I've been stuck with this for a while and I couldn't find something similar asked previously (or I have failed in doing so)
My situation is fairly simple: I have a cell array of objects. They are all the same object and I have a get function for this kind of object which is: get (obj, attr), where obj is the object in question and attr is a integer from 1-6. Depending on the number the get function returns the corresponding attribute.
I would like to obtain all of my "position" attributes from all my objects which are in the corresponding cell array (this would be attr = 2). I know that cellfun performs a function on all cells, but the question is, how do I use my get function here for all my objects, taking into account that the function is get (obj, attr) ?
Thanks in advance
Firstly, by using get as a custom function you are shadowing the built-in get function - this is bad practise!
With this in mind, and to avoid confusion with the built-in get function which has similar syntax, I'm going to use getattr as a stand-in for your custom function which accpets an object and an integer 1 to 6.
pos = cellfun( #(obj) getattr( obj, 2 ), myCellOfObjects, 'uni', 0 );
By specifying 'uni', 0, the output doesn't have to be scalar and will be put into a cell array. This is useful when, for example, you have a multi-element array for your position.
This is equivalent to the following loop:
pos = cell( numel(myCellOfObjects), 1 );
for ii = 1:numel(pos)
pos{ii} = getattr( myCellOfObjects{ii}, 2 );
end
If ever in doubt about cellfun or arrayfun, just write a loop first - they are essentially the same but more concise.
There is a trick to this some are unaware of: you can pass multiple arguments to cellfun like this:
cellfun(#(obj,attr) get(obj,attr), {obj1,obj2},{attr1,attr2},'uni',0)
if you want to get one attribute of the cellarray (instead of providing an attribute for every object in the cellarray), then you can simply use this
cellfun(#(x) getattr(x,attr),obj,'uni',0)
put into anonymous function for convenience:
get_attr = #(obj,attr) cellfun(#(x) getattr(x,attr),obj,'uni',0)
%use:
get_attr(obj_in_cellarray,'myattribute')
%returns cell array of object attributes
I haven't run any of these functions since you didn't provide any example data / code. Please test and feedback.
Related
I need to pass a part of a structure's name into a function.
Examples of a available structs:
systems.system1.stats.equityCurve.relative.exFee
systems.system1.stats.equityCurve.relative.inFee
systems.system2.stats.equityCurve.relative.exFee
systems.system2.stats.equityCurve.relative.inFee
systems.system1.returns.aggregated.exFee
systems.system1.returns.aggregated.inFee
systems.system2.returns.aggregated.exFee
systems.system2.returns.aggregated.inFee
... This goes on...
Within a function, I loop through the structure as follows:
function mat = test(fNames)
feeString = {'exFee', 'inFee'};
sysNames = {'system1', 'system2'};
for n = 1 : 2
mat{n} = systems.(sysNames{n}).stats.equityCurve.relative.(feeString{n});
end
end
What I like to handle in a flexible way within the loop is the middle part, i.e. the part after systems.(sysNames{n}) and before .(feeString{n}) (compare examples).
I am now looking for a way to pass the middle part as an input argument fNames into the function. The loop should than contain something like
mat{n} = systems.(sysNames{n}).(fName).(feeString{n});
How about using a helper function such as
function rec_stru = recSA(stru, field_names)
if numel(field_names) == 1
rec_stru = stru.(field_names{1});
else
rec_stru = recSA(stru.(field_names{1}), field_names(2:end));
end
This function takes the intermediate field names as a cell array.
This would turn this statement:
mat{n} = systems.(sysNames{n}).stats.equityCurve.relative.(feeString{n});
into
mat{n} = recSA(systems.(sysNames{n}), {'stats', 'equityCurve', 'relative', feeString{n}});
The first part of the cell array could then be passed as an argument to the function.
