I can't find any document or window object that I can use https://developer.mozilla.org/en-US/docs/Web/API/Element/paste_event.
I know there is a clipboard variable but is there an event?
It seems like it would be possible to detect pastes with fairly high confidence by:
Subscribing to workspace.onDidChangeTextDocument(workspace api) to get all text edits
On edit, check env.clipboard.readText() to get the current content of the clipboard
From the TextDocumentChangeEvent, check each contentChanges entry's text and see if it matches the clipboard text
If it matches (and it isn't a trivial edit like a single character), they probably just pasted.
Related
So I am having a problem. This is what I can create on one of my laptop:
On another, when I created something that has {TC} in it, the whole field code disappeared.
For the example above, if on the other computer, both are running Office 2010,
I can input the code to create the table of content from:
{TOC \f \h \z \f 1\t "Heading 1,1,Heading 2,2,Heading 3,3,Title,1}
to
{TC}
The moment I type in TC, the whole {} disappears.
Other field codes work just fine, except for {TC}. So my question is how do I get {TC} to show on my other laptop?
Thank you for your time.
Apparently, I found my answer.
When I searched google for my answer, most sites give this as a solution:
For Word 2010, go to File->Options->Advanced
Under Show document contents: Select "Show field code instead of their values"
This is the equivalent of pressing Alt+F9, which DID NOT solve my problem.
Apparently, the solution to get {TC} to show in your document is in:
go to File->Options->Display
and check to always show HIDDEN TEXT.
I hope this helps someone in the future.
Yeah, the disappearing TC code is annoying at first -- seems like it's broken. Other codes work, but why does that disappear, even if entering manually? Word instantly sets TC code to Hidden, even the field code itself.
To temporarily toggle this visible without permanently changing your display to show Hidden Text, you can use the normal Ctrl-Shift-8, which toggles display of spaces, paragraph marks, tabs, and Hidden Text, on and off. This is a good keyboard shortcut to have in your standard back of tricks anyway. It is frequent in Word that you need to toggle paragraph marks on and off, because paragraph formatting is attached to the Paragraph mark, and when they're hidden, it can be tricky to fix various formatting issues.
The original post was a few years ago, but I fear things have gotten worse since then, not better. I am using Word 365 v2201, which should be up to date. The other day, I wasted hours on trying to resolve this issue with TC field codes.
First I tried entering them using Insert > Quick Parts > Field. Word creates what looks like a field code, but it behaves as normal text. Messing around with the various controls to toggle field display and hidden text etc etc, has absolutely no effect. It is basically a faux field. And of course, it is completely ignored when compiling the TOC.
Next, I tried entering it manually, by using Ctrl + F9 to either create a blank field or convert some existing text into a field. Same result as above.
As with the original post, this seems to afflict only the TC field code. Other codes work fine, including TOC. And if I create a TOC field, then edit the code to TC, it immediately loses its properties as a field. If I then put the O back in, it immediately behaves as a field once again. Unlike in the original post, adjusting the settings for field display and/or hidden text, have no impact.
In the end, the only solution was to create the field using Alt + Shift + o to open the Mark Table of Contents Entry dialog box. And finally, this works!
I am an Autohotkey user. How can I make some text in clipboard having bold style. Actually, I want to get some text as input from clipboard and then change style (bold or unbold) of some words in there and eventually to paste the enhanced text to where it was previously copied. Also notice that the existing format of the text is important (thus using ClipboardAll) and I don't want to lose the original format; just to change / modify style of some words in there.
Any idea / clue to accomplish this?
Thanks
I assume you're working in word or some other text editor that allows Ctrl+B to bold highlighted text. Something like this should work.
clipboard =
ClipWait,,
OutVar := StrLen(clipboard)
;put code for navigating to your paste place here
send,^v
send,{Shift Down}
send,{Left %OutVar%}
send,{Shift Up}
send,^b
send,{end}
;send,%OutVar%
I'm kind of an amateur at this, but I tested it and it seems to work if you want to bold the entire clipboard. If you're bolding only certain words within a clipboard... I'm not sure. Personally, I would create a script that transfers the clipboard to Word or some other rich text editor, then use ^f to find the words I'm looking for (using input or InputBox), and then bolding those words in the style used above, and then copy/pasting the finished work to the final destination.
But there's probably an easier way to do it...
EDIT: InStr() might help you there... check the AutoHotkey help for more info about InStr().
Any one know how i can create a text area which displays lines of text which can not be edited but allows you to edit the bottom most line for text.
basically in a similar fashion to embedded consoles inside applications that allow you to run code direct on the application.
currently using a textview i can go and edit the code above and the output response are also editable.
It's possible using a GtkTextView, but not trivial. You have to create a tag that makes the text uneditable, and apply it from the beginning of the buffer to just before the end position. Then when you receive and process input, extend or re-apply the tag to cover that line of input and your program's response to it.
Here's an example of it being done:
creating the tag
applying the tag
I have a Word document with fields of the reference variety, which occur in the form "[field].[field]"--in other words, there's a period between the two fields. I want to globally replace this with a space.
Word offers the ^d special character to search for fields, but for some reason the query "^d.^d" does not find anything. However, ".^d" does. Now comes the problem, however--what do I specify as the replacement text in order to retain the field code? If using regular expressions, I could use a "Find What Expression" such as \1, but with regexp ("wild card") mode the ^d is not permitted.
I guess I could write a macro...
I would like to add to Bibadia's solution.
An example of an index entry field; we want to change a name we misspelled.
