Related
We periodically runs jobs and we need to save the output into a PDS and then parse the output to extract parts of it to save into another member. It needs to be done by issuing a REXX command using the percent sign and the REXX member name as an SDSF command line. I've attempted to code a REXX to do this, but it is getting an error when trying to invoke an ISPF service, saying the ISPF environment has not been established. But, this is SDSF running under ISPF.
My code has this in it (copied from several sources and modified):
parse arg PSDSFPARMS "(" PUSERPARMS
parse var PSDSFPARMS PCURRPNL PPRIMPNL PROWTOKEN PPRIMCMD .
PRIMCMD=x2c(PPRIMCMD)
RC = isfquery()
if RC <> 0 then
do
Say "** SDSF environment does not exist, exec ending."
exit 20
end
RC = isfcalls("ON")
Address SDSF "ISFGET" PPRIMPNL "TOKEN('"PROWTOKEN"')" ,
" (" VERBOSE ")"
LRC = RC
if LRC > 0 then
call msgrtn "ISFGET"
if LRC <> 0 then
Exit 20
JOBNAME = value(JNAME.1)
JOBNBR = value(JOBID.1)
SMPDSN = "SMPE.*.OUTPUT.LISTINGS"
LISTC. = ''
SMPODSNS. = ''
SMPODSNS.0 = 0
$ = outtrap('LISTC.')
MSGVAL = msg('ON')
address TSO "LISTC LVL('"SMPDSN"') ALL"
MSGVAL = msg(MSGVAL)
$ = outtrap('OFF')
do LISTCi = 1 to LISTC.0
if word(LISTC.LISTCi,1) = 'NONVSAM' then
do
parse var LISTC.LISTCi . . DSN
SMPODSNS.0 = SMPODSNS.0 + 1
i = SMPODSNS.0
SMPODSNS.i = DSN
end
IX = pos('ENTRY',LISTC.LISTCi)
if IX <> 0 then
do
IX = pos('NOT FOUND',LISTC.LISTCi,IX + 8)
if IX <> 0 then
do
address ISPEXEC "SETMSG MSG(IPLL403E)"
EXITRC = 16
leave
end
end
end
LISTC. = ''
if EXITRC = 16 then
exit 0
address ISPEXEC "TBCREATE SMPDSNS NOWRITE" ,
"NAMES(TSEL TSMPDSN)"
I execute this code by typing %SMPSAVE next to the spool output line on the "H" SDSF panel and it runs fine until it gets to this point in the REXX:
114 *-* address ISPEXEC "TBCREATE SMPDSNS NOWRITE" ,
"NAMES(TSEL TSMPDSN)"
>>> "TBCREATE SMPDSNS NOWRITE NAMES(TSEL TSMPDSN)"
ISPS118S SERVICE NOT INVOKED. A VALID ISPF ENVIRONMENT DOES NOT EXIST.
+++ RC(20) +++
Does anyone know why it says I don't have a valid ISPF environment and how I can get around this?
I've done quite a bit in the past with REXX, including writing REXX code to handle line commands, but this is the first time I've tried to use ISPEXEC commands within this code.
Thank you,
Alan
I have a script setup to run overnight on my Filemaker server, but every night it returns this error:
Schedule "Recheck All Flags" scripting error (201) at "MasterDatabase : Recheck All Flags : ### : Set Field
Where ### is just a random number, probably the line in the script. In the above example let's just say it was 398.
I can't copy and paste the script to here, but it is very simple. It's one big loop over all records in the database and it checks a bunch of If statements. It looks like:
If [MasterDatabase::Start date = ""]
Set Field [MasterDatabase::Flagged for Discrepancy; "Yes"]
Commit Records/Requests [With dialog:Off]
End If
Why might this be failing when running on the server overnight?
Make sure you tell the server to go to the correct layout before the script starts, when the server starts up the script it will do the work on the layout that it is configured for the DB to open by default.