This is one of those cases where matlab is a bit unhelpful in the documentation. There is a way to use the fieldnames function in matlab to get the list of all the fields and iterate over that using dynamic fields.
systems.system1.stats.equityCurve.relative.exFee='T'
systems.system1.stats.equityCurve.relative.inFee='E'
systems.system2.stats.equityCurve.relative.exFee='S'
systems.system2.stats.equityCurve.relative.inFee='T'
systems.system1.returns.aggregated.exFee='D'
systems.system1.returns.aggregated.inFee='A'
systems.system2.returns.aggregated.exFee='T'
systems.system2.returns.aggregated.inFee='A'
dynamicvariable=fieldnames(systems.system1)
This will return a cell matrix of the field names which you can use to iterate over.
systems.system1.(dynamicvariable{1})
ans =
equityCurve: [1x1 struct]
Ideally you would have your data structure fixed in such a way that you know how many levels of depth are in your data structure.
I want to splice a list of arguments to pass to a function. For a vector I know that I can use num2cell and call the cell with curly braces (see this question), but in my case the list I want to splice originally has structs and I need to access one of their attributes. For example:
austen = struct('ids', ids, 'matrix', matrix);
% ... more structs defined here
authors = [austen, dickens, melville, twain];
% the function call I want to do is something like
tmp = num2cell(authors);
% myFunction defined using varargin
[a,b] = myFunction(tmp{:}.ids);
The example above does not work because Matlab expected ONE output from the curly braces and it's receiving 4, one for each author. I also tried defining my list of arguments as a cell array in the first place
indexes = {austen.ids, dickens.ids, melville.ids, twain.ids};
[a,b] = myFunction(indexes{:});
but the problem with this is that myFunction is taking the union and intersection of the vectors ids and I get the following error:
Error using vertcat
The following error occurred converting from double to struct:
Conversion to struct from double is not possible.
Error in union>unionR2012a (line 192)
c = unique([a;b],order);
Error in union (line 89)
[varargout{1:nlhs}] = unionR2012a(varargin{:});
What is the correct way for doing this? The problem is that I will have tens of authors and I don't want to pass al of them to myFunction by hand.
As #kedarps rightly pointed out I need to use struct2cell instead of num2cell. The following code does the trick
tmp = struct2cell(authors);
[a, b] = myFunction(tmp{1,:,:}); %ids is the first entry of the structs
I had never heard about struct2cell before! It doesn't even show up in the See also of help num2cell! It would be amazing to have an apropos function like Julia's....
This is NOT a question where I need to know how to add A+B in MATLAB. This is more of a code design question.
I have few function files that return a numeric matrix and index info on the matrix. For example
function [Mat1, IdxID, IdxDate, IdxVal, IdxMarker, IdxOpen, ...] = First ()
....
.... % where IdxId = 1 ; IdxDate = 2 ; ...
end
function [Mat1, IdxUid, IdxName, IdxVal, Mat2, IdxUid2, IdxSalary2, ...] = Second ()
....
.... % where IdxUid= 1 ; IdxName= 2 ; ...
end
As you can see the code becomes clunky and when I call these functions, I have to declare an equal number of outputs to catch all the indices. The advantage is if I suddenly swap ID & Date columns, the calling functions do not change as I simply make ID=2, Date=1. I also have the advantage of renaming these variables inside the function.
Is there a better way to do this? I'm testing whether struct or cell can be used for indices. I can't use datasets or cell for returning numeric matrix. Too much time is lost in translating it into numbers. Thanks.
Yes, you can return arrays/cells/structs instead. For instance, id can be a struct with multiple variables. Your function definition could be as follows.
function [Mat, Id] = Second ()
...
end
In your function, have the following set:
Id.Name
Id.Val
Id.Salary
...
If you find that you have multiple structs with the same exact structure, you can even consider objects.
Please clarify with more details on the structure if you want a more detailed answer.
For (MEX) function calls it would be really nice to pass several properties of one object at once. Instead of foo(myObj.propA, myObj.propB) I want something like foo(myObj.[propA,propB].
Is this even possible?
