I'm trying to count how many subway stations each zip code in NYC has. I have the longitudes and latitudes of each station but am wondering how I can relate this to zip codes? Thank you for your help!
Subway Stations on default map
You'll need some spatial data source that contains the boundaries of each zip code, such as a ESRI shapefile, GeoJSON file, KML etc. Tableau's built-in geocoding can display zip code boundaries visually, but they are not accessible for computation (unless you find a way to hack the geocoding files that ship with Tableau)
It should not be hard to find a shapefile of zip code boundaries for NYC.
Once you have that use a spatial join with the INTERSECTS operator to combine the zip code boundary data with your subway station data. If your station data is not in a spatial format, you'll need to use the MAKEPOINT() function in Tableau to convert the latitude and longitude coordinates into a spatial geometry datatype that can be used to specify your join condition.
This sounds like more work that it really is. In the end, the INTERSECTS operator will do all the work to assign each station to the correct zip code.
Related
I have a high volume dataset with keys like this:
lat:6.897585,
long:52.785805,
speed:12,
bearing:144
Basically it is a dataset of records of various trips on cars. The data was stored every few seconds during each trip. The main goal of this project is to be able to visualize only u-turns (turn arounds) on a map. But for now, I am trying to at least show the data on specifc roads. For that, I am using Overpass API
With the help of Overpass Turbo, I can get a dataset with all the roads I need.
However, in the dataset, the road's geometry is represented with LineString type.
My question is, How can I get a bounding box(es) of the roads from Overpass API, so later on, I can display events that happened only on the given roads? Or maybe you have a better solution on how to achieve this?
A bounding box wouldn't be very helpful here, as using it to filter your points would show everything that falls within the box (which could include other nearby roads)
It sounds like getting a buffer around a linestring might get you closer, but could still include points that are within the buffer but not on the road you are inspecting.
The smarter way to do this would be to assign each event to a road segment using some logic based on their attributes/properties, so you don't have to depend on a spatial filter.
I'm new to OSM and would like to know if my approach for finding the next intersection ahead is possible when doing it offline.
The goal is to get the coordinates (latitude/longitude) of the next intersection on the street I'm currently driving on. For that I have my actual position (lat/lon coordinates) and heading (w.r.t. the north-pole) at disposition.
My current approach right now is to first use my coordinates for getting the name of the street/way/trace in which I am driving; then use that name for knowing which are the next intersections on that street (to both sides); and then use the heading for knowing which direction is the one I should pay attention to.
Once I have the intersection, I would get its coordinates and continue with the program.
My questions are then, is it possible to do all of that offline, i.e. with a .osm file (or similar)?
And, do you know a better approach for getting the coordinates of the next intersection ahead?
Thanks a lot in advance!
PS. I was able to get the name of the street by using nominatim and to get all the intersections of a street by using Overpass turbo, but this solutions would need internet; or is there a way of using them offline?
Using OSRM API, I found the coordinates of the intersections along a route.
I want to know what are the corresponding node IDs.
Is there any API to find the node IDS from the coordinate points?
Is there any API to find the node IDS from the coordinate points?
Yes. You need to pass annotations=nodes as additional query parameter. routes[i].legs[j].annotations.nodes will be an array of OSM IDs that you can use to link the data with OSM.
Linking this to the coordinates in the step is a little bit complicated: You would need to concatenate all RouteStep.geometry and remove the duplicated coordinates (steps[i].geometry[-1] == steps[i+1].geometry[0]).
I need a framework which takes a set of latitude longitude points and plots on a world map, grouped by country having the count of points as a marker on each country. Grouping here is the count of latitude longitude points in a country.
And as I drill down into a country, the clustering should change to state based one. And the next level, to districts.
Leaflet marker cluster is something very similar to what I have asked for, but the grouping is based on proximity and it doesn't consider country or state boundaries. That is, they are not region aware.
Regionbound.com has tweaked in some code in the leaflet code for making it region aware,
Sample marker definition:
var marker1 = new L.marker([-37.8, 145], {regions: ["Asia-Pac", "Australia", "VIC", "Melbourne"]} );
But the sample code says, every latitude longitude must be defined along with some extra parameter containing place information.
