I want to install MongoDB in my AWS Cloud9 server. So I followed the instruction as the Cloud9 community page says, but the command to run the MongoDB server in c9 command line i.e.,
$ *./mongod* returns ./mongod: line 1: mongod: command not found.
help me to fix this.
I've tried searching about it on YouTube but it didn't work.
$ *sudo yum install -y mongodb-org*
Loaded plugins: priorities, update-motd, upgrade-helper
1062 packages excluded due to repository priority protections
No package mongodb-org available.
Error: Nothing to do
$ mkdir data
$ echo 'mongod --bind_ip=$IP --dbpath=data --nojournal --rest "$#"' > mongod
$ chmod a+x mongod
$ ./mongod
./mongod: line 1: mongod: command not found
We can start mongodb by running the mongod script on your project root:
command :- ./mongod
From the error given below, it is apparent that the mongo repo wasn't configured in your yum package manager.
vocstartsoft:~ $ sudo yum install -y mongodb-org
Loaded plugins: priorities, update-motd, upgrade-helper 1062 packages excluded due to repository priority protections No package mongodb-org available. Error: Nothing to do
Create /etc/yum.repos.d/mongodb-org-4.0.repo and write the following in it.
[mongodb-org-4.0]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/4.0/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-4.0.asc
Or add the repo directly from the .repo file,
yum-config-manager --add-repo https://repo.mongodb.org/yum/amazon/mongodb-org.repo
Then run,
sudo yum install -y mongodb-org
Reference
https://docs.mongodb.com/manual/tutorial/install-mongodb-on-red-hat/
Either try this: sudo apt install mongodb-clients
Or consider the below process:
ubuntu:~/environment $ At the terminal you’ll see this.
Enter touch mongodb-org-3.6.repo into the terminal
Now open the mongodb-org-3.6.repo file in your code editor (select it from the left-hand file menu) and paste the following into it then save the file:
[mongodb-org-3.6]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/amazon/2013.03/mongodb-org/3.6/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-3.6.asc
* Now run the following in your terminal:
sudo mv mongodb-org-3.6.repo /etc/yum.repos.d
sudo yum install -y mongodb-org
If the second code does not work try:
sudo apt install mongodb-clients
Close the mongodb-org-3.6.repo file and press Close tab when prompted
Change directories back into root ~ by entering cd into the terminal then enter the following commands:
“ubuntu:~ $ “ - Terminal should look like this.
sudo mkdir -p /data/db
echo 'mongod --dbpath=data --nojournal' > mongod
chmod a+x mongod
Now test mongod with ./mongod
Remember, you must first enter cd to change directories into root ~ before running ./mongod
Don't forget to shut down ./mongod with ctrl + c each time you're done working
-if this error pops up while using command mongod
exception in initAndListen: IllegalOperation: Attempted to create a lock file on a read-only directory: /data/db, terminating
Then use the code:
sudo chmod -R go+w /data/db
Reference
I have installed docker-compose using the command
sudo apt install docker-compose
It installed docker-compose version 1.8.0 and build unknown
I need the latest version of docker-compose or at least a version of 1.9.0
Can anyone please let me know what approach I should take to upgrade it or uninstall and re-install the latest version.
I have checked the docker website and can see that they are recommending this to install the latest version'
sudo curl -L https://github.com/docker/compose/releases/download/1.21.0/docker-compose-$(uname -s)-$(uname -m) -o /usr/local/bin/docker-compose
But before that, I have to uninstall the present version, which can be done using the command
sudo rm /usr/local/bin/docker-compose
but this can be used only when the installation was done using curl. I am not sure if the installation was done by curl as I have used
sudo apt install docker-compose
Please let me know what should I do now to uninstall and re-install the docker-compose.