With structs it is possible to use the getfield() function to get the data from more than one field, e.g.:
getfield(myStruct, {index}, {'fieldA', 'fieldB'})
But unfortunately, the following attempt to get more than one property from an object results in an error (Index exceeds matrix dimensions):
getfield(myObj, {index}, {'propA', 'propB'})
Maybe the only possibility is to write a function which returns several output arguments:
[varargout] = getProps(object,propnames)
for p=1:numel(propnames)
varargout{p} = object.(propnames{p});
end
But if I call another function with that function as input, e.g. sum(getProps(myObj,propnames)) only the first output argument of getProps is passed and I fall into despair. Is there any other way?
For an object, you'd use get, not getfield (or dynamic access in a loop like you showed).
>> h = figure;
>> get(h,{'Position','Renderer'})
ans =
[1x4 double] 'opengl'
This doesn't work for all objects, but for MATLAB graphics objects it does work. To deal with any class, you can use your function, but with a custom cell output instead of varargout:
function C = getProps(object,propnames)
for p = 1:numel(propnames),
C{p} = object.(propnames{p});
end
Then inside whatever function you write, you can get a comma-separated list of all properties with C{:}, which will be suitable for a function that expects each property name input as a separate argument (e.g. C = getProps(myObj,propnames); x = myFun(h,C{:}).
I have a function which accepts a variable number of input variables. The problem is, the number of input arguments I'm going to provide varies. As such, I store all the arguments in a structure:
function grandAvg(datafiles)
% Load up all averaged datafiles
avgs = struct();
for n=1:length(datafiles)
avgs(n).avg = load(datafiles{n});
end
My question is, is there a way to expand this argument for the function? I need a way to convert this:
% DOES NOT WORK
avg = ft_timelockgrandaverage(cfg, avgs);
to this:
% WOULD WORK, BUT DO NOT WANT TO TYPE IT OUT
avg = ft_timelockgrandaverage(cfg, avgs(1).avg, ..., avgs(n).avg);
EDIT TO ADD: So apparently my question wasn't clear. I know how to construct the function using varargin. My question was, if I am trying to use a build-in function which I don't want to or can't modify, how can I provide arguments in a variable manner? I.e., I don't know ahead of time how many argument's I'll be providing, so when I call the function, I'll have to call it with X number of arguments. In effect, I'm looking for a way to turn this:
someVar <1xN struct>
into this:
someVar1 <1x1 struct>
someVar2 <1x1 struct>
...
someVarN <1x1 struct>
in a programmatic manner. Thanks!
An alternative to using a structure array to store your data would be to use a cell array. For example:
nFiles = numel(datafiles); %# Number of files
avgs = cell(1,nFiles); %# Initialize an empty cell array
for iFile = 1:nFiles %# Loop over the files
avgs{iFile} = load(datafiles{iFile}); %# Load the data into each cell
end
avg = ft_timelockgrandaverage(cfg, avgs{:}); %# Pass the contents to a function
The syntax avgs{:} dumps the contents of the cell array into what's called a comma-separated list. It is equivalent to typing avgs{1}, avgs{2}, ... , avgs{end}. The syntax foo(:).bar from the answer you found also creates a comma-separated list, but I find that using cell arrays for such a purpose is generally cleaner than using a structure array.
yes you can use variable length input argument list
varargin
http://www.mathworks.com/help/techdoc/ref/varargin.html
So, after playing around, I've got it. Using the example from above:
Given an 1xN struct named foo, where each foo(n) contains the field bar, I would call the function as:
function(foo(:).bar);
This is the same as typing
function(foo(1).bar, foo(2).bar, ..., foo(N).bar);
In this way, I can dynamically expand or shrink foo and still have no problem calling the function.
You can surely do such a thing, by means of the varargin construct in MATLAB. This will be something like:
avg = ft_timelockgrandaverage(cfg, avgs.avg);
And for the function ft_timelockgrandaverage
function output = ft_timelockgrandaverage(config, varargin)
% your code here
varargin will be a cell array: {avgs(1).avg, avgs(2).avg, ..., avgs(3).avg} which you can process.