I have a new internet service provider, and thus a new broadband router, a Sagemcom Fast 3890. I have some Raspberry Pis on the inside, that I need to open to the internet, so I've set up some port forwarding. However, when I activate port forwarding, local access is no longer possible.
Example: I configure the Pi on 192.168.0.15 as a web server. I can access http://192.168.0.15/ and see the web page. When I activate port forwarding, I can now see the web page on my external IP address, but I no longer get a response from http://192.168.0.15/ - the request simply times out.
This is a basic Raspbian install, nothing funny. Only thing is my broadband router is new. Is this a feature or a bug?
This is obviously just the behavior of some broadband routers.
I have 'Socket test v-3.0' software installed on two different PCs.
Using it can create a TCP server on 1st PC and a TCP client on 2nd PC.
When I connect both the PCs on LAN I can establish a connection & can communicate between the Server & Client.
But, When I connect both the PCs to individual Internet connections (Using dongles having different ISPs), I couldn't establish the connection between the Server & Client.
How can I do that?
Please help me out..
The private address 192.168.x.x is address that can be used for direct connection only in your private network. If you want to connect to your machine from public internet you have two options:
Get a public IP address
Configure a port forwarding
Public IP address could be get from your internet provider but it is usually requires some extra payment dependent on your service provider policy.
Port forwarding can be configured at the device at the border between your private network and internet. The device does the NAT (network address translation) between your private network and intenet. Use google if you are not sure about NAT.
Such a device can be your own device like an ADSL modem or a set top box. But such a device could be in the internet provider network. If you own the device then you can configure the port forwarding yourself. Modems usually have a web interface where you can easily configure port forwarding. See the documentation to your modem or whatever you have.
If the NAT device is in internet provider network then you have to ask it to configure port forwarding for you. Before you ask please read something about port forwarding so you are sure what you want to configure.
I like to connect to a TCP server that run in a machine that is connected to the LAN in my home network. This LAN can be connected to internet via either following methods.
1. Through a router which has a wireless or wired WAN connection
2. Through a router which uses a mobile broadband connection, for example a router that accept a USB modem to connect to internet.
I know in the first case, we can use port forwarding.
In the second case, I believe telcos use PPP protocol and port forwarding does not work.
In addition, even in the first case, if ISP does not give a static IP, then we need to use DNS mapping service to map a fixed URL to the allocated dynamic IP and we need to configure router to go and register the dynamic ip at the start up.
My question is, are there any other better methods that can be used in this situation? I am wondering how chat applications connect to each other? I hope they maintain a TCP connection between two devices, without a central relay server?
I implemented a web service for an Android application. The web service is running on my local host (192.168.1.2). Using the Android emulator I succeeded to connect to web service. The I tried to connect my Android device using debugging mode to web service but it didn't work. So my question is if it is possible to connect an Android device to this web service that is running on my local host (192.168.1.2) without using a real IP ?
It's much simpler way supported by google!
Connect your phone via usb to computer and enable usb debugging
On your computer open Chrome browser and type exactly this address: chrome://inspect/#devices
Now you can link your computer port to your device port by port forwarding button. On my computer I have service on address localhost:61437 and I just linked it to device's 8081 port. Remeber to check 'Enable port forwarding' checkbox
screen from service on my computer ( localhost:61437 )
screen from my mobile browser with the same service ( localhost:8081). And that's it. Also you use this service address in your application
Did you already solve your problem? I also got a problem like you. These are the steps that I already done:
unplug lan cable or turn off any other internet connection from your pc.
connect your android mobile to your pc using usb.
turn on usb tethering
back to your pc. check your ip. mine is 192.168.42.37
check your webservice app in your pc. let's say http://192.168.42.37/webserviceapp
back to your android mobile. try this url http://192.168.42.37/webserviceapp
Now you can access your webservice app in your pc from your mobile phone.
Well your localhost is 127.0.0.1 (or ::1) and your LAN IP is 192.168.1.2. Each pc/device that are connected under your LAN could reach your webservice on IP 192.168.1.2
Your Android device must be so connected under the same LAN maybe through Wifi connection so it will be able to talk with 192.168.1.2.
If you can't connect your Android device under the same LAN eg you have just a 3g connection you need to play with your router/firewall to redirect all incoming traffic (maybe just the http traffic) from your public ip to you private ip (192.168.1.2)
Hope this help
I'll throw in my process, since nothing on SO worked for me. Here are the steps I took to connect my physical android device to the web service running on my laptop (connected to the phone) on localhost:
Enable USB debugging on your Android device
Run your web service on your machine. My web service runs on localhost, port 3000 in development: http://localhost:3000/api/...
Run ifconfig (Unix), or ipconfig (Windows)
Find your machine's inet address on your LAN interface. Mine is 10.0.0.121 for interface wlan0. Externally, it is 68.43.XX.XXX, which is not the address that you want to use.
Use the LAN IP since you are connecting to your service on LAN, otherwise you might get an econnrefused (connection refused) error due to firewall rules
Build your http URL with that IP address, and the port that your web service is running on. For me, it's http://10.0.0.121:3000/api/...
When you launch your app, you should connections to your local web service in logs, Wireshark, etc, and you should see the desired activity/data in your Android application.