You can do something like:
If [ $$PLATFORM = "Server" ]
(Go to Layout X)
End If
The global variable $$PLATFORM can be defined in your On First Window Open Script like so:
Case (
PatternCount ( Get ( ApplicationVersion ) ; "Server" ) ;
"Server" ;
PatternCount ( Get ( ApplicationVersion ) ; "Data API" ) ;
"Data API" ;
Get ( SystemPlatform ) = 4 ;
"Web" ;
Choose (
Get ( Device ) ;
"Desktop" ; // 0 - Unknown
"Desktop" ; // 1 - Mac
"Desktop" ; // 2 - PC
"Tablet" ; // 3 - Tablet
"Phone" // 4 - Phone
)
)
If you already have that covered then make sure whatever user you are using for the PSOS has access to that layout, records scripts and fields.
In 2018 Roblox switched coding platforms I believe, most scripts have survived, however I have failed to find a working team changer for myself this year that changes your team when clicked depending if you are in certian groups or not. My scripter says that it works in studio, but an error pops up in game that says "
TeamColor is not a valid member of PlayerGui
Stack Begin
Script 'Players.Benyal.PlayerGui.Starter GUI.TeamGui.Frame.Research and Development.LocalScript', Line 8
Stack End"
My scipter tried many different ways but it just wont work! Any seggustions?
This solution uses two scripts (one LocalScript and one Script), follow the steps below to make a team changing GUI!
local teams = game:GetService("Teams")
local settings = {
["GUIHeight"] = 30, --put in a number over 20, or 100 if you want it to fill the screen
["GUIWidth"] = 40, --put in a number over 20, or 100 if you want it to fill the screen
["GUIColor"] = Color3.fromRGB(240,240,240), --color of the team changer gui
["TitleText"] = "Team Changer", --title text in the gui
["TitleFont"] = "ArialBold", --font of title
}
repeat wait() until game.Players.LocalPlayer and game.Players.LocalPlayer.PlayerGui
local plr = game.Players.LocalPlayer
local teamGUI = Instance.new("ScreenGui",plr.PlayerGui)
local frame = Instance.new("Frame",teamGUI)
frame.AnchorPoint,frame.Size,frame.Position,frame.BackgroundColor3 = Vector2.new(0.5,0.5),UDim2.new(settings.GUIWidth/100,0,settings.GUIHeight/100,0),UDim2.new(0.5,0,0.5,0),settings.GUIColor
local title = Instance.new("TextLabel",frame)
title.Text,title.Font,title.Size,title.TextScaled,title.BackgroundTransparency = settings.TitleText,settings.TitleFont,UDim2.new(1,0,0.15,0),true,0.5
local closebutton = Instance.new("TextButton",title)
closebutton.Size,closebutton.Position,closebutton.BackgroundColor3,closebutton.Text = UDim2.new(0.1,0,1,0),UDim2.new(0.9,0,0,0),Color3.fromRGB(255,155,155),"Close"
local list = Instance.new("ScrollingFrame",frame)
list.Size,list.Position,list.BackgroundTransparency = UDim2.new(1,0,0.85,0),UDim2.new(0,0,0.15,0),1
local UILayout = Instance.new("UIListLayout",list)
local serverTeamHandler = game.ReplicatedStorage:WaitForChild("teamChanger")
local getTeams = teams:GetChildren() --this part checks if you have teams in your game (you need to have put the teams in your game already)
for i,v in pairs(getTeams) do
print("[Team " .. i .. " found]: " .. v:GetFullName())
local teamButton = Instance.new("TextButton",list)
teamButton.BackgroundColor3 = v.TeamColor.Color
teamButton.Size = UDim2.new(1,0,0,40)
