I am using Listary (which is a comfortable explorer integration) and I want to be able to start an instance of "Windows Terminal" in the current directory. My Listary command is configured, so that it starts the application under the path
C:\Users\%user%\AppData\Local\Microsoft\WindowsApps\wt.exe.
Unfortunately I couldn't find out yet a way to pass a target directory to Windows Terminal as a parameter. It refuses to take any paths and always starts at the %userprofile% directory. Is there a way to accomplish this behaviour?
I have found the solution, after reading this article:
https://devblogs.microsoft.com/commandline/windows-terminal-preview-v0-9-release/
In short, you have just to type "-d ." into the "Parameter" field of Listary's custom command. "." refers to the current directory.
Related
I have multiple versions of vscode installed on my system with portable mode. I start each of them via a desktop shortcut. Since they are in portable mode, their installation directories are not in the default PATH variable.
When I make a new powershell terminal window, the portable vscode directory is not on the path. I need the command "code" in the terminal window to run the same vscode version that the terminal shell is running in. In other words, if I am running a portable vscode, and I open a powershell terminal and type the command "code", I want it to run the code.exe file that is the same as the vscode I am running it in, and not a different one, and not get the "object not found" message. For various reasons I do not want to have to type the full path.
So, in essence, I want to add a directory to the path variable when vscode starts up, with that directory being the base directory of the vscode itself.
You need to set this in: File/Preferences/Settings then select Workspace, there go to: Terminal/Integrated:Cmd and there specify An explicit start path where the terminal will be launched.
Flutter path is correct but still unable to be recognized by the windows command prompt. Looked everywhere asked anyone who used flutter still unable to figure out the problem.
Tried suggestions made on other questions similar to this still no luck and followed the tutorials on installing flutter did not work.
For Windows users (Windows 10)
Open Start menu and type env
Click on Environment Variables..
under User variables, select Path then click Edit
Click New then past this line C:\src\flutter\bin(supposing this is where 'bin' directory of Flutter is located on your machine)
Click 'OK'.
Restart is required to apply changes.
The command prompt you're using appears to be using elevated permissions and therefore will have the "system" environment variables but not your user ones necessarily. Try with a non-elevated command prompt... which you should be using anyways. Only use an elevated command prompt when absolutely needed as otherwise you could delete important things by accident. Also, you can run echo %PATH% to see what is actually in the path in the command prompt you're using.
If you want to use flutter across multiple users or need to use an elevated command prompt for some reason, add the path to flutter/bin to the system environment variables instead.
Adding the following things in the path solved the issue for me
C:\Program Files\Git\bin
C:\Program Files\Git\cmd
C:\Windows\System32
C:\Windows\SysWOW64\WindowsPowerShell\v1.0
C:\src\flutter\bin
For windows user make sure to include C:\Windows\System32 in your user PATH variable,this prevents the flutter command prompt from flashing when you click it.
Consider:
I just started with Angular. I installed angular/cli and added a project.
Now I want to use Visual Studio Code.
I open the Command Palette (Ctrl + Shift + P) and type 'shell command' to find the shell command: Install 'code' command in PATH command.
But I get this message
"No commands matching"
Why does it not exist?
With Windows it is installed by default so you don't need to add path. Just run " code . " in cmd and it will work fine
If in Visual Studio Code doesn't appear that option and the installation didn't add to the path directly, you can add the Visual Studio Code bin folder manually to the path and it starts to work.
Go to the Enviroment Variables and edit the Path user variable.
Inside of it, add a new variable with the current bin path of your Visual Studio Code installation.
Mine, for example, is "C:\Users\Inazio\AppData\Local\Programs\Microsoft VS Code\bin"
After that, you can start to use the code command in your OS
I had this same problem. Long story short, I uninstalled VS Code, re-downloaded the installer package and ran that. Sure enough, one of the install screens has a checkbox option to add to the PATH variable and this option is unchecked by default.
Checked the box, finished the install, works fine.
Of course it's perfectly valid to modify the PATH variable after install, but I think it's important to clarify that (at least version 1.23.0) does not update PATH by default. Most of the threads I looked at says it does.
I fixed this just adding "C:\Users\myUser\AppData\Local\Programs\Microsoft VS Code\Code.exe" (where myUser is your windows user) without "" to system path.
same effect than " Shell Command: Install ‘code’ command in PATH ".
