I can't install nodejs using the meta-nodejs library on qemux86-64.
bitbake nodejs gives the following error
Initialising tasks: 100%
|########################################################################################################################################################################|
Time: 0:00:05 Sstate summary: Wanted 7 Found 0 Missed 7 Current 780
(0% match, 99% complete) NOTE: Executing Tasks ERROR:
nodejs-7.10.0-r1.4 do_configure: Execution of
'/home/user/poky/build/tmp/work/core2-64-poky-linux/nodejs/7.10.0-r1.4/temp/run.do_configure.68465'
failed with exit code 127: /usr/bin/env: ‘python’: No such file or
directory WARNING: exit code 127 from a shell command.
ERROR: Logfile of failure stored in:
/home/user/poky/build/tmp/work/core2-64-poky-linux/nodejs/7.10.0-r1.4/temp/log.do_configure.68465
Log data follows: | DEBUG: Executing shell function do_configure |
/usr/bin/env: ‘python’: No such file or directory | WARNING: exit code
127 from a shell command. | ERROR: Execution of
'/home/user/poky/build/tmp/work/core2-64-poky-linux/nodejs/7.10.0-r1.4/temp/run.do_configure.68465'
failed with exit code 127: | /usr/bin/env: ‘python’: No such file or
directory | WARNING: exit code 127 from a shell command. | ERROR: Task
(/home/user/poky/meta-openembedded/meta-nodejs/recipes-devtools/nodejs/nodejs_7.10.0.bb:do_configure)
failed with exit code '1' NOTE: Tasks Summary: Attempted 2022 tasks of
which 2016 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/user/poky/meta-openembedded/meta-nodejs/recipes-devtools/nodejs/nodejs_7.10.0.bb:do_configure
Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR
message shown, returning a non-zero exit code.
I installed python on both the host and on the target
can someone help me?
meta-nodejs is outdated, use nodejs from meta-oe
Related
I need help on creating a custom u-boot recipe for custom board.
I made a custom recipe for u-boot with our custom u-boot source and defconfig
While building iam getting the following error
ERROR: u-boot-cal-1.0-r1 do_compile: oe_runmake failed
ERROR: u-boot-cal-1.0-r1 do_compile: Execution of '/media/calixto-systems/cal_linux/Sethu/yocto/yocto-secure/iec61850_module/iec61850_module3.1/build/tmp/work/iec61850_module-poky-linux-gnueabi/u-boot-cal/1.0-r1/temp/run.do_compile.8827' failed with exit code 1
ERROR: Logfile of failure stored in: /media/calixto-systems/cal_linux/Sethu/yocto/yocto-secure/iec61850_module/iec61850_module3.1/build/tmp/work/iec61850_module-poky-linux-gnueabi/u-boot-cal/1.0-r1/temp/log.do_compile.8827
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4
| HOSTCC scripts/basic/fixdep
| /bin/sh: 1: cc: not found
| make[2]: *** [scripts/Makefile.host:95: scripts/basic/fixdep] Error 127
| make[1]: *** [Makefile:488: scripts_basic] Error 2
| make: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/uboot.release'. Stop.
| make: *** Waiting for unfinished jobs....
| CFGCHK u-boot.cfg
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Execution of '/media/calixto-systems/cal_linux/Sethu/yocto/yocto-secure/iec61850_module/iec61850_module3.1/build/tmp/work/iec61850_module-poky-linux-gnueabi/u-boot-cal/1.0-r1/temp/run.do_compile.8827' failed with exit code 1
ERROR: Task (/media/calixto-systems/cal_linux/Sethu/yocto/yocto-secure/iec61850_module/iec61850_module3.1/meta-iec61850_module/recipes-bsp/u-boot/u-boot-cal.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 580 tasks of which 579 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/media/calixto-systems/cal_linux/Sethu/yocto/yocto-secure/iec61850_module/iec61850_module3.1/meta-iec61850_module/recipes-bsp/u-boot/u-boot-cal.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
What all things i have to consider while writing a u-boot recipe.
