My requiremnt is to put some filters on smartTable form my controller.
In Event beforeRebindTable i am using the following code to put filter using this code which is working fine.
onBeforeRebindTable: function (oEvent) {
var oBindingParams = oEvent.getParameter("bindingParams");
statFilter = new sap.ui.model.Filter("Claim_TYPE", "EQ", "1234");
oBindingParams.filters.push(statFilter);
}
But the problem is when the user is clicling on table column on filter again, the filter i am adding in above code is not visible in the selection dialog. User may need to delete this filter, If its not visible in dialog they wont be able to delete it.
I am not able to establish the link why the dialog is not getting updated, or should i add this somewhere else.
Thanks
Sonal.
onBeforeRebindTable: function (oEvent) {
var oSmartTable = oEvent.getSource();
if (this._isOnInit == null) this._isOnInit = true;
if (this._isOnInit) {
oSmartTable.applyVariant(
{
filter: {
filterItems: [{
columnKey: "YourSelectedColumn",
exclude: false,
operation: "EQ",
value1: "SomeEnteredValue",
value2: ""
}]
}
}
);
this._isOnInit = false;
}
}
Related
This is my first post to Stack, appreciate the work you guys do, amazing.
I have a sap.m.table sap ui5 and i have 4 records
out of 4, 2 are selected by default, i want to disable the preselected once based on condition.
I have tried below code but its not working, any input please?
View
/results' }" **mode="MultiSelect"**
Controller logic
//--->disable the selected department checkboxes
var tbl = that.getView().byId('idImpactTable');
var header = tbl.$().find('thead');
var selectAllCb = header.find('.sapMCb');
selectAllCb.remove();
tbl.getItems().forEach(function(r) {
var obj = r.getBindingContext("impactModel").getObject();
var oStatus = obj.COMPLETED;
var cb = r.$().find('.sapMCb');
var oCb = sap.ui.getCore().byId(cb.attr('id'));
if (oStatus === "X") {
oCb.setSelected(true);
oCb.setEnabled(false);
} else {
oCb.setEnabled(false);
}
});
Multiselect Mode Table - Make selected check box read only
Last time I tried this I found it easiest to use the updateFinished event on the table, and then use an internal property of the column list item, like so:
onTableUpdateFinished: function (oEvent) {
oEvent.getSource().getItems().forEach(function (item) {
var data = item.getBindingContext().getObject();
item._oMultiSelectControl.setEnabled(!data.IsEnabled); //whatever your check is
});
}
You'll have to find a way to keep them disabled though when using the Select All checkbox at the top of the table. I ended up extending sap.m.Table to accomplish that, there might be easier ways...
My extension is like this
sap.ui.define([
"sap/m/Table"
], function(Control) {
return Control.extend("myapp.controls.MyTable", {
updateSelectAllCheckbox: function(oEvent) {
if (this._selectAllCheckBox && this.getMode() === "MultiSelect") {
var aItems = this.getItems();
var iSelectedItemCount = this.getSelectedItems().length;
var iSelectableItemCount = aItems.filter(function(oItem) {
//standard table does not check if the item is enabled
return oItem.getSelected() || oItem._oMultiSelectControl.getEnabled();
}).length;
// set state of the checkbox by comparing item length and selected item length
this._selectAllCheckBox.setSelected(aItems.length > 0 && iSelectedItemCount === iSelectableItemCount);
}
}
});
});
And just the standard renderer
sap.ui.define([
"sap/m/TableRenderer"
], function(Control) {
return Control.extend("myapp.controls.MyTableRenderer", {
});
});
I suppose I could have extended the ColumnListItem but that was more effort than I wanted to put into the table extension
I have managed to find the solution, please find sample code to achieve.
//--->disable the selected department checkboxes
var tbl = that.getView().byId("idImpactTable");
var header = tbl.$().find("thead");
var selectAllCb = header.find(".sapMCb");
selectAllCb.remove();
var aItems = that.byId("idImpactTable").getItems();
//---> Check individual item property value and select the item
aItems.forEach(function(oItem) {
debugger;
//---> If using OData Model items Binding, get the item object
var mObject = oItem.getBindingContext().getObject();
var sPath = oItem.getBindingContextPath();
var completed = oItem.oBindingContexts.impactModel.getProperty("COMPLETED");
//--->get the id of Multi Checkbox
var cb = oItem.$().find(".sapMCb");
var oCb = sap.ui.getCore().byId(cb.attr("id"));
if (completed === "X") {
oCb.setEditable(false);
oItem.setSelected(true);
oItem.getCells()[4].setEnabled(false);
} else {
oItem.setSelected(false);
}
});
Thank you,
Jacob.Kata
//--->disable the selected department checkboxes
var tbl = that.getView().byId('idImpactTable');
tbl.getItems().forEach(function(r) {
// this makes the trick --->
var oMultiSelCtrl = r.getMultiSelectControl();
oMultiSelCtrl.setDisplayOnly( true );
});
I am relatively new to AEM and I am trying to hide/show dialog fields on checkbox click. I have tried some ways but failed to achieve this functionality. This is just for my own learning. How can I achieve this?
