I am newbiee to openbmc and Redfish.
I wanted to view the https://xxx.xxx.xxx(or localhost):8000/redfish/v1" content in webbrowser after i build the OpenBMC. Please guide to connect the dots to view the redfish/v1 content in the browser after building/compiling the OpenBMC.
Here are the steps used to compile the openBMC:
here are the steps i have followed:
Clone OpenBMC project : git clone https://github.com/openbmc/openbmc.git in the server machine
Compile using the following command: TEMPLATECONF=meta-phosphor/conf . openbmc-env
modify the following files:
#build vi conf/local.conf (modify the line "-MACHINE??=qemuarm" " to "-MACHINE??=raspberrypi3-64" "
#build vi conf/bblayer.conf (add the following line "/home/khader/openbmc/meta-raspberrypi " to the line above /home/khader/openbmc/metaphosphor "
#build bitbake obmc-phosphor-image
The above steps I have used to build an Openbmc project.
Can you help me what further steps should i need to do so that i can view the /redfish/v1/ content in the webbrowser.
Note:- I am compiling the openbmc code in the local machine and wants to use the same as localhost server to view the /redfish/v1 contents in the webbrowser.
Any help /guidelines on this will really help me alot.
Appreciate all your help.
Thanks & Regards,
khader
Related
I am using an embedded Linux system based on Yocto/Open Embedded Linux and the systemd-journald-remote program is missing.
When I look at the systemd recipe the program is mentioned. It seems like it is not compiled or added by default to the image. I understand how to add normal recipes but unfortunately I don't understand how to add such a "subpackage".
The Bitbake documentation is unfortunately overwhelming for a beginner like me. Can someone help me?
Create bbappend for systemd in your meta-layer with following path recipes-core/systemd/systemd_%.bbappend and:
PACKAGECONFIG_append = " \
microhttpd \
"
You can add it into your image .bb or .bbappend file with following parameter:
IMAGE_INSTALL += "systemd-journal-remote"
This will add systemd-journal-remote into your image. Install the image on your target board, log in to your target and configure the file /etc/systemd/journal-remote.conf.
Then, enable the service with systemctl enable systemd-journal-remote, and then restart it with systemctl restart systemd-journal-remote.
In the book "Embedded Linux Systems with the Yocto Project", Chapter 4 contains a sample called "HelloWorld - BitBake style". I encountered a bunch of problems trying to get the old example working against the "Sumo" release 2.5.
If you're like me, the first error you encountered following the book's instructions was that you copied across bitbake.conf and got:
ERROR: ParseError at /tmp/bbhello/conf/bitbake.conf:749: Could not include required file conf/abi_version.conf
And after copying over abi_version.conf as well, you kept finding more and more cross-connected files that needed to be moved, and then some relative-path errors after that... Is there a better way?
Here's a series of steps which can allow you to bitbake nano based on the book's instructions.
Unless otherwise specified, these samples and instructions are all based on the online copy of the book's code-samples. While convenient for copy-pasting, the online resource is not totally consistent with the printed copy, and contains at least one extra bug.
Initial workspace setup
This guide assumes that you're working with Yocto release 2.5 ("sumo"), installed into /tmp/poky, and that the build environment will go into /tmp/bbhello. If you don't the Poky tools+libraries already, the easiest way is to clone it with:
$ git clone -b sumo git://git.yoctoproject.org/poky.git /tmp/poky
Then you can initialize the workspace with:
$ source /tmp/poky/oe-init-build-env /tmp/bbhello/
If you start a new terminal window, you'll need to repeat the previous command which will get get your shell environment set up again, but it should not replace any of the files created inside the workspace from the first time.
Wiring up the defaults
The oe-init-build-env script should have just created these files for you:
bbhello/conf/local.conf
bbhello/conf/templateconf.cfg
bbhello/conf/bblayers.conf
Keep these, they supersede some of the book-instructions, meaning that you should not create or have the files:
bbhello/classes/base.bbclass
bbhello/conf/bitbake.conf
Similarly, do not overwrite bbhello/conf/bblayers.conf with the book's sample. Instead, edit it to add a single line pointing to your own meta-hello folder, ex:
BBLAYERS ?= " \
${TOPDIR}/meta-hello \
/tmp/poky/meta \
/tmp/poky/meta-poky \
/tmp/poky/meta-yocto-bsp \
"
Creating the layer and recipe
Go ahead and create the following files from the book-samples:
meta-hello/conf/layer.conf
meta-hello/recipes-editor/nano/nano.bb
We'll edit these files gradually as we hit errors.