The below lines are my recipe for u-boot
DESCRIPTION = "u-boot bootloader for Calixto devices"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
#SRC_URI[md5sum] = "454a496b2ec8fa2cf60f6b2cba299b10"
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
BRANCH ?= "2019.01"
UBOOT_GIT_PROTOCOL = "https"
S = "${WORKDIR}/git"
SRC_URI = "git://sethucalixto#bitbucket.org/calixtolinuxplatform/calixto-am335x-uboot.git;protocol=${UBOOT_GIT_PROTOCOL};branch=${BRANCH}; \
file://am335x_iec61850_module_defconfig"
DEPENDS += "dtc-native bc-native lzop-native flex-native bison-native python3-setuptools-native"
COMPATIBLE_MACHINE = "iec61850-module"
SRCREV = "b96e9f6aed2c0a6cbf08c3f31b917694cc1f1b14"
Have a look at the u-boot recipe in OE-Core. In particular you probably need the EXTRA_OEMAKE lines from u-boot.inc to setup the compiler/linker correctly.
When I try to build any recipe, I am getting this error in a consistent way.
I have tried to build recipes from different layers and different sources and they all fail the same way. This tells me there is some fundamental setup issue.
What am I missing?
I am using External source code path to build and not using Git or tarballs.
Yocto version: Honister.
Initialising tasks: 100% |###################################################################################################################################################################| Time: 0:00:00
Sstate summary: Wanted 9 Local 0 Network 0 Missed 9 Current 133 (0% match, 93% complete)
NOTE: Executing Tasks
ERROR: test-1.0-r0 do_deploy_source_date_epoch: PermissionError(13, 'Permission denied')
ERROR: Logfile of failure stored in: /home/honister/build/tmp/work/cortexa72-cortexa53-poky-linux/test/1.0-r0/temp/log.do_deploy_source_date_epoch.674904
Log data follows:
| DEBUG: Executing python function sstate_task_prefunc
| DEBUG: Python function sstate_task_prefunc finished
| DEBUG: Executing python function create_source_date_epoch_stamp
| DEBUG: No tarball or git repo found to determine SOURCE_DATE_EPOCH
| DEBUG: Using SOURCE_DATE_EPOCH_FALLBACK
| DEBUG: SOURCE_DATE_EPOCH: 1302044400
| DEBUG: Python function create_source_date_epoch_stamp finished
ERROR: test-1.0-r0 do_populate_lic: PermissionError(13, 'Permission denied')
ERROR: Task (/home/honister/yocto/meta-test/recipes-apps/test.bb:do_deploy_source_date_epoch) failed with exit code '1'
ERROR: Logfile of failure stored in: /home/honister/build/tmp/work/cortexa72-cortexa53-poky-linux/test/1.0-r0/temp/log.do_populate_lic.674905
Log data follows:
| DEBUG: Executing python function sstate_task_prefunc
| DEBUG: Python function sstate_task_prefunc finished
ERROR: Task (/home/honister/yocto/meta-test/recipes-apps/test.bb:do_populate_lic) failed with exit code '1'
I am working on migrating from Debian to Yocto. As a result, many of the proprietary packages I am writing recipes for have dependencies on Debian libraries which do not appear to be available directly in Yocto. This might be a rookie question, but I'm trying to figure out how to do this.