I could get the place information using reverse geocoding, but reverse geocoding every latitude longitude is time consuming right.
Highmaps provided by Highcharts is one another solution, but there, every country has code which should be assigned a value[count of point coordinates belonging to that country].
But all I have is latitude longitude points, no country or state information.
Thus, I need something which takes only a set of latitude longitude and does clustering based on country, state, district depending on the zoom level.
You have 2 separate needs in your questions:
Map your lat/lng coordinates to appropriate administrative areas. E.g. through the reverse geocoding that you mention.
Display "clusters" on those administrative areas depending on zoom level.
As for point 1, you know that lat/lng points do not say by themselves which administrative area(s) they belong to. So "reverse geocoding every latitude longitude" is a mandatory step. Whether time consuming or not depends on the solution you choose to perform this operation.
If I understand correctly, you would like a "framework" that could do that automatically for you. But frameworks are usually data agnostic, and if they do not have data about boundaries of those administrative areas, they cannot help you.
You may rather look for "services" (like the Mapbox Geocoding API that you mention) or software that would already have such data. It is not time consuming if you can program the lookup (or perform "bulk" operations) and if you are not limited by the requests rate and your amount of points to map (which may be the case with Mapbox).
You could very well set up your own application to perform this mapping:
As for the dataset for administrative areas boundaries, you would probably be interested in links in this post: Are there any free administrative boundaries available as shapefiles? If your points are limited to a few countries, it will be easier for you to find the appropriate data source(s).
Once you have that data, many GIS software should be capable of mapping your lat/lng points to the areas they belong to. This would be mainly for a "one-shot" operation, if your set of points do not change much.
A "web-compatible" alternative would be for example to use Leaflet with point in polygon for Leaflet plugin. You would need your boundaries data converted to GeoJSON format first. Again, GIS software should be capable of doing so, or many online services as well (search for "convert geojson" for example).
A server-side solution would avoid having to manage the entire boundaries data through network and in client browser (if you need to perform the mapping dynamically). I am sure many GIS servers are capable of performing this operation, once they are fed with the boundaries data.
For point 2, once you have completed the above step, I think you would have many options available, including those you mention (RegionBound, Highmaps).
Even with standard mapping libraries (Leaflet, OpenLayers 3), you would just need to build your "clusters" (markers on administrative areas with a number saying how many points are in there), like you have to do with Highmaps anyway for example.
Computing the number of "clustered" point is as easy as filtering your points per area name / code. Then switch the clusters to the desired administrative level when the map zoom changes.
So the key is really to determine first to which areas your points belong to (point 1).
Then a small question would rise about where to place the "cluster" marker:
On centroid of the administrative area? You need the coordinates of that centroid from your data source, or a good algorithm to compute it from the boundaries (good luck on that…).
On "center" of the bounding box of the area? Leaflet can easily compute that: from your area vector shape, you would do myShape.getBounds().getCenter().
On barycentre / centroid of the clustered points? This is what Leaflet.markercluster and RegionBound do (do not know for Highmaps).
Good luck!
I would like to add placemarks to parts of collada geometry in google earth. To do this I need to translate the geometry coordinates in the xml to match the transformation to the model in google earth. Given longitude latitude and orientation how do I translate geometry coordinate to match the google earth transformation?
I believe models are located on the earth using only 1 coordinate which is used to position the 'center' of the model. How that is determined I am not sure, and might even depend on the kind/shape of the model.
The coordinate is easily found in the kml structure for the model which is referenced here
http://code.google.com/apis/kml/documentation/models.html
Determining how far a certain part of your geometry is from the middle might be very complex but here is an example of some code that will provide you the distance between two points.
http://earth-api-utility-library.googlecode.com/svn/trunk/extensions/examples/ruler.html
It is based upon the google earth extensions (gex) library
http://code.google.com/p/earth-api-utility-library/
Perhaps you could use SketchUp to help determine the location of your points of interest within the geometry?
http://sketchup.google.com/