Make sure hidden formatting is displayed (toggle with SHIFT+CTRL+F8).
Make sure wildcards option is not selected. To search for fields, use the opening and closing field braces code (optionally use ^w for spaces, as Bibadia suggested):^19 XE "Deo, John" ^21
Replace won't recognize field braces character, but will allow to insert the clipboard's content. ;). To do that, insert in text the correct entry. CTRL+F9 to insert field and type:XE "Doe, John"
Select the field above and copy
Use ^c in the replace box
Hit Replace All
Ta-da!
It's usually better to go the macro route when finding fields because, as you say, the find algorithm that Word uses doesn't work the way you might hope with fields.
But if you know exactly what the fields contain, you can specify a search pattern that will probably work (however not in wildcard mode).
For example, if you want to look for figure number field pairs such as
{ STYLEREF 1 \s }.{ SEQ Figure \* ARABIC \s 1 }
(which would typically be the same set of fields everywhere in the document)
If you only really need to look for the following:
{ STYLEREF 1 \s }.<any field>
you could ensure that field codes are displayed and search for
^d STYLEREF 1 \s ^21.^d
or
^19 STYLEREF 1 \s ^21.^19
If you need to be more precise, you can spell out the second field as well.
"^d" only works for finding the field beginning, not the field end.
It's a shame that ^w wants to find at least 1 whitespace character because otherwise it would be more robust to look for
^19^wSTYLEREF^w1^w\s^w^21.^19
Perhaps someone else knows how to work around that without using wildcards?
Torzaburo,
I suggest that you do this using a macro. You can start by recording the macro, and later refining your processing steps within the macro.
First turn on the hidden characters by navigating to Home > Paragraph > toggle the show/hide Paragraph symbol. Also, select all and toggle the field codes on (right-click and select "Toggle Field Codes".
Open a new blank Word doc in addition to the one you have open. You will use this later. Start the macro recording and find the field using the "^d" (field code) as you said.
When the field is found, copy only the field text within the brackets, and not the full field reference. While the macro is still recording, ALT + TAB to the new blank document and paste the field code in as plain text.
At this point, do the necessary find & replace processing to the field codes. Highlight the processed field codes, copy, ALT + TAB back to the original document, and paste back between the { } brackets.
Stop the macro recording. Add any further custom processing to the macro VBA.
Select-All and re-toggle the field codes. Update the field codes.
You don't need a macro. Just toggle all field codes on by using Alt+F9. Then do a find and replace for what you want to change. Once the replacement is complete, use Alt+F9 again to toggle the field codes back off.
Disclaimer: I didn't originate this solution, but it's clean and elegant and I thought it should be included here:
(Adapted from Search & Replace Field Codes in Word):
Create or find a single instance of the field you want to convert text to
Toggle Field Codes visible (AltF9)
Copy the code for the field you want to use to the Clipboard (highlight and CtrlC)
Open the Replace dialog box (CtrlH), insert the text you want to replace in the Find What box and then enter ^c in the Replace With box.
This will replace your text with the contents of the Clipboard, turning it into the field code you copied in step 3. It also copies formatting information (font, color, etc.), to control how the field will appear when hidden. (Caveat: I've tested this with Word 2003 under Windows 7 only.)
Coming in late on this, probably way too late for Beth (sorry Beth). And this may not be quite what Beth was looking for. But for anyone interested ...
It sounds like Beth may have created captions throughout the document using INSERT CAPTION (hence the presence of field codes). This means these captions will have been (automatically) created in CAPTION style.
To globally replace the separator "." with " " (space) in such captions, take two steps:
[1] Go to REFERENCES | INSERT CAPTION, then click on NUMBERING and replace the SEPARATOR "." with "EM-DASH". This will replace all separators in captions for the selected label in the CAPTION Window. If you have other labels in use in the document (e.g. FIGURE), select the other labels one by one and repeat this process.
[2] Do a find/replace searching for special character "em-dash" (^+) in style CAPTION, replacing with " ". Click REPLACE ALL.
Voila!
NOTE: This presumes that em-dash does not appear in the caption text anywhere. If it does, then you'll need to do a pre- and post- "fiddle" to ensure these em-dashes are not touched by the global replace above.
The "pre-fiddle" is to do a global find/replace across captions, replacing the em-dash ("^+") with some other string (e.g. "EM-DASH") that doesn't ever occur in any caption's text. Then you do the separator change as described above. Finally, the "post-fiddle" is to restore the em-dashes that were in the captions, by doing a global replace of the string "EM-DASH" with the actual em-dash character "^+".
I'm new to n++, but I have been most impressed with this tool so far. I've been trying to record a macro that do a search/replace, but the 'search' part seems to have the initial search text from the recording 'hard-coded' in the macro.
What I want is:
Manually locate the cursor at the beginning of the first line of a fixed format code segment, then Macro actions:
move cursor two lines down
move cursor right x characters
mark charters from pos x to x+n
search and replace all occurrences of the selected text with "{p_'selected text'}"
In an more advanced version, I'd like to add some logic to step 4: only execute the replace part if the # of occurrences are > 1 (e.g. by first adding a count statement, but I'm not sure how to obtain the returned count # from the dialog box)
Is this possible?
While I'm a big fan of Notepad++, this sounds like something I would accomplish with AutoHotKey. You would select the text and copy it to the clipboard. AutoHotKey would read the clipboard, replace the text as you desire, and either replace the clipboard contents, or send it back to your document. Let me know if you would like to go that route.