This works for me
For Windows users
Open Environment Variables
System > Advance system settings > Advanced tab > environment variables on system variables click on Path and click Edit and add new Path named
"C:\Users\Your-Username\AppData\Local\Programs\Microsoft VS Code\bin"
For window users follow steps below and add new Path, after doing so restart your terminal you will get code command on your terminal
If you already have Visual Code into Windows path and in a terminal you put "code ." and Visual Code starts, what happens is that the command "code" is not linked to the path in wsl2.
All you have to do is run the following command changing your user:
sudo ln -s /mnt/c/Users/CHANGE_USER/AppData/Local/Programs/Microsoft
VS\ Code/bin/code /usr/bin/code
This works on Ubuntu and Debian.
it is already installed on Windows. You just have to make cmd path where the project created (e.g C:\WINDOWS\system32> cd C:\WINDOWS\system32\hello-world), then run the the comamnd "code ." like this (C:\Windows\System32\hello-world>code .)
I got this from VS Code documentation
the path has been set automatically when installing VS.But i noticed a difference between "code." and "code ." Can you see the difference? The second has space in between the code and the dot. Try that.
I was having the same exact problem and when i checked my PATH variable it said that the path was something\something\Microsoft VS Code . then i remembered my folder's name was Visual Studio Code.After I renamed it back everything works.
Go to Extensions and install Shell. On newer versions you can just type in Code . in CMD and it will pop-up.
Just open your command prompt and type:
cd hello-world
hello-world is the project name don't forget to change it then click (enter) and type
code .
Visual Code already have internal terminal window
Use the Ctrl+` keyboard shortcut with the backtick character.
Its supports all Ubuntu terminal commands
I have followed the directions on PhoneGap's website and installed PhoneGap using the command prompt on Windows. However, after it has installed I try to run the command 'phonegap' and I get an error saying that 'phonegap' is not recognized as an internal or external command, operable program or batch file. How do I fix this? Thanks.
You might need to add phonegap to your classpath variable, in order to let the prompt know where the phonegap .exe file is located.
Try writing the full path of the exe file, if that runs, then what I mentioned above should solve your problem.
EDIT
Just looked at the install page at phonegap.com (http://phonegap.com/install/). Very scarce on the information I would say.. But I still recommend investigating the above.
The Problem with enthronement variable for default path of your your current user. Follow the steps.
Click the Start menu and type "regedit" on the search box. This will launch the Windows Registry Editor program.
Enter to the following Registry entry: HKEY_CURRENT_USER\Software\Microsoft\Windows Script Host\Settings
Select the "Enabled" entry in the right side window. If this entry is there, right-click and select "New" followed by "DWORD Value." Name the value "Enabled."
Right-click the "Enabled" entry and click "Modify."
Change the number in the "Value" box to "1." This will re-enable WSH.
close all opened cmd windows and open a new window.
Just try to run CMD as administrator. Hopefully that will solve your problem. This solved mine.
Even though this is a very old question, I'm going to post a solution that worked for me on Windows Vista/7/8. The problem is that by default the command prompt in which the npm command is run is not elevated. So launch a command prompt as administrator and then run npm command. If it is not elevated then the environment variables wont be set properly.
In windows 7 platform, when the latest version of phonegap (3.4) installed it hosts in path like this:
C:\Users\\AppData\Roaming\npm
Sometimes you should add this address to the PATH environment manually.
Go to System Properties-> Advanced -> Environment Variables
Select PATH variable from list and then edit it
I'm having a very weird issue with the command line and running Ant. I point the path variable at the location of my Ant bin directory (C:\Ant\bin) and when i go into a command window and type PATH it shows the location in it. But when I go to run Ant by typing "ant" it does nothing and states that it isn't recognized. But when I go to the run window (Windows+R) and type "ant" it runs it.
I have restarted Windows twice and the problem still persists. I am running Windows Vista Ultimate with SP1 installed. I have tried "Running as Administrator" with no difference.
Any one experience anything like this before?
Sometimes you can set a system-wide (or even just personal) Environment Variable and it'll cure it, as opposed to just setting it in your shell.
Go to the Control-panel, then System, then Advanced, and look for the button on Environment Variables. From there, you can follow your nose.
Good luck.
Ant also depends on Java to be on the path. Do you have that?
I would also check to make sure the environment variables ANT_HOME and JAVA_HOME are set up properly in the console.
Is there any chance that the command window you are trying to run Ant in is a different window to the cmd windwo where you set up and verify that its in the path? If the PATH is updated after a cmd window is already open it won't recongnise the change. Not clear if that might be your issue.
If you are in the dir C:\Ant\bin and type "ant" does it recognise it?