Can't find recipe error
The error:
ERROR: BBFILE_PATTERN_hello not defined
It is caused by the book-website's bbhello/meta-hello/conf/layer.conf being internally inconsistent. It uses the collection-name "hello" but on the next two lines uses _test suffixes. Just change them to _hello to match:
# Set layer search pattern and priority
BBFILE_COLLECTIONS += "hello"
BBFILE_PATTERN_hello := "^${LAYERDIR}/"
BBFILE_PRIORITY_hello = "5"
Interestingly, this error is not present in the printed copy of the book.
No license error
The error:
ERROR: /tmp/bbhello/meta-hello/recipes-editor/nano/nano.bb: This recipe does not have the LICENSE field set (nano)
ERROR: Failed to parse recipe: /tmp/bbhello/meta-hello/recipes-editor/nano/nano.bb
Can be fixed by adding a license setting with one of the values that bitbake recognizes. In this case, add a line onto nano.bb of:
LICENSE="GPLv3"
Recipe parse error
ERROR: ExpansionError during parsing /tmp/bbhello/meta-hello/recipes-editor/nano/nano.bb
[...]
bb.data_smart.ExpansionError: Failure expanding variable PV_MAJOR, expression was ${#bb.data.getVar('PV',d,1).split('.')[0]} which triggered exception AttributeError: module 'bb.data' has no attribute 'getVar'
This is fixed by updating the special python commands being used in the recipe, because #bb.data was deprecated and is now removed. Instead, replace it with #d, ex:
PV_MAJOR = "${#d.getVar('PV',d,1).split('.')[0]}"
PV_MINOR = "${#d.getVar('PV',d,1).split('.')[1]}"
License checksum failure
ERROR: nano-2.2.6-r0 do_populate_lic: QA Issue: nano: Recipe file fetches files and does not have license file information (LIC_FILES_CHKSUM) [license-checksum]
This can be fixed by adding a directive to the recipe telling it what license-info-containing file to grab, and what checksum we expect it to have.
We can follow the way the recipe generates the SRC_URI, and modify it slightly to point at the COPYING file in the same web-directory. Add this line to nano.bb:
LIC_FILES_CHKSUM = "${SITE}/v${PV_MAJOR}.${PV_MINOR}/COPYING;md5=f27defe1e96c2e1ecd4e0c9be8967949"
The MD5 checksum in this case came from manually downloading and inspecting the matching file.
Done!
Now bitbake nano ought to work, and when it is complete you should see it built nano:
/tmp/bbhello $ find ./tmp/deploy/ -name "*nano*.rpm*"
./tmp/deploy/rpm/i586/nano-dbg-2.2.6-r0.i586.rpm
./tmp/deploy/rpm/i586/nano-dev-2.2.6-r0.i586.rpm
I have recently worked on that hands-on hello world project. As far as I am concerned, I think that the source code in the book contains some bugs. Below there is a list of suggested fixes:
Inheriting native class
In fact, when you build with bitbake that you got from poky, it builds only for the target, unless you mention in your recipe that you are building for the host machine (native). You can do the latter by adding this line at the end of your recipe:
inherit native
Adding license information
It is worth mentioning that the variable LICENSE is important to be set in any recipe, otherwise bitbake rises an error. In our case, we try to build the version 2.2.6 of the nano editor, its current license is GPLv3, hence it should be mentioned as follow:
LICENSE = "GPLv3"
Using os.system calls
As the book states, you cannot dereference metadata directly from a python function. Which means it is mandatory to access metadata through the d dictionary. Bellow, there is a suggestion for the do_unpack python function, you can use its concept to code the next tasks (do_configure, do_compile):
python do_unpack() {
workdir = d.getVar("WORKDIR", True)
dl_dir = d.getVar("DL_DIR", True)
p = d.getVar("P", True)
tarball_name = os.path.join(dl_dir, p+".tar.gz")
bb.plain("Unpacking tarball")
os.system("tar -x -C " + workdir + " -f " + tarball_name)
bb.plain("tarball unpacked successfully")
}
Launching the nano editor
After successfully building your nano editor package, you can find your nano executable in the following directory in case you are using Ubuntu (arch x86_64):
./tmp/work/x86_64-linux/nano/2.2.6-r0/src/nano
Should you have any comments or questions, Don't hesitate !
I'm trying to add auditd to Yocto linux.
I added the selinux layer and it's dependent layers: openembedded-core and meta-virtualization.
I added the layers to bblayers.conf.
I added DISTRO_FEATURES_append = " acl xattr pam selinux"
and PREFERRED_PROVIDER_virtual/refpolicy ?= "refpolicy-mls" to the local.conf file.
After building (by using bitbake core-image-base) and running the qemu, the kauditd process is running, but all user-space tools are not.
The /etc/audit folder is not exist ,non of the audit's config files exists (audit.rules) and no user-space audit process is running.
In the layer's info it is declared - "User space tools for kernel auditing".
What I am missing?
Thanks.
I think I found something that will answer your question: If you know what an example binary or library you expect to be in the target image, you can find what recipe the executable is in, and then add that package to the image.
