Who knows how to set vscode to display the number of selected lines? Just like NotePad++, when we select many lines, we can see how many lines selected in the lower right corner, thanks!
Try this extension: Selected Lines Count
Without an extension, you have to resort to a workaround: use the command Add Cursors to Line Ends and observe the selection count. The default shortcut is Shift+Alt+I (i, not L).
Surely, you can find an extension. Till now, you can see in the Status Bar, how many characters you have selected. Take a look, at some extensions here.
Related
I'm using visual studio code and run into a weird problem. I'm not sure how I got here - I could have accidently pressed a shortcut unknowingly.
I'm trying to select a phrase, link or anything that crosses multiple lines (whether the lines are true lines or due to word wrap). When I select multiple lines, it doesn't automatically select the text at the start and end between the two points. Rather, it just selects the length of text for that line and repeats it in the subsequent lines. See the image below to understand.
Image of issue
As you can see, I am trying to select the words from "the" to the end of "sub". Instead of selecting all the words between the two, it selects the text "the instru" and selects every line with the same amount of characters/length.
In order to show what I am expecting, I have pasted the text into Notepad and done the same thing.
What I am expecting
As you can see, all the words between "the" and "sub" are selected.
If anyone has any idea about how to fix this, I would be greatly appreciative.
Below is a copy of the text if the images don't display.
Follow the instructions below for a click guide to retire and/or add 'School'.
Best practice if there is a change in 'School' structure would be to 'retire' any existing school setup that is no longer required and add the new sub school information. The reason why we don't just edit existing school names (typically) is due to leaving historical data intact.
Try using ctrl+shift+P and typing "Toggle Column Selection Mode"
I have an HTML file that has around 700 of my bookmarks. Each line has link and a tag like the following:
<li>Strunk, William, Jr. 1918. The Elements of Style</li>
The file has multiple lines with the same tags. I want to group the lines with the same tag next to each other. I was trying to do it in vscode. I can select multiple occurrences of the same phrase with Ctrl+Shift+L, but I could not select the lines. Is there a way for doing this?
After your comment below that clarified what you are trying to do I think you will find this easier than your solution.
Select the text to check.
Ctrl-Shift-L selects all occurrences. The command is Select All Occurrences of Find Match - if that is bound to something else on your OS, use that.
Ctrl-L will select the entire line. (Changed from Ctrl-i in Feb. 2019.) That is using the command Expand Line Selection - again find that command in your Keyboard Shortcuts and use the same command.
Cut and paste them where you want.
There is also an extension vscode-dup-checker that will find and delete duplicate lines. I don't know if you actually want to delete the duplicates though.
I added a gif to show it in action - it only uses steps 1-4 above:
Ok, I found one method that works. I don't know if it the best though.
After Ctrl+Shift+L, you have cursors on all the lines with that phrase. Then pressing Home will take you to the beginning of all of them and Shift+End then will select all those lines on which you have the cursor. Then cut the text and paste it wherever you wish. Came out to be pretty useful for me while I was editing a html file with 700 links.
I cannot figure out how to do this for the life of me apart from doing a find-replace on 4 spaces and converting to tabs (Version 0.10.2). I can't think of an editor/IDE that doesn't have a specific feature to do this. Does VSCode?
Since fix of: https://github.com/Microsoft/vscode/issues/1228 the editor supports it out of the box. Simply go for:
F1,
indentationToSpaces or indentationToTabs (depending on your need)
Enter.
Another way to do it is click the current indentation (Tab/Spaces:n) on the footer which will open your indentation options where you can select what you want to do.
If you are trying to convert non-leading tabs to spaces (or vice versa) you can use a regex search and replace.
Press CTRL + H
Click the .* button to search using regular expressions.
To search for tabs enter [\t] in Find box.
Enter spaces in Replace box and perform your replace.
Search box in regex mode:
To round out these answers, I will add my take for converting each tab to n spaces.
Highlight a tab character
Use CTRL + F2 select all occurrences
Press SPACE n times
This is the easiest way to do this (going beyond only converting leading tabs).
Note that this does not convert consecutive tabs to k spaces. It converts each tab. For consecutive tabs please see my comment on jrupe's answer. You will need VS Code find and replace with regular expressions to accomplish that.
Select Replace: CTRL-H
Enter Horizontal Tab in Find box: hold ATL and type 009 on the keypad.
Enter a space(or more spaces) into the Replace box: press space bar
Press Enter to begin replacing Tabs with Space(s).
Press F1 and then type into textbox convert indentation to spaces or whatever you want ones
On Visual Studio, Ctrl+K+F did the trick for me.