I have tried adding the js clientlib and adding some classes and target to the checkbox and target fields respectively as suggested in other answers but it didn't seem to work. Please help.
First you need to create a clientLibs and add categories as cq.authoring.dialog.all, see the code below:
(function($, $document) {
$document.on("dialog-ready", function() {
Coral.commons.ready($document, function () {
dispalyOrHideTabs();
$(document).on('change', '#showText', function() {
if($('#showText').attr('checked')){
show('1');
}else{
hide('1');
}
});
$(document).on('change', '#showTable', function() {
if($('#showTable').attr('checked')){
show('2');
}else{
hide('2');
}
});
function hide(index){
var tab = $document.find("[id='compareImgId-"+index+"']").closest(".coral3-Panel");
var tab2 = tab.attr("aria-labelledby");
var tab3 = $document.find("[id='"+tab2+"']");
tab3.addClass("hide");
}
function show(index){
var tab = $document.find("[id='compareImgId-"+index+"']").closest(".coral3-Panel");
var tab2 = tab.attr("aria-labelledby");
var tab3 = $document.find("[id='"+tab2+"']");
tab3.removeClass("hide");
}
function dispalyOrHideTabs(){
var editable = Granite.author.DialogFrame.currentDialog.editable;
if(editable){
var node = Granite.HTTP.eval(Granite.author.DialogFrame.currentDialog.editable.path + ".json");
if(node){
var storedTextValue = node.showText;
var storedTableValue = node.showTable;
if(storedTextValue){
show('1');
}else{
hide('1');
}
if(storedTableValue){
show('2');
}else{
hide('2');
}
}
}
}
});
});
})($, $(document));
Add granite:id property as showText of the checkbox resource type.
And below is the dialog tabs which will be hidden and shown:
I used SmartTable with the property initiallyVisibleFields. I bound ODataModel to it. The problem is when I want to show all fields of ODataModel, e.g. after I click on SmartTable's row and try to display it in the dialog. I just see fields from initiallyVisibleFields property. It looks like ODataModel is filtered with initiallyVisibleFields property.
I was thinking about JSONModel where I put copy of ODataModel before it is bind to SmartTable, but I am planning to use SmartFilterBar, so index of shown data in the table will be changed after filtering. So I can not simply pull data from JSONModel. I can still filter data from JSONModel based on the fields I get from
ODataModel filtered with initiallyVisibleFields but there I can still get different data, because there can be differences in the fields which are hidden.
Please, can you advice me how to solve this issue?
Thanks for any tips.
...
return Controller.extend("ABC.View1", {
oDialog: null,
onInit: function() {
var oModel, oView;
oModel = new ODataModel("/sap/opu/odata/sap/ABC/", {
useBatch: false
});
oView = this.getView();
oView.setModel(oModel);
this._createSmartTable();
},
_createSmartTable: function() {
var oSmartTable = new SmartTable('idSmartTable',{
entitySet: "ABCListSet",
tableType: "ResponsiveTable",
sStyleClass: "sapUiResponsiveContentPadding",
initiallyVisibleFields: "A,B,C,D",
showRowCount: false,
enableAutoBinding: true,
demandPopin: false,
useVariantManagement: false,
useExportToExcel: false,
useTablePersonalisation: true,
});
// Register event row click
var that = this;
var oTable = oSmartTable.getTable();
oSmartTable.attachDataReceived(function() {
var aItems = oTable.getItems();
if (aItems.length === 0) return;
$.each(aItems, function(oIndex, oItem) {
oItem.detachPress(that._createDialog);
oItem.setType("Active");
oItem.attachPress(that._createDialog);
});
});
var oVBox = new VBox();
oVBox.addItem(oSmartTable);
var oPage = this.getView().byId("idPage");
oPage.addContent(oVBox);
},
_createDialog: function(oEvent) {
//HERE I the oEvent has data filtered by initiallyVisibleFields property of Smarttable.
},
});
...
Do I understand you correctly that you want to show the complete entry in a dialog? The SmartTable uses $select statements to only load the fields of an entity that are also shown in the table. If you want to load all, I think you should add them in the requestAtLeast property.
I'm using Ajax Autocomplete for Jquery (https://www.devbridge.com/sourcery/components/jquery-autocomplete/) with DataTables to search on a specific column.
Using onSearchComplete and onSelect from Autocomplete I can filter both the input and the table together as the user is typing (onSearchComplete) and when they select an entry (onSelect):
$("#scoreboard_site_name_filter").autocomplete({
serviceUrl: "/wiki/extensions/CFBHA/models/_mSiteNames.php",
onSearchComplete: function(suggestion) {
update_scoreboard_by_site_name_filter(suggestion);
},
onSelect: function(suggestion) {
update_scoreboard_by_site_name_filter(suggestion);
}
});
function update_scoreboard_by_site_name_filter(suggestion) {
var colname = "site_name:name";
if (scoreboard.column(colname).search() !== suggestion) {
scoreboard.column(colname).search(suggestion).draw();
}
};
However, when the input is deleted, then the DataTable is left filtered on the last input because neither event is fired in that case.
