Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 1 year ago.
Improve this question
Hi I have a new on prem server DELLEMC and I'm trying to run the deployment group registration script but the script won't run and after a while this error will appear "DownloadFile" with "2" argument(s): "
I also refer to this link for help but it didn't work https://github.com/MicrosoftDocs/azure-devops-docs/issues/263
AzureDevops Deployment Group won't run on Windows Server 2019
According to the error message:
Exception calling "DownloadFile" with "2" argument(s): "The operation has timed out."
It seems there is something wrong to download the agent, please try it again. Note, make sure the network is fast and stable. If this issue still exists, please do the following steps:
Download the agent bits from here and select the v2.162.0 or
above . User can download it from other machine and copy that to
this machine if the download is failing because of network issue.
Extract the zip in some folder.
Open PowerShell admin command prompt and go to the folder
Run the below PowerShell script as an administrator:
.\config.cmd --deploymentgroup --deploymentgroupname "{deploymentGroupName}" --agent $env:COMPUTERNAME --runasservice --work '_work' --url 'https://iam-costco.visualstudio.com/' --projectname '{ProjectName}'
You could check this thread for some more details.
Hope this helps.
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
Improve this question
Short description: AWS RDS connecting server to PgAdmin 4, PostgreSQL 11
Done: I have done similar to this guy or to this aws guide but at the end when I click save it does not accept it for me. instead gives the following
ERROR:
Error saving properties
Unable to connect to server:
timeout expired
What I have tried to solve the problem:
The instance is active it is 2 hours after creation
I have also allowed to access database with outside of AWS database client "YES"
this stack overflow answer does not deliver results https://stackoverflow.com/a/37903485/10270590 actually after refreshing my security group like the guide says my whole database disappeared
I have home wi-fi so there are no corporate firewalls or any of those issues https://serverfault.com/q/705312/535406
while reading the pervious server fault post I looked up my
RDS/Databases: what was empty
RDS/Security groups: empty and I have this message:
Your account does not support the EC2-Classic Platform in this region.
DB Security Groups are only needed when the EC2-Classic Platform is supported.
Instead, use VPC Security Groups to control access to your DB Instances.
I have tried which this question https://serverfault.com/questions/656079/unable-to-connect-to-public-postgresql-rds-instance that had 2 good answers but they gave the same error even after doing bot of the changes
https://serverfault.com/a/656119/535406
https://serverfault.com/a/880710/535406
same as the above one - AWS RDS Database show timeout error
Edit inbound rules
Type have to be turned to: all traffic and my IP. than it works
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 3 years ago.
Improve this question
I deployed my vapor project to Ubuntu. And made the configuration of supervisor and Nginx.
When I invoke my server. first call is success but When I try second call I get 502 bad gateway error from browser. When I check error log, the error is
"Fatal error: Error raised at top level: bind(descriptor:ptr:bytes:) failed: Address already in use (errno: 98) : file /home/buildnode/jenkins/wo$"
If I kill the port(8080) process. And after, I try to connect again first try is success then get fail again.
What should I do to get rid of this error?
This might be caused by another process using that port.
I had the same issue and was able to solve it by listing all the processes on port :8080:
$ sudo lsof -i :8080
and then killing all of them one by one by typing:
$ kill {PID of the process}
After that, my app built again properly.
taken from here
I had the same issue. This worked for me:
$ kill -9 {PID of the process}
Hope this helps!
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 5 years ago.
Improve this question
I have a Simple Script to create a user and add it to administrators localgroup in a local computer:
NET USER admin password /ADD
NET LOCALGROUP administrators admin /ADD
I'd like to create a script that copy & execute my file (or execute the commands above) in every available computer in my LAN network. i have admin right to do it manually. but i would very like to automate the process of adding user + give it admin privileges with shell script.
p.s.
If there is another way to do it with CMD / PowerShell it would be great.
I don't have access to the internet so third party programs are not an option.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 5 years ago.
Improve this question
service autofs restart
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service autofs restart
/etc/init.d/autofs: line 54: initctl: command not found
I have looked up on the web and do not see any yum package that can install initctl. can you please help.
CentOS 7 comes with systemctl to manage service. You don't need to use initctl.
service autofs restart should point to systemctl restart autofs
You can check the status of this service with systemctl status autofs and post us the output if not able to restart.
Closed. This question is off-topic. It is not currently accepting answers.
Want to improve this question? Update the question so it's on-topic for Stack Overflow.
Closed 10 years ago.
Improve this question
I'm trying to open a sharepoint site in SPD with no success.
SPD is processing, and nothing happens, it keeps processing as if it wouldn't find the site.
Do you have any clue where it comes from ?
For information I'm using the Site administration for this and the SPDSettings of the Web Application are all set to true.
EDIT : After waiting for 10 minutes I had this error :
Service Unavailable
Service Unavailable HTTP Error 503. The service is unavailable.
EDIT 2 : I think this error comes from the fact that i was deploying another solution in the same web application, but in another site collection ...
Your question is unfortunately too general to provide a specific answer. The SharePoint designer communicates to your SharePoint site via a series of web services to pull down the information. There's probably issues going on during these requests. Have you tried logging into the SharePoint Designer as the System Account in order to dismiss any security issues with the site contents?
To diagnose the source of these issues, review the ULS logs that are created during the period of trying to access the designer. These can be reviewed at:
\\<Server Name>\c$\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Use ULS Log Viewer to provide a real time view of all the log entries SharePoint creates during your usage.