First, remove the old version:
If installed via apt-get
sudo apt-get remove docker-compose
If installed via curl
sudo rm /usr/local/bin/docker-compose
If installed via pip
pip uninstall docker-compose
Then find the newest version on the release page at GitHub or by curling the API and extracting the version from the response using grep or jq (thanks to dragon788, frbl, and Saber Hayati for these improvements):
# curl + grep
VERSION=$(curl --silent https://api.github.com/repos/docker/compose/releases/latest | grep -Po '"tag_name": "\K.*\d')
# curl + jq
VERSION=$(curl --silent https://api.github.com/repos/docker/compose/releases/latest | jq .name -r)
Finally, download to your favorite $PATH-accessible location and set permissions:
DESTINATION=/usr/local/bin/docker-compose
sudo curl -L https://github.com/docker/compose/releases/download/${VERSION}/docker-compose-$(uname -s)-$(uname -m) -o $DESTINATION
sudo chmod 755 $DESTINATION
The easiest way to have a permanent and sustainable solution for the Docker Compose installation and the way to upgrade it, is to just use the package manager pip with:
pip install docker-compose
I was searching for a good solution for the ugly "how to upgrade to the latest version number"-problem, which appeared after you´ve read the official docs - and just found it occasionally - just have a look at the docker-compose pip package - it should reflect (mostly) the current number of the latest released Docker Compose version.
A package manager is always the best solution if it comes to managing software installations! So you just abstract from handling the versions on your own.
If you tried sudo apt-get remove docker-compose and get E: Unable to locate package docker-compose, try this method :
This command must return a result, in order to check it is installed here :
ls -l /usr/local/bin/docker-compose
Remove the old version :
sudo rm -rf docker-compose
Download the last version (check official repo : docker/compose/releases) :
sudo curl -L "https://github.com/docker/compose/releases/download/1.24.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
(replace 1.24.0 if needed)
Finally, apply executable permissions to the binary:
sudo chmod +x /usr/local/bin/docker-compose
Check version :
docker-compose -v
If the above methods aren't working for you, then refer to this answer: https://stackoverflow.com/a/40554985
curl -L "https://github.com/docker/compose/releases/download/1.22.0/docker-compose-$(uname -s)-$(uname -m)" > ./docker-compose
sudo mv ./docker-compose /usr/bin/docker-compose
sudo chmod +x /usr/bin/docker-compose
Based on #eric-johnson's answer, I'm currently using this in a script:
#!/bin/bash
compose_version=$(curl https://api.github.com/repos/docker/compose/releases/latest | jq .name -r)
output='/usr/local/bin/docker-compose'
curl -L https://github.com/docker/compose/releases/download/$compose_version/docker-compose-$(uname -s)-$(uname -m) -o $output
chmod +x $output
echo $(docker-compose --version)
it grabs the latest version from the GitHub api.
Here is another oneliner to install the latest version of docker-compose using curl and sed.
curl -L "https://github.com/docker/compose/releases/download/`curl -fsSLI -o /dev/null -w %{url_effective} https://github.com/docker/compose/releases/latest | sed 's#.*tag/##g' && echo`/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose && chmod +x /usr/local/bin/docker-compose
Do it in three steps. (showing for apt-get installs)
Uninstall the last one. e.g. for apt-get installs
sudo apt-get remove docker-compose
Install the new one (https://docs.docker.com/compose/install/)
sudo curl -L "https://github.com/docker/compose/releases/download/1.29.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
and then
sudo chmod +x /usr/local/bin/docker-compose
Check your version
docker-compose --version
Simple Solution to update docker-compose
This will remove the existing binary of docker-compose and install a new version.