I've tried the keyup and change events on the input itself to pass an empty string to the DataTable search:
$("#scoreboard_site_name_filter").on("keyup change", function() {
var suggestion = "";
update_scoreboard_by_site_name_filter(suggestion);
});
If I place it before the autocomplete then it has no affect and if I place it after then of course I lose the ability to filter the table as I type because it fires after the autocomplete.
How can I detect when the input has been deleted and then re-filter the table on an empty string (i.e., clear that filter)?
OK, I was overthinking it . . .
I removed the onSearchComplete event and just went with the input event on the input itself and everything is working great.
I left the onSelect for the Autocomplete and am now properly passing suggestion.value instead of suggestion.
Here's the proper code for anyone interested:
$("#scoreboard_site_name_filter").on("keyup change", function() {
update_scoreboard_by_site_name_filter(this.value);
});
$("#scoreboard_site_name_filter").autocomplete({
serviceUrl: "/wiki/extensions/CFBHA/models/_mSiteNames.php",
onSelect: function(suggestion) {
update_scoreboard_by_site_name_filter(suggestion.value);
}
});
function update_scoreboard_by_site_name_filter(suggestion) {
var colname = "site_name:name";
if (scoreboard.column(colname).search() !== suggestion) {
scoreboard.column(colname).search(suggestion).draw();
}
};
Additionally I updated the code to make the search regex if the suggestion is actually selected (clicked on or entered on) and to add a class to the input as an indicator that the table is now filtered on that exact search term:
$("#scoreboard_site_name_filter").on("input", function() {
update_scoreboard_by_site_name_filter(this.value, false);
});
$("#scoreboard_site_name_filter").autocomplete({
serviceUrl: "/wiki/extensions/CFBHA/models/_mSiteNames.php",
onSelect: function(suggestion) {
update_scoreboard_by_site_name_filter(suggestion.value, true);
}
});
function update_scoreboard_by_site_name_filter(suggestion, selected) {
var colname = "site_name:name";
if (!selected) {
scoreboard.column(colname).search(suggestion).draw();
$("#scoreboard_site_name_filter").removeClass("autocomplete-input-selected");
} else {
scoreboard.column(colname).search("^" + suggestion + "$", true, false).draw();
$("#scoreboard_site_name_filter").addClass("autocomplete-input-selected");
};
};
I'm trying to extend the kendo-ui autocomplete control: I want the search start when te user hit enter, so basically I've to check the user input on keydown event.
I've tried to catch the keydown event with this code:
(function($) {
ui = kendo.ui,
Widget = ui.Widget
var ClienteText = ui.AutoComplete.extend({
init: function(element,options) {
var that=this;
ui.AutoComplete.fn.init.call(this, element, options);
$(this).bind('keydown',function(e){ console.log(1,e); });
$(element).bind('keydown',function(e){ console.log(2,e); });
},
options: {
[...list of my options...]
},
_keydown: function(e) {
console.log(3,e);
kendo.ui.AutoComplete.fn._keydown(e);
}
});
ui.plugin(ClienteText);
})(jQuery);
None of the binded events gets called, only the _keydown, and then I'm doing something wrong and cannot call the autocomplete "normal" keydown event.
I've seen a lot of examples that extend the base widget and then create a composite widget, but I'm not interested in doing that, I only want to add a functionality to an existing widget.
Can someone show me what I'm doing wrong?
Thank you!
What about avoiding the extend and take advantage of build in options and methods on the existing control : http://jsfiddle.net/vojtiik/Vttyq/1/
//create AutoComplete UI component
var complete = $("#countries").kendoAutoComplete({
dataSource: data,
filter: "startswith",
placeholder: "Select country...",
separator: ", ",
minLength: 50 // this is to be longer than your longest char
}).data("kendoAutoComplete");
$("#countries").keypress(function (e) {
if (e.which == 13) {
complete.options.minLength = 1; // allow search
complete.search($("#countries").val());
complete.options.minLength = 50; // stop the search again
}
});
This code actually work:
(function($) {
ui = kendo.ui,
ClienteText = ui.AutoComplete.extend({
init: function(element,options) {
ui.AutoComplete.fn.init.call(this, element, options);
$(element).bind('keydown',function(e){
var kcontrol=$(this).data('kendoClienteText');
if (e.which === 13) {
kcontrol.setDataSource(datasource_clientes);
kcontrol.search($(this).val());
} else {
kcontrol.setDataSource(null);
}
});
},
options: {
name: 'ClienteText',
}
});
ui.plugin(ClienteText);
})(jQuery);
but I don't know if it's the correct way to do it.