow the task to modify the environment.
For a non-YAML pipeline, this is done by ticking off the "Modify Environment" checkbox.
For a YAML pipeline, you could do it like this:
- task: BatchScript#1
displayName: 'Export key vault vars as env. vars (for tests)'
inputs:
filename: 'ExportKeyVaultEnvironmentVariables.cmd'
arguments: '$(SomeSecret)'
modifyEnvironment: true
Where in the "ExportKeyVaultEnvironmentVariables.cmd" script, you just do this:
set SomeSecret=%1
Note: If your secret by chance has some funny characters, especially having a trailing "=" character, you might experience that what you get when collecting the parameter inside the script is NOT what you sent in.
You can avoid this problem by enclosing the parameters in double quotes, like this:
arguments: '"$(SomeSecret)"'
And then collect the parameter by removing those surrounding quotes by using the "~" parameter modifier, like this:
set SomeSecret=%~1
A nice bonus effect of this approach is that your shiny new full-blown environment variables persist for the remainder of your pipeline. Referencing back to my "bad thing" about having to potentially duplicate the test run parameter overrides, that would not be needed here.
Regarding the additional option mentioned by the OP;
Absolutely, in which case you wouldn't need a "Batch script" task (that needs to call a script file), but just a "Command line" task.
BUT, be aware of a possible gotcha! Yes, this will create an environment variable for your test code to pick up, if you access it through "Environment.GetEnvironmentVariable".
In my case, I was building an "IConfigurationRoot" instance, like this:
/// <summary>
/// Gets a configuration instance, based on user secrets (for local test execution) and environment variables (for Azure pipeline execution).
/// </summary>
/// <typeparam name="T">The type of the class that represents the "runtime" (and thus is able to get hold of any configuration).</typeparam>
/// <returns>An <see cref="IConfigurationRoot"/> instance.</returns>
public static IConfigurationRoot GetConfigurationRoot<T>()
where T : class =>
new ConfigurationBuilder()
//// Note: The "AddUserSecrets" method requires the "Microsoft.Extensions.Configuration.UserSecrets" package
.AddUserSecrets<T>()
//// Note: The "AddEnvironmentVariables" method requires the "Microsoft.Extensions.Configuration.EnvironmentVariables" package
.AddEnvironmentVariables()
.Build();
This works by adding various "configuration providers", which eventually allows you to access them all seamlessly through "configuration["SomeSecret"]".
What I found, though, if I'm not seriously mistaken, is that "SomeSecret" was still not available in the "EnvironmentVariablesConfigurationProvider" that's added, even though I could perfectly fine access it directly with the above mentioned method. Go figure (but I might be mistaken...).
Possible alternative approach (but for YAML pipelines only?);
It seems that for a YAML pipeline, you can explicitly set environment variables for a task, like this:
- task: VSTest#2
env:
SomeSecret: $(SomeSecret)
[...]
I haven't tested this myself, but seen a colleague do it (myself, I currently don't have a YAML pipeline). At least this variable can be picked up with "Environment.GetEnvironmentVariable", but I don't know if this can be picked up through an "IConfigurationRoot" instance.
I haven't seen any option to achieve the same in a non-YAML pipeline.
But again, this also suffers from the same possible "having to duplicate the environment variables across several test runs" problem.
See also my solution to my own question over at the Azure DevOps guys
I've been through this. There's no way to pass variables to VSTest on the command line, which means you have to jump through a few hoops.
You have a few options:
Use a runsettings file with a TestRunParameters section, then access it via TestContext.Properties["variableName"] within the tests themselves. You can use standard token replacement patterns to transform the XML file.
Use an app.config or appsettings.json (depending on your platform). This works pretty much the same as above, except, of course, you use the standard configuration classes to retrieve the values.
Add a step to your pipeline that sets the appropriate environment variables. Secrets don't get automatically mapped to environment variables for security purposes, but there's nothing that's stopping you from doing it yourself.
Move the secret values into a keyvault or some other sort of external secret storage and configure the test to pull the secrets at runtime.
I'm moving my configuration from using web.config transforms to being based on VSTS variables. I get process variables, you define a variable, pick an environment, and you're good to go. I also see "Variable Groups", these seem great, have KeyVault integration, and overall seem like a much better option.
But...I don't see a way to bind a Variable Group to a specific environment in my VSTS release process. I can't honestly see how these would be any use to me without this feature.
I've experimented with one workaround, but it didn't work. I tried:
Naming my variable group & variables with an environment prefix e.g.
Variable Group Name="Production ConnectionStrings"
Variable name="Production_LoggingConnectionString"
I thought once I linked the "Production_ConnectionStrings" variable, I could reference $(Production_LoggingConnectionString) from within a standard Process variable, but this didn't work.
I think I could come up with some powershell that would do something like the above and set variables, but this seems a bit too custom for me.
Does anyone else have an idea that I can use variable groups per environment, easily, without waiting around for VSTS to build this feature (if ever). Btw, if you want this feature, there is a suggestion here you can upvote: Make it possible to link a variable group to a specific environment in a release definition
This has now been implemented in VSTS variable groups as scopes. Go to your release definition -> Variables -> Variable Groups -> Link variable group, and you get the link window as below, where you can choose the scope to be either release or one or more of your environments!
I did not manage to find any release information on this feature, I just stumbled upon it as I was tweaking my releases.
I ended up using a powershell script to define my process variable based on the variable groups, it works great.
Let's say I want a variable named "LoggingConnectionString" and this has different values per environment
Steps:
Define a Variable group, e.g. "SharedLoggingVariables"
Inside this Variable group, define a variable/value for each environment, e.g. "LoggingConnectionStringDev", "LoggingConnectionStringProduction"
Back in your Process Variables for the Build/Release, make SURE you don't have a variable named "LoggingConnectionString", otherwise this will overwrite the value coming from the variable group
In your Release process, create a Powershell inline script at the beginning of the Agent with the following code
Param(
[string]$LoggingConnectionString
)
Write-Host "##vso[task.setvariable variable=LoggingConnectionString]$LoggingConnectionString"
Pass your variable group as an argument to this inline powershell, e.g.
-LoggingConnectionString "$(LoggingConnectionStringDev)"
The final powershell step should look something like this:
During release, the powershell will set your process variable from the variable groups. If powershell isn't an option for you, there are other options
No, there is no way to use variable Groups per environment.
As the user voice you linked, you can vote and follow up for the suggested feature.
The work around for now is using environment variables to overwrite the variables in variable Group.
Assume the variable LoggingConnectionString with the value Server=myDB in variable group need to be used both for Dev environment and staging environment. But for staging environment, it needs to use another value (such as Server=stageDB) from the variable LoggingConnectionString. So you can add the an environment variable LoggingConnectionString with the value Server=stageDB for staging environment.
When the variable $(LoggingConnectionString) is used in Dev environment, it will use the value (Server=myDB) defined in variable group.
When the variable $(LoggingConnectionString) is used in staging environment, since the variables both defined in environment variable and variable group, it will use the value (Server=stageDB) defined in environment variable.