I have image sensor data (in my case in a ROS bag file), that means many single images that I have to stream to a webinterface. The goal is to simply have a video in the browser where I can select the time on the seek bar, that means I don't want a live stream.
Live encoding and streaming with FFmpeg works.
What is the best approach? The total Content-Length is unkown, since it is on-the-fly encoding, so I don't know how to implement 206 Partial Content where I send a Content-Range. Even if this was working, I need to encode valid partial content with FFmpeg.
I can't seem to find a way in Wowza or any other solution like nginx-rtmp-module to take a live stream's RTMP metadata and insert it into the specific frames of the MP4 saved file.
Maybe I'm looking at this the wrong way, but our live streaming app only allows the broadcaster to post comments/feedback and we want to make sure the viewers see those comments on the exact frame that the comment was made on by the broadcaster. We tried having the two being separated where the video was streamed via wowza and the comments sent to clients via PubNub but there is just to much variance on when the comments show up.
The only way I can think of is to include the broadcaster comments inside metadate for the specific frame the comment was made. Then we'd be guaranteed to have the comment show up in the right place.
Help is much appreciated.
Thanks!
I am creating a Samsung TV app for a radio station and they provide the "Now Playing" info within the Icecast stream. Is it possible to (and how do I) extract this information?
Shoutcast supports "Icy-MetaData" - an additional field in the request header. When set, its a request to the shoutcast server to embed metadata about the stream at periodic intervals(once every "icy-metaint" bytes) in the encoded audio stream itself. The value of "icy-metaint" is decided by the shoutcast server configuration and is sent to the client as part of the initial reply.
Check out this post on Shoutcast Internet Radio Protocol for details on icy:metadata and sample code in C.
A somewhat more technical discussion is also available at
http://forums.radiotoolbox.com/viewtopic.php?t=74
Yes, this is possible. The metadata is interleaved into the stream data at a specified interval. Basically, you read 8192 bytes (or whatever is specified by the Icy-MetaInt response header), and then you read the metadata block.
The first byte of that metadata block tells you the length of the data. A length of 0 means there is no updated metadata.
Once you read the meta block, then you go back to reading stream data.
I have all of this in more detail on my answer here: https://stackoverflow.com/a/4914538/362536 While I know you're not writing PHP, the principal is identical no matter what language.
From native player there is no option to get this meta.
You could probably use jQuery.stream plugin to fetch the meta directly - but you need to setup Access-Control-Allow-Origin on you icecast server - but I have no idea if it will work.
The best solution here will be to use this script:
http://code.google.com/p/icecast-now-playing-script/
So you install this script on your web server and from the SmartTV application you will AJAX it once for a while, while your stream is playing.
I just created a radio player for icecast and centova, it uses lastFM api to extract the song meta data. https://github.com/johndavedecano/Icecast-Centova-LastFM-API
If you are doing this for a radio station, then they can provide this data through the XSLT feature of Icecast. Some random old XSLT examples for offering stream metadata that I did at some point.
The other option is to run Icecast 2.4.1 or add the two files (xml2json.xsl status-json.xsl) to an old version.
Note that only Icecast 2.4.1 or newer supports adding CORS/ACAO headers that might be necessary to access data from a web app / web site.
If you are not directly cooperating with the radio station and can't ask them to do this, then disregard this answer. Someone else might find it useful though.
I'd making a relay audio stream server (like shoutcast relaying but with customization) in PHP.
Is it possible to dynamicly add IDv3 tag's every specified pack of data (maybe every second - every 64KB)?
If it`s possible how to do it?
IDv3 tags occur at the beginning of a mp3 but as an mp3 is just a series of frames due to the way it's possible to cut them with say mp3splt without re-encoding that stream would be IDv3 tags followed by mp3 data and then it would repeat in the same format for the next part of the stream
clearly i'm ignoring a lot of the details
I'm working on a streaming server that will be capable of broadcasting targetted ads. Basically listeners hear the same music, but every, say, 30 minutes comes a block of ads and every listener has his/her own block. Implementing such streaming server poses various problems and this question is about one of them.