teamButton.Text,teamButton.TextColor3,teamButton.TextStrokeTransparency,teamButton.TextScaled = v.Name,Color3.fromRGB(255,255,255),0.7,true
teamButton.MouseButton1Down:connect(function()
print("You changed teams. You are now in: " .. v.Name)
serverTeamHandler:InvokeServer(v)
end)
end
closebutton.MouseButton1Click:connect(function()
frame:TweenPosition(UDim2.new(0.5,0,2,0),"Out","Quad",0.5)
local returnButton = Instance.new("TextButton",teamGUI)
returnButton.Size,returnButton.Position,returnButton.Text,returnButton.TextScaled = UDim2.new(0,200,0,50),UDim2.new(0.5,-100,1,-50),"Open Team Changer",true
returnButton.MouseButton1Down:connect(function()
returnButton:Destroy()
frame:TweenPosition(UDim2.new(0.5,0,0.5,0),"Out","Elastic",1,true)
end)
end)
Step 1 Insert a LocalScript into StarterGui
Step 2 Copy the stuff above and paste it into this LocalScript
Step 3 Insert a Script into either Workspace or ServerScriptService (your choice)
Step 4 Copy the stuff below and paste it into the Script
local teamChanger = Instance.new("RemoteFunction",game.ReplicatedStorage)
teamChanger.Name = "teamChanger"
local function changeTeam(client,team)
print(client.Name .. "changed teams: now in" .. team.Name)
client.Team = team
end
teamChanger.OnServerInvoke = changeTeam
If you followed these steps correctly, you should now have a working team changing GUI in your game! It works as long as you have already inserted Teams in your game. The first few lines in the LocalScript can also be customized as well!
I have a series of data, for example:
0.767838478
0.702426493
0.733858228
0.703275979
0.651456058
0.62427187
0.742353261
0.646359026
0.695630431
0.659101665
0.598786652
0.592840135
0.59199059
which I know fits best to an equation of the form:
y=ae^(b*x)+c
How can I fit the custom function to this data?
Similar question had been already asked on LibreOffice forum without a proper answer. I would appreciate if you could help me know how to do this. Preferably answers applying to any custom function rather than workarounds to this specific case.
There are multiple possible solutions for this. But one approach would be the following:
For determining the aand b in the trend line function y = a*e^(b*x) there are solutions using native Calc functions (LINEST, EXP, LN).
So we could the y = a*e^(b*x)+c taking as y-c= a*e^(b*x) and so if we are knowing c, the solution for y = a*e^(b*x) could be taken too. How to know c? One approach is described in Exponential Curve Fitting. There approximation of b, a and then c are made.
I have the main part of the delphi code from Exponential Curve Fitting : source listing translated to StarBasic for Calc. The part of the fine tuning of c is not translated until now. To-Do for you as professional and enthusiast programmers.
Example:
Data:
x y
0 0.767838478
1 0.702426493
2 0.733858228
3 0.703275979
4 0.651456058
5 0.62427187
6 0.742353261
7 0.646359026
8 0.695630431
9 0.659101665
10 0.598786652
11 0.592840135
12 0.59199059
Formulas:
B17: =EXP(INDEX(LINEST(LN($B$2:$B$14),$A$2:$A$14),1,2))
C17: =INDEX(LINEST(LN($B$2:$B$14),$A$2:$A$14),1,1)
y = a*e^(b*x) is also the function used for the chart's trend line calculation.