Start with the name of a binary or library you expect to be in the image and run the following. For me, I am using a CAN bus executable called candump. I wonder what recipe it's in? To find out, I issue:
devtool search candump
Which returns:
can-utils
If nothing is returned, I'd double check your conf/bblayers.conf so that the layer you think it may be in is actually being seen by your build system. If you are unsure, take a look at the link below which points to OpenEmbedded which has a handy search utility for packages.
After you find the recipe, you can then include that recipe into your build.
Here is a good reference in doing what I think you're asking on the OpenEmbedded website:
https://wiki.yoctoproject.org/wiki/Cookbook:Example:Adding_packages_to_your_OS_image
I just added auditd to my system. This is what I did.
First I got the repository checked out.
cd /path/to/yocto
git clone git://git.yoctoproject.org/meta-selinux
cd meta-selinux
# checkout the branch matching the Yocto release you are on
git checkout thud
Then I added auditd to my build.
cd /path/to/build
bitbake-layers add-layer /path/to/yocto/meta-selinux
cat >> conf/local.conf <<'END'
IMAGE_INSTALL_append = " auditd"
END
bitbake my_normal_image_target
Even though the Yocto recipe is called audit, the package name is auditd.
Of course, auditd without selinux is useless but it did attempt to run (journalctl -u auditd) and /etc/audit exists.
FWIW: To get auditd to a point where it reports say, login success/failure, I had to do a few more things. I'm not just adding it to a standard Yocto image, but to a custom image and custom machine. I'm already using systemd so I didn't have to change that (the layer seems to indicate it's required?). My local.conf looked like this.
# enable selinux
DISTRO_FEATURES_append = " acl xattr pam selinux"
# set the policy
PREFERRED_PROVIDER_virtual/refpolicy ?= "refpolicy-mls"
# install selinux packages and auditd
IMAGE_INSTALL_append = " packagegroup-core-selinux auditd"
# tell the kernel to enable selinux (non-enforcing) and audting
APPEND_append = " selinux=1 enforcing=0 audit=1"
I also had to change linux-yocto_selinux.inc to load selinux.cfg later. Probably layer/recipe ordering could have solved this too?
-SRC_URI += "${#bb.utils.contains('DISTRO_FEATURES', 'selinux', 'file://selinux.cfg', '', d)}"
+SRC_URI_append = "${#bb.utils.contains('DISTRO_FEATURES', 'selinux', 'file://selinux.cfg', '', d)}"
With all that in place, I see audit logs in my journal.
I would like to add default ssh connections to eclipse as global configuration (generic through workspaces). For that, im using -pluginCustomization runtime parameter. Here is my test.ini file:
org.eclipse.remote.core/connectionTypeId=org.eclipse.remote.JSch
org.eclipse.remote.core/connections/org.eclipse.remote.JSch/m3ulcb/JSCH_ADDRESS_ATTR=localhost
org.eclipse.remote.core/connections/org.eclipse.remote.JSch/m3ulcb/JSCH_IS_PASSWORD_ATTR=true
org.eclipse.remote.core/connections/org.eclipse.remote.JSch/m3ulcb/JSCH_LOGIN_SHELL_COMMAND_ATTR=/bin/bash -l -c '{0}'
org.eclipse.remote.core/connections/org.eclipse.remote.JSch/m3ulcb/JSCH_PORT_ATTR=22
org.eclipse.remote.core/connections/org.eclipse.remote.JSch/m3ulcb/JSCH_TIMEOUT_ATTR=0
org.eclipse.remote.core/connections/org.eclipse.remote.JSch/m3ulcb/JSCH_USERNAME_ATTR=foo
org.eclipse.remote.core/connections/org.eclipse.remote.JSch/m3ulcb/JSCH_USE_LOGIN_SHELL_ATTR=true
eclipse.preferences.version=1
I see that the connectionTypeId takes efect and my default connection goes to ssh. The rest just does not work.
Any help would be really appreciate.
Thanks!
PS: I'm an eclipse newbie
I am trying to configure accesslog. I have changed the slapd.conf file and trying to test using slaptest but i am getting error while executing slaptest -f /etc/openldap/slapd.conf.
slapd.conf configuration:
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
.
.
modulepath /usr/lib/openldap/
moduleload accesslog.la
overlay accesslog
logdb "cn=accesslog"
logops writes
logsuccess TRUE
I am getting error at overlay accesslog
overlay "accesslog" not found
slaptest: bad configuration file!
Am I missing something..?
I found the issue on my own. I have not compiled the openldap with --enable overlay.
To solve this issue
i have downloaded the openldap src
./configure --enable-overlays (./configure [options] [variable=value ...])
Now modify the slapd.conf to load accesslog.la and execute slaptest -f /etc/openldap/slapd.conf. Now you wont find any error.
restart the slapd.