I had the same issues, researched a lot then found out that you have to explicitly make changes in your firewall settings. Your firewall is blocking your code to be accessed from external source. So, all you need to do is, go to firewall settings, add port 80 (in my case since, I am using Apache http Server) for inbound and outbound. Now, you can test it on your phone's browser http://192.16..**:80/
I've done that on a Mac using GasMask and Charles Proxy Server. Your phone and your computer have to be on the same network.
say the webservice url you want to access is at http://api.xyz.com, you first use GasMask to point that url to your localhost, then use Charles to set up a proxy server. Then you go to the settings on your phone, go into Wi-Fi, long-press the network you are connected to, choose Modify Network, and enter the proxy settings Charles gave you.
In my case, nothing of these solutions works because Windows firewall blocks it, but putting a rule on the firewall hasn't effect.
The problem in my case is that my laptop is connected with Wifi and Windows had the Wifi connection like a Public network. I must to change the network connection to Private network. http://www.comofuncionatodo.net/tecnologia/informatica/como-cambiar-de-red-publica-a-red-privada-en-windows-10/
I agree with the other answers as good approaches if you don't want to expose your DEV webservice on the internet. However, it's much easier if you do just expose the webservice. There's a number of free DNS services, but I've found no-ip to be the easiest to set up. I use it for exactly the purpose that you asked about; so I can test with my DEV webservice on a real device.
If you choose to go with no-ip (I have no affiliation with that company, it's just the one I've used and am familiar with), you can get a free publicly accessible URL like http://MyExampleWebServer.no-ip-org, and no-ip has a utility you can install so even if you're behind a dynamic IP, it will always keep the correct external IP associated with that URL. If you're working from your house, then you'd just need to make sure you port forward traffic from port 80 to your internal 192.x.x.x IP address (or whatever port you use; maybe 443 for ssl).
It's as easy as that, and now you can hit that webservice from any device that can access the internet.
I haven't worked with it, but I believe dyndns also offers a similar service.
This solution is for GAE development server in Eclipse
Step 1: Get the LAN IP
Goto your Windows Command Console (Press Win+R, then type "cmd"). In the console, enter "ipconfig". You will see a list of display. Under Wireless LAN adapter Wi-Fi, get the IPv4 Address. It will be something 192.168.x.x
LAN IP : 192.168.x.x
Step 2:
Go to Eclipse, Open the Configured server
Under Properties of GAE Development Server -> Local Interface address to bind to, enter the LAN IP address, and save.
Step 3:
Now you can access the GAE server by
http://192.168.x.x:8888/
8888 - Refers to the Port Number, as mentioned in the GAE development server
In order to access local web services using their own server hosts rather than IP addresses with ports, do these following steps:
Make sure your Android device and your local machine are on the same network.
Install SquidMan on your Mac, Linux, or any other Proxy Server.
Configure the proxy server's HTTPPort (ex. 5555) and clients (ex. 192.168.0.0/24) to your own network mask, and run the proxy server.
You are either using the web services in:
a. A web browser: Configure the proxy settings of your Android device from Modify WiFi networks.
b. Android application:
Set up the Proxy for your HTTP client. If you are using Volley, check this out: Volley Behind a Proxy server.
You can now connect to it by using whatever URL you are using on your host to connect to the web service (ex. http://my-local-machine.com)
Hint: If you got 4xx response codes, make sure your web service allows connections from other non-local-hosts.
If you are referring your localhost on your system from the Android emulator then you have to use
http://10.0.2.2:8080/
Because Android emulator runs inside a Virtual Machine(QEMU) therefore here 127.0.0.1 or localhost will be emulator's own loopback address.
I want to connect to a system which is behind a router. I know the public address of the router as well as the private ip (fixed always) of the system. How do i establish socket connection with the private ip?
This is why some people say that they are behind a "firewall", when they are behind a router. The Evil Viruses Of The Internet are not able to exploit any software on a computer behind a router (provided that the router admin didn't configure it in the funny way, for example by enabling DMZ).
You still have some options:
Talk to the router admin and make him forward a port for You
Take the router out and put Your "target" computer where Your router was, or enable DMZ (this only makes sense if there was only one computer behind the router). Warrning: install a firewall on the target computer first!
Turn the socket 180 degrees. Make the computer behind a router establish the connection to the server that has a public IP address
Use something like UPnP, if Your router supports it
Get a dedicated IP address for Your computer and configure router to switch all traffic to this IP address to Your computer (this is similar to DMZ, but would work if You have more than one computer behind the router). Warrning: install a firewall on the target computer first!
Use NAT traversal. There is a very good article on the subject here. Simplified version is that client establishes connection to some remote server. The server can see the opened port number on the client's router and this port is assigned to the client's machine, so it (or some another computer sharing this information) may establish connection to that port and reach the client's application. Warrning: this doesn't work with all routers. Some routers just won't let this happen.
The simplest thing is probably to forward the port from the system you want to connect to through the router.
This is more a question of configuration of the router as opposed to your actual program. If the router isn't configured to forward traffic to the private system, there's no way to force it to connect you - rather, the private system would have to open the connection on its own.
Strictly speaking, the answer to your question is "you can't". You can however enable DNAT (Destination Network Address Translation) on your router. You connect to a certain port on the router, and it forwards the connection to the internal ip. The internal ip (and port) are configured in the router settings and are not known by the connecting client.