B19: =INDEX(TRENDEXPPLUSC($B$2:$B$14,$A$2:$A$14),1,1)
C19: =INDEX(TRENDEXPPLUSC($B$2:$B$14,$A$2:$A$14),1,2)
D19: =INDEX(TRENDEXPPLUSC($B$2:$B$14,$A$2:$A$14),1,3)
Code:
function trendExpPlusC(rangey as variant, rangex as variant) as variant
'get values from ranges
redim x(ubound(rangex)-1) as double
redim y(ubound(rangex)-1) as double
for i = lbound(x) to ubound(x)
x(i) = rangex(i+1,1)
y(i) = rangey(i+1,1)
next
'make helper arrays
redim dx(ubound(x)-1) as double
redim dy(ubound(x)-1) as double
redim dxyx(ubound(x)-1) as double
redim dxyy(ubound(x)-1) as double
for i = lbound(x) to ubound(x)-1
dx(i) = x(i+1) - x(i)
dy(i) = y(i+1) - y(i)
dxyx(i) = (x(i+1) + x(i))/2
dxyy(i) = dy(i) / dx(i)
next
'approximate b
s = 0
errcnt = 0
for i = lbound(dxyx) to ubound(dxyx)-1
on error goto errorhandler
s = s + log(abs(dxyy(i+1) / dxyy(i))) / (dxyx(i+1) - dxyx(i))
on error goto 0
next
b = s / (ubound(dxyx) - errcnt)
'approximate a
s = 0
errcnt = 0
for i = lbound(dx) to ubound(dx)
on error goto errorhandler
s = s + dy(i) / (exp(b * x(i+1)) - exp(b * x(i)))
on error goto 0
next
a = s / (ubound(dx) + 1 - errcnt)
'approximate c
s = 0
errcnt = 0
for i = lbound(x) to ubound(x)
on error goto errorhandler
s = s + y(i) - a * exp(b * x(i))
on error goto 0
next
c = s / (ubound(x) + 1 - errcnt)
'make y for (y - c) = a*e^(b*x)
for i = lbound(x) to ubound(x)
y(i) = log(abs(y(i) - c))
next
'get a and b from LINEST for (y - c) = a*e^(b*x)
oFunctionAccess = createUnoService( "com.sun.star.sheet.FunctionAccess" )
args = array(array(y), array(x))
ab = oFunctionAccess.CallFunction("LINEST", args)
if a < 0 then a = -exp(ab(0)(1)) else a = exp(ab(0)(1))
b = ab(0)(0)
trendExpPlusC = array(a, b, c)
exit function
errorhandler:
errcnt = errcnt + 1
resume next
end function
The formula y = beax is the exponential regression equation for LibreOffice chart trend lines.
LibreOffice exports all settings
All the settings of LibreOffice, all in the LibreOffice folder.
C:\Users\a←When installing the operating system, the name
entered.\AppData←File Manager ~ "Hidden project" to open, the AppData
folder will be displayed.\Roaming\LibreOffice
Back up the LibreOffice folder, when reinstalling, put the LibreOffice folder in its original place.
Note:
1. If the installation is preview edition, because the name of preview edition is LibreOfficeDev, so the LibreOfficeDev folder will be
displayed.
2. Formal edition can be installed together with preview edition, if both formal edition and preview edition are installed, LibreOffice
folder and LibreOfficeDev folder will be displayed.
3. To clear all settings, just delete the LibreOffice folder, then open the program, a new LibreOffice folder will be created.
LibreOffice exports a single toolbar I made
Common path
C:\Users\a←When installing the operating system, the name
entered.\AppData←File Manager ~ "Hidden project" to open, the AppData
folder will be
displayed.\Roaming\LibreOffice\4\user\config\soffice.cfg\modules\Please
connect the branch path of the individual software below.
Branch path
\modules\StartModule\toolbar\The "Start" toolbar I made is placed here.
\modules\swriter\toolbar\The "writer" toolbar I made is placed here.
\modules\scalc\toolbar\The "calc" toolbar I made is placed here.
\modules\simpress\toolbar\The "impress" toolbar I made is placed here.
\modules\sdraw\toolbar\The "draw" toolbar I made is placed here.
\modules\smath\toolbar\The "math" toolbar I made is placed here.
\modules\dbapp\toolbar\The "base" toolbar I made is placed here.
Backup file, when reinstalling, put the file in the original place.
Note:
Because of the toolbar that I made myself, default file name, will automatically use Numbering, so to open the file, can know the name of
the toolbar.
The front file name "custom_toolbar_" cannot be changed, change will cause error, behind's file name can be changed. For example:
custom_toolbar_c01611ed.xml→custom_toolbar_AAA.xml.
Do well of toolbar, can be copied to other places to use. For example: In the "writer" Do well of toolbar, can be copied to "calc"
places to use.