sudo cd /usr/local/bin && sudo rm -rf docker-compose
sudo sudo curl -SL https://github.com/docker/compose/releases/download/v2.2.3/docker-compose-linux-x86_64 -o /usr/local/bin/docker-compose
sudo chmod +x docker-compose
for the latest version visit https://github.com/docker/compose/releases and replace the latest one with v2.1.1
I was trying to install docker-compose on "Ubuntu 16.04.5 LTS" but after installing it like this:
sudo curl -L "https://github.com/docker/compose/releases/download/1.26.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
I was getting:
-bash: /usr/local/bin/docker-compose: Permission denied
and while I was using it with sudo I was getting:
sudo: docker-compose: command not found
So here's the steps that I took and solved my problem:
sudo curl -L "https://github.com/docker/compose/releases/download/1.26.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
sudo ln -sf /usr/local/bin/docker-compose /usr/bin/docker-compose
sudo chmod +x /usr/bin/docker-compose
use this from command line: sudo curl -L "https://github.com/docker/compose/releases/download/1.22.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
Write down the latest release version
Apply executable permissions to the binary:
sudo chmod +x /usr/local/bin/docker-compose
Then test version:
$ docker-compose --version
If you installed with pip, to upgrade you can just use:
pip install --upgrade docker-compose
or as Mariyo states with pip3 explicitly:
pip3 install --upgrade docker-compose
Using latest flag in url will redirect you to the latest release of the repo
As OS name is lower case in github's filename, you should convert uname -s to lower case using sed -e 's/\(.*\)/\L\1/'.
sudo curl -L "https://github.com/docker/compose/releases/latest/download/docker-compose-$(uname -s|sed -e 's/\(.*\)/\L\1/')-$(uname -m)" -o /usr/local/bin/docker-compose && sudo chmod +x /usr/local/bin/docker-compose
On mac (also working on ubuntu):
sudo curl -L "https://github.com/docker/compose/releases/download/<release-version>/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
sudo chmod +x /usr/local/bin/docker-compose
NOTE: write the as here:
https://github.com/docker/compose/releases
Use,
$ sudo curl -L "https://github.com/docker/compose/releases/download/1.24.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose && sudo chmod +x /usr/local/bin/docker-compose
$ docker-compose -v
Docker Engine and Docker Compose Plugin
Since Microsoft took over Docker they worked on porting docker-compose to their Docker Engine CLI plugins. For future support and updates I would recommend using docker compose plugin (Notice the missing dash) which can be install via the docker-compose-plugin package. The following instructions assume that you are using Ubuntu as Distro or any Distro thats using apt as package manager.
Installation Preparations
Update your mirrors:
sudo apt-get update
Make sure the following packages are installed:
sudo apt-get install \
ca-certificates \
curl \
gnupg \
lsb-release
After that add the official Docker GPG Key:
sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
And finally add the the stable repository:
echo \
"deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu \
$(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
Also make sure Docker Engine and other needed dependencies are installed:
sudo apt-get install docker-ce docker-ce-cli containerd.io
Installation of docker compose plugin
sudo apt-get install docker-compose-plugin
Any future updates of the plugin are easily applied via apt.
For further reference take a look at the official installation instructions of Docker Engine and Docker Compose.
After a lot of looking at ways to perform this I ended up using jq, and hopefully I can expand it to handle other repos beyond Docker-Compose without too much work.
# If you have jq installed this will automatically find the latest release binary for your architecture and download it
curl --silent "https://api.github.com/repos/docker/compose/releases/latest" | jq --arg PLATFORM_ARCH "$(echo `uname -s`-`uname -m`)" -r '.assets[] | select(.name | endswith($PLATFORM_ARCH)).browser_download_url' | xargs sudo curl -L -o /usr/local/bin/docker-compose --url
On ubuntu desktop 18.04.2, I have the 'local' removed from the path when using the curl command to install the package and it works for me. See above answer by Kshitij.
In my case, using Windows + WSL2 with Ubuntu 20.04, was necessary only this:
sudo apt update
and then:
sudo apt upgrade
Centos/RHEL
Follow my answer below if you're using Centos7 with an x86-64 architecture. This answer is also available in my github.
Stop Your Docker Containers
I noticed other answers did not talk about stopping your docker containers/images instances before attempting to upgrade gracefully. Assumptions are inevitable but can be costly. Onward we go!
Options to update Docker-Compose
There are 2 options to upgrade docker-compose if you first downloaded and installed docker-compose using the Curl command.
Using Curl, jq package, and Github's direct URL to the docker-compose repository.
Using Curl, Sed, and Github's direct URL to the docker-compose repository.
