I'm trying to install lisp in my laptop by following the instruction command and steps that is suggested this site : https://grishagin.com/lisp/windows10/2017/01/26/install-lisp-Windows10.html.
I have done following steps :
I've extract emacs in my specified directory and add it's bin path to the system variable
PATH
I've created a another new directory named C:\HOME and add it system variable with variable HOME and
value C:\HOME
Clisp 2.48 is installed in my lisp directory and To fix some problem, copied svm.dll out of clisp-
2.48/libsvm directory into clisp-2.48/full.
Place quicklisp.lisp into lisp directory and run following code in clisp
(load "C:/lisp/quicklisp.lisp"),
(quicklisp-quickstart:install :path "C:/lisp/quicklisp/")
this two command worked but when i go from next command : (ql:add-to-init-file)
It shows this error :- READ from #<INPUT CONCATENATED-STREAM # #>: there is no package
with name "QL".
Can anyone please help to solve this error and explain how does this all help for lisp to keep working?
So, in the QuickLisp installation instructions, it says:
(quicklisp-quickstart:install)
But you include an optional parameter :path "C:/lisp/quicklisp/"
Try it again, without the optional parameter, and see if that works better.
Related
I've downloaded the binaries: or-tools_VisualStudio2022-64bit_v9.3.10497
I'm using vs2022 on win10. My shell has cygwin in the path if it's related.
I ran
%comspec% /k "C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Auxiliary\Build\vcvars64.bat"
cl.exe is in the path, and which.exe finds it.
I ran make test_cc, but it complained
the cl command was not found in your PATH
exit 127
make: *** [Makefile:271: test_cc] Error 127
The var CXX_BIN was empty even though which cl returned the correct path. I set it manually to cl.
Then, there was a complaint about echo and a newline, which I commented out. Then, it couldn't find md, so I created manually md objs.
A few of the examples were built, but then it stopped with another error. For now, I just got what I want:
make run SOURCE=examples/cpp/solve.cc
but probably there was an easier way to get it?
I tried to build it from the source using cmake. Doesn't work off-the-shelf as well:
Build abseil-cpp: OFF
...
CMake Error at C:/prj-external-libs/vcpkg/scripts/buildsystems/vcpkg.cmake:824 (_find_package):
By not providing "Findabsl.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "absl", but
CMake did not find one.
Could not find a package configuration file provided by "absl" with any of
the following names:
abslConfig.cmake
absl-config.cmake
Add the installation prefix of "absl" to CMAKE_PREFIX_PATH or set
"absl_DIR" to a directory containing one of the above files. If "absl"
provides a separate development package or SDK, be sure it has been
installed.
Call Stack (most recent call first):
cmake/deps.cmake:33 (find_package)
CMakeLists.txt:304 (include)
If finds gurobi95.dll, but it can't find the function GRBtunemodeladv.
On failure, solve.exe crashes with (unknown) names in the stack trace. Need to add debug symbols and graceful error handling.
cmake looks more promising, and I was missing dependencies. Should give it a flag -DBUILD_DEPS:BOOL=ON.
OR-Tools depends on few external dependencies so CMake build will try to find them using the idiomatic find_package() => your distro/env(vcpkg ?) must provide them, just regular CMake stuff here.
ref: https://cmake.org/cmake/help/latest/command/find_package.html
note: we provide few findFoo.cmake here https://github.com/google/or-tools/tree/main/cmake
We also provide a meta option to build statically all our dependencies, simply pass -DBUILD_DEPS=ON cmake option at configure time.
You can also build only some of them, please take a look at
https://github.com/google/or-tools/tree/main/cmake#dependencies
Concerning Gurobi and GRBtunemodeladv symbol, this one has been removed by last version of Gurobi so we fix it in v9.4/main/stable branch...
see: https://github.com/google/or-tools/commit/d6e0feb8ae96368523deb99fe4318d32e80e8145
I'm new to Common Lisp, I'm using Emacs/SLIME on Windows 10, and I'm trying to wrap my head around how CL and ASDF/packaging works.
I have a custom package 'my-pack' in a directory 'D:\Dropbox\my-packages'.
I have created a .conf file in:
%LOCALAPPDATA%\config\common-lisp\source-registry.conf.d\
And added this line:
(:tree "D:\\Dropbox\\my-packages\\")
I opened Emacs, started SLIME and made the project via the REPL:
(cl-project:make-project #p"D:/Dropbox/my-packages/my-pack)
I verified that the project is in the directory and then loaded the system with asdf (version 3.3.1):
(asdf:load-system :my-pack)
And it worked fine.