LibreOffice self-made symbol toolbar
Step 1 Start "Recording Macros function" Tools\Options\Advanced\Enable macro recording（Tick）, in the
"Tools\Macros", the "Record Macro" option will appear.
Step 2 Recording Macros Tools\Macros\Record Macro→Recording action (click "Ω" to enter symbol→select symbol→Insert)→Stop
Recording→The name Macros stored in "Module1" is Main→Modify Main
name→Save.
Step 3 Add item new toolbar Tools\Customize\Toolbar→Add→Enter a name (example: symbol)→OK, the new toolbar will appear in the top
left.
Step 4 Will Macros Add item new toolbar Tools\Customize\Toolbar\Category\Macros\My
Macros\Standard\Module1\Main→Click "Main"→Add item→Modify→Rename (can
be named with symbol)→OK→OK.
I would like to have one error log file for each of my pool. However, all errors are always logged to /var/php5-fpm/error.log which is my global error log file defined in php-fpm.conf. Here is the log configuration of my pool.
php_flag[display_errors] = on
php_admin_value[error_log] = /var/log/php5-fpm/$pool.error.log
php_admin_flag[log_errors] = true
I also tried to set catch_workers_output to yes without success. I also tried to directly add error_log to my pool configuration file but that doesn't work (php-fpm refuse to start because this option is invalid). It is the same for error.log (inspired by access.log.
OS: Debian7
PHP version:
PHP 5.4.36-0+deb7u1 (fpm-fcgi) (built: Dec 31 2014 07:33:17)
Copyright (c) 1997-2014 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2014 Zend Technologies
Do you have an idea on how to solve that?
EDIT 1: Add /etc/php5/fpm/php-fpm.conf and /etc/php5/fpm/pool.d/piwik.conf
php-fpm.conf
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;
; All relative paths in this configuration file are relative to PHP's install
; prefix (/usr). This prefix can be dynamically changed by using the
; '-p' argument from the command line.
; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
; - the global prefix if it's been set (-p argument)
; - /usr otherwise
;include=/etc/php5/fpm/*.conf
;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;
[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
pid = /var/run/php5-fpm.pid
; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Note: the default prefix is /var
; Default Value: log/php-fpm.log
error_log = /var/log/php5-fpm/error.log
; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon
; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm
; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice
; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0
; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated. This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0
; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0
; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128
; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
; - The pool process will inherit the master process priority
; unless it specified otherwise
; Default Value: no set
; process.priority = -19
; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes
; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024
; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
; Specify the event mechanism FPM will use. The following is available:
; - select (any POSIX os)
; - poll (any POSIX os)
; - epoll (linux >= 2.5.44)
; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll (Solaris >= 7)
; - port (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll
; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10
;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;
; Multiple pools of child processes may be started with different listening
; ports and different management options. The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)
; To configure the pools it is recommended to have one .conf file per
; pool in the following directory:
include=/etc/php5/fpm/pool.d/*.conf
piwik.conf
; Start a new pool named 'www'.
; the variable $pool can we used in any directive and will be replaced by the
; pool name ('www' here)
[piwik]
; Per pool prefix
; It only applies on the following directives:
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool
; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
; will be used.
user = www-data
group = www-data
; The address on which to accept FastCGI requests.
; Valid syntaxes are:
; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
; a specific port;
; 'port' - to listen on a TCP socket to all addresses on a
; specific port;
; '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /var/run/php5-fpm-piwik.sock
; Set listen(2) backlog.
; Default Value: 128 (-1 on FreeBSD and OpenBSD)
;listen.backlog = 128
; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
; mode is set to 0660
listen.owner = www-data
listen.group = www-data
;listen.mode = 0660
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1
; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
; - The pool processes will inherit the master process priority
; unless it specified otherwise
; Default Value: no set
; process.priority = -19
; Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives. With this process management, there will be
; always at least 1 children.
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; ondemand - no children are created at startup. Children will be forked when
; new requests will connect. The following parameter are used:
; pm.max_children - the maximum number of children that
; can be alive at the same time.