Note: some of the commands below require "sudo" privileges.
Demonstration
The script below was saved to a file called "update_docker_compose.sh". You need to give this file executable permissions.
Like so:
chmod +x update_docker_compose.sh
"docker_docker_compose.sh" file content:
#!/bin/bash
# author: fullarray (stackoverflow user)
# Contribution shared on: stackoverflow.com
# Contribution also available on: github.com
# date: 06112022
# Stop current docker container running
docker stop containerID
# Remove current docker network running
docker rm containerID
# Remove image of target application(s)
docker image rm imageID
# Delete either dangling (unatagged images) docker containers or images or network
docker system prune -f
# This step depends on the jq package.
# Uncomment jq package installation command below if using Centos7 x86-64.
# sudo yum install jq
# Declare variable to get latest version of docker-compose from github repository
compose_version=$(curl https://api.github.com/repos/docker/compose/releases/latest | jq .name -r)
# Declare variable to target installation directory
target_install_dir='/usr/local/bin/docker-compose'
# Get OS and build (assumes Linux Centos7 and x86_64)
get_local_os_build=$(uname -s)-$(uname -m)
# Execute curl command to carry download and installation operation
curl -L https://github.com/docker/compose/releases/download/$compose_version/docker-compose-$get_local_os_build -o $target_install_dir
# Use chmod to modify permissions to target installation directory (to make it executable)
chmod +x $target_install_dir
# Print docker-compose version to terminal to verify upgrade
$(docker-compose --version)
Edit the script with variables specific to your environment
The script above has a few variables you need to edit with values specific to your docker environment. For instance, you need to replace container ID and image ID with the values that the following commands output.
docker ps
and
docker images output
Once you finalize creating the file (including the edits). Switch to the directory that contains the file. For example, if you created the file in /home/username/script/update_docker_compose.sh
cd /home/username/script
Last, run the script by executing the following
./update_docker_compose.sh
Option 2
Create a script file name "update_docker_compose.sh"
Edit the file and add the following content:
#!/bin/bash
# author: fullarray (stackoverflow user)
# Contribution shared on: stackoverflow.com
# Contribution also available on: github.com
# date: 06112022
# Stop current docker container running
docker stop containerID
# Remove current docker network running
docker rm containerID
# Remove image of target application(s)
docker image rm imageID
# Delete either dangling (unatagged images) docker containers or images or network
docker system prune -f
# Declare variable to target installation directory
target_install_dir='/usr/local/bin/docker-compose'
# Get OS and build (assumes Linux Centos7 and x86_64)
get_local_os_build=$(uname -s)-$(uname -m)
# Execute curl and sed command to carry out download and installation operation
# compose_latest_version=$(curl -L "https://github.com/docker/compose/releases/download/`curl -fsSLI -o /dev/null -w %{url_effective} https://github.com/docker/compose/releases/latest | sed 's#.*tag/##g' && echo`/docker-compose-$get_local_os_build") -o $target_install_dir
# Use chmod to modify permissions to target installation directory (to make it executable)
chmod +x $target_install_dir
# Print docker-compose version to terminal to verify upgrade
$(docker-compose --version)
Edit the script with variables specific to your environment
The script above also has a few variables you need to edit with values specific to your docker environment. For instance, you need to replace container ID and image ID with the values that the following commands output.
docker ps
and
docker images output
Once you finalize creating the file (including the edits). Switch to the directory that contains the file. For example, if you created the file in /home/username/script/update_docker_compose.sh
cd /home/username/script
Last, run the script by executing the following
./update_docker_compose.sh
This is the method of installing docker compose version 2.12.x
Update debian package manager
# apt-get update
# apt-get install docker-compose-plugin
Then install the plugin manualy
DOCKER_CONFIG=${DOCKER_CONFIG:-$HOME/.docker}
mkdir -p $DOCKER_CONFIG/cli-plugins
curl -SL https://github.com/docker/compose/releases/download/v2.12.2/docker-compose-linux-x86_64 -o $DOCKER_CONFIG/cli-plugins/docker-compose
Give permisson of execution of file
chmod +x $DOCKER_CONFIG/cli-plugins/docker-compose
Last test the installation
docker compose version
// Docker Composer Version v2.12.2
If you have homebrew you can also install via brew
$ brew install docker-compose
This is a good way to install on a Mac OS system
Most of these solutions are outdated or make you install old version.