But when I quit and restart Emacs, I get the following error when trying to the load the system:
Component :MY-PACK not found
[Condition of type ASDF/FIND-COMPONENT:MISSING-COMPONENT]
As far as I can tell I've followed the steps in the manual. Any help appreciated.
cl-project's make-project ends with this line:
(push dir asdf:*central-registry*)
it adds your new project's directory to this list that tells ASDF where to look for projects. What is its value when you restart CL?
2.
\config\common-lisp\
Shouldn't it be .config?
However, I don't encourage to use this conf file with :tree. The doc says:
tell ASDF to recursively scan all the subdirectories
So, imagine that just once, you try yourself at web development and you install, for example, JavaScript dependencies with npm or equivalent, you'll end up with a gigantic node_modules/ and your Lisp will now take a few seconds to start up.
I suggest to put your projects under ~/common-lisp/ or ~/quicklisp/local-projects, or to create symlinks, or to add yourself your projects in asdf:*central-registry* from your Lisp startup file:
;; .sbclrc
(pushnew "/home/me/projects/ciel/" asdf:*central-registry* :test #'equal)
I'm trying to go through the Software Foundations Coq book (http://www.cis.upenn.edu/~bcpierce/sf/current/toc.html), but when I compile Induction.v (which looks like http://www.cs.uml.edu/~rhenniga/coq/sf_induction.html), I get the error message "Error: The reference evenb was not found in the current environment." -- even after compilation of Basics.v. Any ideas why?
I can confirm that opening CoqIDE from the same directory works on macOS: cd <sf-dir>; /Applications/CoqIDE_8.5.app/Contents/MacOS/coqide
from: The reference "X" was not found in the current environment
Try to erase every blank character in the address related to Coq or software-foundation book.
In my case, when I struggled with the file
C:\Users\XxX\Documents\software foundation\lf\Induction.v
, CoqIDE failed to execute From LF Require Export Basics and to define evenb_S theorem. Also, I couldn't see any files like Basics.vo or Basics.glob created when Basics.v with [Compile] - [Compile buffer] function in CoqIDE.
Everything works fine when I change my folder name to
C:\Users\XxX\Documents\softwarefoundation\lf\Basic.v
The Coq installer had already informed this >>
Link to the screenshot image of Coq setup
Compiling Basic.v with coqc Basics.v command should produce Basic.vo and Basic.glob files in the same directory. Then you should be fine with compiling Induction.v in the same directory as well; coqc Induction.v.
I am trying to call Lisp code from a C function and, while following the tutorial, I am stuck at
clisp-link add base base+sort sort
This gives me error: base does not contain a CLISP linking set.
I have followed the tutorial step-by-step but this point is a blocker.
Is someone aware of the reason?
Chances are there is no base sub-directory in your working directory because you did not build clisp yourself.
Try clisp -help to find out where your base is located and give clisp-link the full path.
If you supply the full path to your clisp installation directory:
clisp-link add /usr/lib/clisp-2.49/base base+sort sort
it should work.
The error message you are getting indicates that base is missing one or more of the following files:
lisp.a
lisp.run
lispinit.mem
modules.h
modules.o
makevars
in which case you should file a bug report with your vendor.
On ubuntu 11.10 I installed eclipse from repositories, installed adt and cdt plugins. I am able to compile the hello-jni example using command line, but i would like to use eclipse for the task.
I followed the guide here: http://mhandroid.wordpress.com/2011/01/23/using-eclipse-for-android-cc-development/ and defined a PATH variable in eclipse preferences (window->preferences->c/c++->environment), pointing to the ndk-r7b folder. But the project won't buid. I get this error:
(Cannot run program "ndk-build"
(in directory "/home/athos/android/ndk-r7b/samples/hello-jni"):
java.io.IOException:
error=2, File o directory non esistente)
(last line should be "no such file or directory" in english)
If I specify "${PATH}/ndk-build" or "/home/athos/android/ndk-r7b/ndk-build" as the build command. i get this:
/home/lavoro/android/ndk-r7b/ndk-build
ERROR: Cannot find 'make' program. Please install Cygwin make package
/home/lavoro/android/ndk-r7b/ndk-build: 40: dirname: not found
or define the GNUMAKE variable to point to it.
If I define the GNUMAKE variable in window->preferences->c/c++->environment i get this:
ERROR: Your GNUMAKE variable is defined to an invalid name: /usr/bin/make
Please fix it to point to a valid make executable (e.g. /usr/bin/make)
Which is funny, since It suggests the exact same directory I indicated. Make is installed and present at the indicated location.
What am I missing?
It's a bit ugly, but you can always put
/fully/qualified/path/to/ndk-build
In your build command.