; pm.process_idle_timeout - The number of seconds after which
; an idle process will be killed.
; Note: This value is mandatory.
pm = ondemand
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 10
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 2
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 4
; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
pm.max_requests = 500
; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following informations:
; pool - the name of the pool;
; process manager - static, dynamic or ondemand;
; start time - the date and time FPM has started;
; start since - number of seconds since FPM has started;
; accepted conn - the number of request accepted by the pool;
; listen queue - the number of request in the queue of pending
; connections (see backlog in listen(2));
; max listen queue - the maximum number of requests in the queue
; of pending connections since FPM has started;
; listen queue len - the size of the socket queue of pending connections;
; idle processes - the number of idle processes;
; active processes - the number of active processes;
; total processes - the number of idle + active processes;
; max active processes - the maximum number of active processes since FPM
; has started;
; max children reached - number of times, the process limit has been reached,
; when pm tries to start more children (works only for
; pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
; pool: www
; process manager: static
; start time: 01/Jul/2011:17:53:49 +0200
; start since: 62636
; accepted conn: 190460
; listen queue: 0
; max listen queue: 1
; listen queue len: 42
; idle processes: 4
; active processes: 11
; total processes: 15
; max active processes: 12
; max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
; http://www.foo.bar/status
; http://www.foo.bar/status?json
; http://www.foo.bar/status?html
; http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example:
; http://www.foo.bar/status?full
; http://www.foo.bar/status?json&full
; http://www.foo.bar/status?html&full
; http://www.foo.bar/status?xml&full
; The Full status returns for each process:
; pid - the PID of the process;
; state - the state of the process (Idle, Running, ...);
; start time - the date and time the process has started;
; start since - the number of seconds since the process has started;
; requests - the number of requests the process has served;
; request duration - the duration in µs of the requests;
; request method - the request method (GET, POST, ...);
; request URI - the request URI with the query string;
; content length - the content length of the request (only with POST);
; user - the user (PHP_AUTH_USER) (or '-' if not set);
; script - the main script called (or '-' if not set);
; last request cpu - the %cpu the last request consumed
; it's always 0 if the process is not in Idle state
; because CPU calculation is done when the request
; processing has terminated;
; last request memory - the max amount of memory the last request consumed
; it's always 0 if the process is not in Idle state
; because memory calculation is done when the request
; processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
; ************************
; pid: 31330
; state: Running
; start time: 01/Jul/2011:17:53:49 +0200
; start since: 63087
; requests: 12808
; request duration: 1250261
; request method: GET
; request URI: /test_mem.php?N=10000
; content length: 0
; user: -
; script: /home/fat/web/docs/php/test_mem.php
; last request cpu: 0.00
; last request memory: 0
;
; Note: There is a real-time FPM status monitoring sample web page available
; It's available in: ${prefix}/share/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong
; The access log file
; Default: not set
;access.log = /var/log/php5-fpm/$pool.access.log
; The access log format.
; The following syntax is allowed
; %%: the '%' character
; %C: %CPU used by the request
; it can accept the following format:
; - %{user}C for user CPU only
; - %{system}C for system CPU only
; - %{total}C for user + system CPU (default)
; %d: time taken to serve the request
; it can accept the following format:
; - %{seconds}d (default)
; - %{miliseconds}d
; - %{mili}d
; - %{microseconds}d
; - %{micro}d
; %e: an environment variable (same as $_ENV or $_SERVER)
; it must be associated with embraces to specify the name of the env
; variable. Some exemples:
; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
; %f: script filename
; %l: content-length of the request (for POST request only)
; %m: request method
; %M: peak of memory allocated by PHP
; it can accept the following format:
; - %{bytes}M (default)
; - %{kilobytes}M
; - %{kilo}M
; - %{megabytes}M
; - %{mega}M
; %n: pool name
; %o: output header
; it must be associated with embraces to specify the name of the header:
; - %{Content-Type}o
; - %{X-Powered-By}o
; - %{Transfert-Encoding}o
; - ....