To install the latest
sudo apt install jq
DOCKER_COMPOSE_VERSION=$(curl --silent https://api.github.com/repos/docker/compose/releases/latest | jq .name -r)
sudo curl -L "https://github.com/docker/compose/releases/download/$DOCKER_COMPOSE_VERSION/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
sudo chmod +x /usr/local/bin/docker-compose
Well, my case was pretty weird. I am using wsl2, and Docker Desktop (Windows 11). I stop getting this error after rename the folder "docker" to "config-dev-server" and update de Dockerfile like this this:
COPY ./docker/apache/apache2.conf /etc/apache2/apache2.conf
to
COPY ./config-dev-server/apache/apache2.conf /etc/apache2/apache2.conf
With a newer Docker Desktop for Mac 3.3.0, you don't need to install Docker Compose as a seperate package. Docker Compose comes as a first class citizen installed with Docker by default. Check out the below CLI:
docker compose version
Docker Compose version 2.0.0-beta.1%
I am trying to run multiple mongod instances on the same centos machine with different config files.
I am getting following error while running the instance as a service:
sudo service mongod1 start
/var/lib/mongo1: boost::filesystem::status: Permission denied: "/var/lib/mongo1/mongod.lock"
I have added the permissions for the /var/lib/mongo1 using:
sudo chmod -R 600 /var/lib/mongo1
I also tried with 700, 755 and 777 at the end but nothing seems to work.
mongod:mongod is the owner of the folder /var/lib/mongo1
Any help is appreciated.
I know this is really late but I was struggling with this for days and just now found the fix. That being said for future users running into this issue the solution if you're using SELinux is to check the context of the default mongodb path against your own to make sure they are the same by executing
ls -dZ /var/lib/mongo/
the output should look something like this
drwxr-xr-x. mongod mongod system_u:object_r:mongod_var_lib_t:s0 /var/lib/mongo/
if it's not then you can copy it by doing
chcon -R --reference=/var/lib/mongo /your/path
the source can be found here
Maybe the lock file is missing? Which might explain why chmod isn't having the desired effect...
Try:
touch /var/mongo1/mongod.lock
chown mongod:mongod
chmod 600 /var/mongo1/mongod.lock
important :
Don't try to restart mongo using sudo as it tries to change the user to root where as /var/lib/mongodb owner is mongod:mongod
Please remember that Directories needs to have execute permission, but the files within the directories do not need to execute permission.
The following 2 commands worked for me
$ sudo chmod -R 770 /var/lib/mongo1
$ sudo find /var/lib/mongo1 -type f -exec chmod 660 {} \;
This will first give everything under /var/lib/mongo1 execute permission, and then return all the normal files to having only read and write, but not execute.
Everytime I run:
php bin/magento cache:flush
php bin/magento cache:clean
I get the following message when reloading the page:
An error has happened during application run. See exception log for
details.
exception.log:
ain.CRITICAL: Exception: Warning: file_put_contents(/var/www/magento2/var/cache//mage-tags/mage---914_CONFIG_SCOPES): failed to open stream: Permission denied in /var/www/magento2/vendor/colinmollenhour/cache-backend-file/File.php on line 663 in /var/www/magento2/vendor/magento/framework/App/ErrorHandler.php:61
When I then run:
sudo chmod -R 777 var/ pub/
The error is gone.
How could this happen everytime I clean cache and what should be done to back trace/solve this issue?
The root of such type of issues is same: the user that run web-server differs from the user which runs console command.
Preconditions
You should define what user run your web-server.
$ ls -la
This command could who creates var/cache and so on.
Let's decide that web-server run under www-data user.