The server will work in a manner similar to Icecast, i.e. it will read the stream over the network from some stream generator and relay it to every listener. When it's time to broadcast ads, the server stops fetching the stream from the generator, reads ads from files and inserts them into each listener's buffer, transmits them and resumes on relaying stream from the generator.
When the server switches from relaying stream to broadcasting ads, it has to concatenate two MP3 streams (we broadcast in MP3). My concern is that simply appending one piece of data after another may produce some audible artifacts. Can it be done seamlessly?
I've already figured out this:
- I can make the server be aware of MP3 frames to avoid sync errors.
- I'm thinking about appending MP3 frames from the ad file after MP3 frames from the stream.
- Since ad is loaded from properly encoded MP3 file, I circumvent the problem of byte reservoir, because the first frame from the file can't use it.
But my concern is the way MDCT works. Listeners have no idea of what my server will do, so their MP3 decoders may produce some artifacts because incorrect MDCT data will be placed one after another in the stream they download. Will zero-padding at the beginning of the file with the ad compensate for this?
Do you know any libraries/tools (open source if possible) that can seamlessly join two MP3 files without decompressing them?
Can you point any good resources describing MP3 format? I searched Internet a lot, found lots of information, but I still miss the overall picture.
Maybe you know that this would be easier if I used another codec like OGG/Vorbis, AAC?
PS. This question is not a duplicate of What is the best way to merge mp3 files?. mp3wrap and tools alike are not an option for me.
I believe MP3s can be merged by simply concatenating the files. In some quick testing (cat file1.mp3 file2.mp3 > merged.mp3; mplayer merged.mp3) it seems to work as expected. Streaming from a web server probably will work just as well.
How are you going to handle switching the current input file? You can simply treat the advertisements as short tracks to play.
You should be able to concatenate mp3 files of both CBR and VBR formats.
MP3 files do not have a main header (disregarding ID3 and Xing). The audio data is stored as chunks where every chunk includes its own header. The header contains the necessary information (bitrate, sample frequency, stereo, etc) for the decoding of the audio data in that chunk.
This is one of the reasons why it is difficult to determine the duration of a mp3 file.
Another way of looking at it is, if you concatenate a CBR MP3 file with a VBR file, the end result is the same as one long VBR file with the first section of Audio at a constant bitrate.
The issue is that some MP3 players may be strict and expect a Xing header for a VBR MP3 file. This however was never the specification for the MP3 format but it is now assumed to be true.
If you're on Windows, the Microsoft DirectShow API may be the way to go. You should find that is is capable of doing things with audio and video both statically and streaming, in a variety of formats (you only need the necessary codecs, and the interface is virtually the same for all).
Saying this, DirectShow is unfortunately designed in a horribly intricate way, and has a steep learning curve, but the power it offers in unparallel if you're going to be doing audio/video manipulation on Windows. There are however a great number of samples and tutorials on how to use it, so it may not be so painful in the end. Also, if you're using the .NET Framework, there is a managed wrapped by the name of DirectShow.NET. It's not going to be an easy task whatever you do, unless there's something out there than I'm not aware of. Good luck with it anyway!
I approached a very similar problem, and after asking the right questions at various sources came up with the following...
Any worthy decoder will skip "bad" data until it hits a valid frame header. This is what ID3v2 relies upon to inject additional information into mp3 data. At the server, I'd go with analysis of source MP3 files to only serve valid MP3 frames. If you serve a few silent frames (about 7 should do it), the decoder should have time to settle before ramping up for the next load of (unassociated) MP3 data, avoiding the artefacts you (correctly) assume when concatenating frames from different encoding sessions.
More problematic is the possible switching of MP3 attributes (1/2 channels, output sample rate etc) between one frame to the next. Some decoders get quite upset when confronted with such a stream, resulting in 1/2 speed playback and the like. So, you need to ensure that all your source material is encoded to the same output attributes otherwise you may come unstuck.
You may have seen this already, but if not:
http://www.devhood.com/tutorials/tutorial_details.aspx?tutorial_id=79&printer=t
I don't see why you would want to concatenate the files. Why don't you use some sort of play list system and just change which file your sending. I would think this would allow more flexibility in the long run, and you wouldn't end up with large MP3 files.