; %p: PID of the child that serviced the request
; %P: PID of the parent of the child that serviced the request
; %q: the query string
; %Q: the '?' character if query string exists
; %r: the request URI (without the query string, see %q and %Q)
; %R: remote IP address
; %s: status (response code)
; %t: server time the request was received
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %T: time the log has been written (the request has finished)
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/$pool.log.slow
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
; possible. However, all PHP paths will be relative to the chroot
; (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =
; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
chdir = /
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes
; Clear environment in FPM workers
; Prevents arbitrary environment variables from reaching FPM worker processes
; by clearing the environment in workers before env vars specified in this
; pool configuration are added.
; Setting to "no" will make all environment variables available to PHP code
; via getenv(), $_ENV and $_SERVER.
; Default Value: yes
;clear_env = no
; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
; php_value/php_flag - you can set classic ini defines which can
; be overwritten from PHP call 'ini_set'.
; php_admin_value/php_admin_flag - these directives won't be overwritten by
; PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.
; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr)
; Default Value: nothing is defined by default except the values in php.ini and
; specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www#my.domain.com
;php_flag[display_errors] = off
php_admin_value[error_log] = /var/log/php5-fpm/$pool.error.log
php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
Edit 2: add a link to my configuration
My configuration is here: https://gist.github.com/Jenselme/091a4abf4903d392d6c0. If you need more information or more file, please ask.
In each of your pool configurations you can set the options at the very bottom of that file
php_admin_flag[display_errors] = off
php_admin_flag[log_errors] = on
php_admin_value[error_log] = /vhosts/example.com/logs/php_error.log
I tossed display_errors in there because you didn't mention if this was a production machine or not. Certainly disable them if this is true.
I also have catch_workers_output commented out in my php-fpm.conf main configuration so that would define by default catch_workers_output = no
Each of my VirtualHosts have their own pool configuration and this is what I use that works very well.
Edit 1
Based on your updated information a few things catch my eye:
In your main PHP-FPM Configuration change:
;log_level = notice
to
log_level = notice
In your PHP-FPM Pool Configuration change:
chdir = /
php_admin_value[error_log] = /var/log/php5-fpm/$pool.error.log
to
;chdir = /
php_admin_value[error_log] = /var/log/php5-fpm/piwik.error.log
Don't forget to restart PHP-FPM after making any changes too.
Edit 2
I'll keep this link available forever, perhaps it will help others too. Here is a Full Nginx + PHP-FPM Configuration
Edit 3
Comparing your configurations with mine I only found a few things different and I'll outline those here:
Your fastcgi_params is slightly different than my fastcgi.conf file
In my nginx.conf I don't actually define a log path like you do
In your php-fpm.conf I have syslog.facility = daemon and syslog.ident = php-fpm set where-as in your config they are currently disabled
In your pool.conf there are a few options here I have different:
Yours: ;listen.mode = 0660
Mine: listen.mode = 0666
Yours: ;listen.backlog = 128
Mine: listen.backlog = 65535
One other thing in your pool.conf also caught my eye and that is the path to your actual error_log: php_admin_value[error_log] = /var/log/php5-fpm/piwik.error.log
I looked at your other configurations and noticed at no time do you reference /var/log/php5-fpm anywhere, instead It's normally /var/log/nginx/
Hope my answer will save someone a day of googling.
- Make sure you have the correct permissions of the folder your logs reside.
- Also make sure the user your pool runs as has the rights to write into the log file you specified in the settings of the pool.
Credits go to the user frozen_twilight from this thread:
https://www.linux.org.ru/forum/admin/9598568?lastmod=1440115408848#comment-9600057
P.S.
In my case php-fpm pool process has been unable to write to the log dir and into the file due to the changed defaults in the php 5.6.
I had stopped the php-fpm service before trying to update php. During the update my php-fpm.conf has got renamed and the new one (with new defaults) has been installed, so the first run the updated php-fpm pool has started as php-fpm user and not as apache, as it had been set up before the update.