Fast forward to 2020/2021, there are some extensions that will give us that conversion. I have just needed that functionality (hence I found this article), and searching for extensions I found:
geocode.spacecadet - providing both TAB->SPC and SPC->TAB, but not updated since 2017, with 1.3k installs, 3.5 review
takumii.tabspace - TAB->SPC, from 2020, 1.5k installs, no reviews
pygc.spacetab - SPC->TAB, from... wait, literally yesterday! (or today depending on your TZ), 2 installs, no reviews
I'm trying to use the multi cursor functionality of vscode on a large(ish) file.
the file is too large to select every line individually with ctrl-alt-up or down. In sublime-text I would select everything and push ctrl-shift-l. Is there a similar thing in vscode. I've tried using a regex search for ^, but that gives me an error stating "Expression matches everything".
The command Selection / Add Cursors to Line Ends altshifti will put a cursor on every line in the current selection. (For mac use optshifti)
Tip: You can pull up the keyboard shortcut reference sheet with ctrlk,ctrls (as in, those two keyboard combos in sequence).
(For mac use cmdk,cmds)
Hold Alt+Shift and select the block. Then press End or Right button.
You get selected individual lines.
I use version VSCode 1.5.3 in Windows.
Hold Alt+Shift+i
Hold Home (fn+-> Mac) for right-most or End for left most(fn+<- Mac)
This feature is actually called split selection into lines in many editors.
Sublime Text uses the default keybinding, CTRLSHIFT L
VSCode uses ALTSHIFTI
For Atom you actually need to edit your keymap to something like this
'.platform-win32 .editor, .platform-linux .editor':
'ctrl-shift-L': 'editor:split-selections-into-lines'
Real Lines vs Display Lines
First we have to understand the difference between Real Lines and Display Lines to completely understand the answer of the question.
When Word Wrap is enabled, each line of text that exceeds the width of the window will display as wrapped. As a result, a single line in the file may be represented by multiple lines on the display.
The easiest way to tell the difference between Real Lines and Display Lines is by looking at the line number in the left margin of the text editor. Lines that begin with a number correspond to the real lines, which may span one or more display lines. Each time a line is wrapped to fit inside the window, it begins without a line number.
Cursor At the Beginning of each Display Lines:
Cursor At the Beginning of each Real Lines:
Answer to the Question
Now that we know the difference between Display Lines and Real Lines, we can now properly answer the actual question.
Hold AltShift and select the text block.
Press Home to put cursor on the beginning of every Display Line.
Press End to put cursor on the end of every Display Line.
Press HomeHome (Home twice) to put cursor on the beginning of every Real Line.
Press EndEnd (End twice) to put cursor on the end of every Real Line.
Please understand that AltShiftI put cursor on the end of every Real Line.
Install the extension Sublime Commands.
[Sublime Commands] Adds commands from Sublime Text to VS Code: Transpose, Expand Selection to Line, Split into Lines, Join Lines.
(Don't forget to add the keybinding(s) from the extensions details page to your keybindings.json)
Doesn't VS Code already have a "split into lines" command?
Yes, yes it does. However it differs from the one in Sublime.
In VS Code, when you split into lines your selection gets deselected and a cursor appears at the end of each line that was selected (except for the last line where the cursor appears at the end of the selection).
In Sublime, when you split into lines a cursor appears at the end of each line (with the same exception as in VS Code) and the selection is divided on each line and "given" to the same line.
I have the same problem, i'm used to Alt + drag to do 'box selections' in visual studio but it does'n work in code.
It seems to be impossible for now to do it differently than by selecting every single line.
However plugins should be supported soon so we will likely see a plugin for this if not implemented directly by microsoft.
From visual studio uservoice forums:
We plan to offer plugin support for Visual Studio Code. Thank you for your interests and look for more details in our blog in the coming weeks. http://blogs.msdn.com/b/vscode.
For the preview we are looking for exactly this type of feedback. Keep it coming.
Sean McBreen – VS Code Team Member
Do you know any easy way to find out what is the length of the current selection in Eclipse?
i.e. I select a line fragment and would like to know how many characters are there?
Usually, I count them manually, but that's stupid. When being desperate, I move to the start, check the column number, move to the end, check the column number, subtract, think a minute if I should add 1 or not... and my selection is lost.
On Windows, Notepad++ is a good solution. Open a new tab, copy and paste in there and the length of the document listed at the bottom of the window is the number of characters you have.
Easy way? Copy the text and paste it to a counting script, like this site:
http://charcount.com/
(Warning: the site's background may hurt your eyes.)
Eclipse does support a Selection object, if you're into its API:
http://www.eclipse.org/articles/Article-WorkbenchSelections/article.html#example