Solution 1
$ sudo -H -u www-data __some_command_here_
This format allows you to run the command under web-server user. So application will have same rights as a server (user www-data).
So you command php bin/magento cache:flush transforms to
$ sudo -H -u www-data php bin/magento cache:flush
Solution 2
Add web-server's user to your user to the same group.
$ id
uid=1001(ygl) gid=1002(ygl) groups=1002(ygl),112(nopasswdlogin)
this one will show information about the current user.
$ sudo usermod -a -G www-data
this command will add www-data to yourGroupName.
this is a tutorial to install webacula 7 (after bacula 7 with mysql)
this is the tutorial for centos+bcula that i used (without webmin section)
http://www.backupcentral.com/phpBB2/two-way-mirrors-of-external-mailing-lists-3/bacula-25/howto-install-bacula-7-on-centos-7-fresh-install-126395/
Then to install webacula:
yum install httpd php php-mysql php-gd
wget http://downloads.sourceforge.net/project/webacula/webacula/7.0.0/webacula-7.0.0.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fwebacula%2F%3Fsource%3Dtyp_redirect&ts=1429012567&use_mirror=garr
(download webacula 7.0.0)
yum install httpd php php-mysql
tar -xzvf /root/webacula-7.0.0.tar.gz\?r\=http...
mv webacula-7.0.0 /var/www/
mv /var/www/webacula-7.0.0/ /var/www/webacula
chown -R root.root .
chown apache.apache cache
groupadd bacula
usermod -aG bacula apache
chgrp bacula /usr/sbin/bconsole
/etc/bacula/bconsole.conf
chgrp bacula /etc/bacula/bconsole.conf
cd ../application
nano config.ini
update:
bacula.bconsole = "/usr/sbin/bconsole"
bacula.bconsolecmd = "-n -c /etc/bacula/bconsole.conf"
nano /etc/sudoers
comment:
# Defaults requiretty
nano /etc/bacula/bconsole.conf
update:
Password = "YOUR PASS"
nano /etc/selinux/config
update:
SELINUX=disabled
nano /etc/sudoers.d/apache
add:
apache ALL=NOPASSWD: /usr/sbin/bconsole
reboot (because the selinux)
check with this command:
su -l apache -s /bin/sh -c "/usr/bin/sudo /usr/sbin/bconsole -n -c /etc/bacula/bconsole.conf"
normal respons :
Connecting to Director localhost:9101
1000 OK: 1 bacula-dir Version: 7.0.5 (28 July 2014)
Enter a period to cancel a command.
*quit
cd /var/www/webacula/install/apache/
cp webacula.conf /etc/httpd/conf.d/webacula.conf
nano /etc/httpd/conf.d/webacula.conf
update:
Alias /webacula /usr/share/webacula/html
<Directory /usr/share/webacula/html>
...
Deny from all
to:
Alias /webacula /var/www/webacula/html
<Directory /var/www/webacula/html>
...
Allow from all
nano /var/www/webacula/application/config.ini
update your db pass
nano /etc/bacula/bacula-dir.conf
update :
catalog = all, !skipped, !saved
cd /var/www/webacula/install
./password-to-hash.php your bacula webming pass
take ther respons and put in:
nano db.conf
update:
db_pwd="your root mysql pass"
....
webacula_root_pwd="your res from ./password-to-hash.php"
cd MySql/
./10_make_tables.sh
./20_acl_make_tables.sh
systemctl restart httpd
add Zend to webacula:
cd /var/www/webacula/library
wget https://packages.zendframework.com/releases/ZendFramework-1.12.3/ZendFramework-1.12.3-minimal.tar.gz (download only ver 1.12.3!!!!!!)
tar -xzf ZendFramework-1.12.3-minimal.tar.gz
mkdir Zend
cp -Rf ZendFramework-1.12.3-minimal/library/Zend/* Zend/.
go to website :)
now we finished but for me the root password did not work, so to fix this i did:
mysql -uroot -p
use bacula;
update webacula_users set email='your email here';
go to website and reset password