Below, I have one of my recipe for a Makefile C project that was generated with recipetool create:
# Recipe created by recipetool
# This is the basis of a recipe and may need further editing in order to be fully functional.
# (Feel free to remove these comments when editing.)
# WARNING: the following LICENSE and LIC_FILES_CHKSUM values are best guesses - it is
# your responsibility to verify that the values are complete and correct.
#
# The following license files were not able to be identified and are
# represented as "Unknown" below, you will need to check them yourself:
# debian/copyright
LICENSE = "Unknown"
LIC_FILES_CHKSUM = "file://debian/copyright;md5=some-hash"
SRC_URI = "git://git#my-project.git;protocol=ssh"
# Modify these as desired
PV = "1.0+git${SRCPV}"
SRCREV = "<...>"
S = "${WORKDIR}/git"
DEPENDS = "systemd"
# NOTE: this is a Makefile-only piece of software, so we cannot generate much of the
# recipe automatically - you will need to examine the Makefile yourself and ensure
# that the appropriate arguments are passed in.
do_compile () {
oe_runmake my-project
}
As you can see, I have specified a dependency on systemd. However, the dependency I really think I need is the Debian package libsystemd.
Whenever I bitbake this recipe, I get the following:
NOTE: Executing Tasks
ERROR: <recipe-name> do_compile: oe_runmake failed
ERROR: <recipe-name> do_compile: Execution of '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/temp/run.do_compile.13271' failed with exit code 1:
make[1]: Entering directory '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/git/src/core'
CC file-name.c
../file-name.c:6:10: fatal error: systemd/sd-daemon.h: No such file or directory
6 | #include <systemd/sd-daemon.h>
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [Makefile:93: build/file-name.o] Error 1
make[1]: Leaving directory '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/git/src/core'
make: *** [Makefile:72: some-recipe] Error 2
WARNING: exit code 1 from a shell command.
ERROR: Logfile of failure stored in: /home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/temp/log.do_compile.13271
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 24 my-project
| make[1]: Entering directory '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/git/src/core'
| CC my-file.c
| ../my-file.c:6:10: fatal error: systemd/sd-daemon.h: No such file or directory
| 6 | #include <systemd/sd-daemon.h>
| | ^~~~~~~~~~~~~~~~~~~~~
| compilation terminated.
| make[1]: *** [Makefile:93: build/my-file.o] Error 1
| make[1]: Leaving directory '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/git/src/core'
| make: *** [Makefile:72: my-project] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Execution of '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/temp/run.do_compile.13271' failed with exit code 1:
| make[1]: Entering directory '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/git/src/core'
| CC my-file.c
| ../my-file.c:6:10: fatal error: systemd/sd-daemon.h: No such file or directory
| 6 | #include <systemd/sd-daemon.h>
| | ^~~~~~~~~~~~~~~~~~~~~
| compilation terminated.
| make[1]: *** [Makefile:93: build/my-file.o] Error 1
| make[1]: Leaving directory '/home/mitch/bin/yocto/project-name/build/tmp/work/armv7vet2hf-neon-poky-linux-gnueabi/recipe-name/1.0+gitAUTOINC+...-r0/git/src/core'
| make: *** [Makefile:72: my-recipe] Error 2
| WARNING: exit code 1 from a shell command.
|
ERROR: Task (/home/mitch/bin/yocto/project-name/layers/meta-project/recipes-main/my-recipe/my-recipe_git.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2166 tasks of which 2163 didn't need to be rerun and 1 failed.
To summarize, what this looks like is my project requires libraries provided by systemd. What am I missing here that would allow me to get this project to build? Is there a way to build it?
Okay, so I guess I was overthinking this. Yocto uses your system to compile the project. So, all I needed to do was provide the systemd header files on my host machine. Since I am running Ubuntu, installing libsystemd-dev on my host fixed the issue. I think that the DEPENDS on systemd will still be required for running on the Yocto system.
during the bitbake for my Renesas board (H3SK) I get this error message about an fatal error that the cherry-pick failed during overwriting local changes. I tried to search in Google for some answers, but no success. Can anybody solve this problem?
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: optee-os-3.1.0+renesas+gitAUTOINC+c3f73c1e86_e770203965-r0 do_configure: Function failed: do_configure (log file is located at /home/costa/AUTOSAR/build-ara-renesas/build/tmp/work/h3ulcb-poky-linux/optee-os/3.1.0+renesas+gitAUTOINC+c3f73c1e86_e770203965-r0/temp/log.do_configure.5063)
ERROR: Logfile of failure stored in: /home/costa/AUTOSAR/build-ara-renesas/build/tmp/work/h3ulcb-poky-linux/optee-os/3.1.0+renesas+gitAUTOINC+c3f73c1e86_e770203965-r0/temp/log.do_configure.5063
Log data follows:
| DEBUG: Executing shell function do_configure
| Reset branch 'official'
| M core/lib/libtomcrypt/src/ciphers/aes_armv8a_ce.c
| M core/lib/libtomcrypt/src/ciphers/aes_modes_armv8a_ce_a64.S
| error: Your local changes would be overwritten by cherry-pick.
| hint: Commit your changes or stash them to proceed.
| fatal: cherry-pick failed
| WARNING: exit code 128 from a shell command.
| ERROR: Function failed: do_configure (log file is located at /home/costa/AUTOSAR/build-ara-renesas/build/tmp/work/h3ulcb-poky-linux/optee-os/3.1.0+renesas+gitAUTOINC+c3f73c1e86_e770203965-r0/temp/log.do_configure.5063)
ERROR: Task (/home/costa/AUTOSAR/build-ara-renesas/meta-renesas/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4753 tasks of which 4750 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/costa/AUTOSAR/build-ara-renesas/meta-renesas/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb:do_configure
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
I tried to create a Linux image based on "yocto project mega Manuel".But I got an error in building image step.
I followed the mega Manuel.
I'm using Ubuntu 18.04.1 LTS.
Error:
aju#aju-HP-15-Notebook-PC:~/poky/build$ bitbake core-image-sato
WARNING: Host distribution "Ubuntu-18.04" has not been validated with this version of the build system; you may possibly experience
unexpected failures. It is recommended that you use a tested
distribution.
Parsing recipes: 100% |#########################################| Time: 00:00:49
Parsing of 899 .bb files complete (0 cached, 899 parsed). 1330 targets, 38 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
Build Configuration: BB_VERSION = "1.28.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-18.04" TARGET_SYS = "i586-poky-linux" MACHINE = "qemux86" DISTRO = "poky" DISTRO_VERSION = "2.0.3" TUNE_FEATURES = "m32 i586"
TARGET_FPU = "" meta meta-yocto
meta-yocto-bsp = "jethro:331275422b2c3f326f605c23ae89eedb4e222eb5"
NOTE: Preparing RunQueue NOTE: Executing SetScene Tasks NOTE:
Executing RunQueue Tasks ERROR: oe_runmake failed ERROR: Function
failed: do_compile (log file is located at
/home/aju/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.301)
ERROR: Logfile of failure stored in:
/home/aju/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.301
Log data follows: | DEBUG: Executing shell function do_compile | NOTE:
make -j 4 | : && /bin/mkdir -p doc && {
PATH='/home/aju/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH
&& export PATH; } && /usr/bin/perl
/home/aju/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/automake-1.15/doc/help2man
--output=doc/automake-1.15.1 automake-1.15
| help2man: can't get --help' info from automake-1.15
| Try--no-discard-stderr' if option outputs to stderr
| Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
| make: *** [doc/automake-1.15.1] Error 255
| WARNING: exit code 1 from a shell command.
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (log file is located at /home/aju/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.301)
ERROR: Task 403 (virtual:native:/home/aju/poky/meta/recipes-devtools/automake/automake_1.15.bb,
do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 73 tasks of which 53 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:
Summary: 1 task failed: virtual:native:/home/aju/poky/meta/recipes-devtools/automake/automake_1.15.bb,
do_compile Summary: There was 1 WARNING message shown. Summary: There
were 2 ERROR messages shown, returning a non-zero exit code.
Is it the problem with this latest version or is it something else?
Why are you using such an old release of Yocto? 2.0.x was first released in 2015 and isn't supported on modern distributions. If you need to use 2.0.x then you can pick a patch from a recent release to fix autoconf, but I really do recommend using 2.5 (or 2.6, due to release any day now) instead.