I've been messing around with several IDEs (eclipse, netbeans, PHPStorm) and I have run into a strange problem. Every time I visit http://localhost:8000/ I see the page from just one of the several projects I've been working on. It's like a redirect has been set up somehow but I have no idea where, or how to change it.
I'm on Windows 10.
Could someone please explain what could be causing this?
It turns out some process was using port 8000. I don't know how that happened - I'm guessing one of the IDEs didn't clean up properly when closed. It was solved by this answer: How do I kill the process currently using a port on localhost in Windows?
Related
I'm having a hard time using eclipse because of the following issue.
It goes like this. I'll code and try to run it. Then, it will throw some errors (of any kind). And so, after I have changed a part of the code, comment out which codes I suspect makes the error, or delete something, I then restart the websphere application server in order to republish my work. Next is to test my work using SoapUI then all of a sudden eclipse throws an error which is the same as before. I've tried to search in here answers to this questions but it involves codes which don't need in my project and also answers that I can't understand well (since I am very new to programming). However, I have found a way to resolve this but it's very inconvenient. To be able for eclipse to detect changes in the src folder, I should restart eclipse after editing my codes then remove my project in the server, start the server and then publish my work in websphere all over again. It solves my problem but I do all of these stuff every now and then even if I only comment out a single line in the code. What I want is to avoid doing this process of resolving the issue since it consumes so much of my time whenever I republish the project in the server.
Can somebody help me with this? Any suggestions would be very helpful. Thanks a lot!
It is a bit strange that you need to restart eclipse. The normal way would be to just re run your application server.
Try only he 3 second steps you mentioned (remove my project in the server, start the server and then publish my work in websphere) and if that works try again without removing the project. Just restart the servers.
And let us know if that worked!
My Netbeans has been insanely fast for over 2 years, until this morning. Something strange, however, is now happening. Every time i press "copy and paste" ... so CTRL-C, it goes slow. This is what I see:
So, the moment I press CTRL-C, that shows in the bottom, my entire machines goes into super slow mode, and then 5 seconds later it stops.
I've considered maybe there's a keylogger on my machine, but can't find anything. And it's only slow when I copy and paste from Netbeans, nothing else. Maybe Netbeans is sending data out some other way?
Any ideas why Netbeans would just go slow like this?
UPDATE
I only have one project open
I've disabled the git and subversion plugins
I am working on a Laravel project
It's slow when I copy from a VIEW or when I copy from a CONTROLLER (I know css files often go a bit slow because of Parsing, so I figured mentioning this is probably worthwhile)
I followed the advice at the end of this article: here and uninstalled "BlueStacks". Problem solved.
UPDATE
Just in case the article gets deleted, here is the advice the user gives on that page:
I meet the same problem. When I copy a word in the IDE, the IDE does not response until 2 or 3 seconds. I did not confront this problem until few days ago. I try to use the latest netbeans and the latest jdk, but that does not work. Then I find someone said http://bugs.java.com/bugdatabase/view_bug.do?bug_id=5078787 is the problem. And the problem is somewhat about the COM in windows. So I try to install the netbeans to another Win7 PC, and the problem is gone. In that case, I guess the problem is not the netbeans, but some other application in windows. Later I uninstall some of the application I just installed few days ago. And the IDE works right now. The applications I uninstalled is "imc studio" "imc license manager" and "blueStacks" an android simulator. I guess these application may have influence to the COM of Win7. Hope my solution will help to this bug.
You can also just stop the BlueStacks Agent process from Task Manager while you're using NetBeans.
Is there a way to set what port Eclipse uses for its local help server (e.g. localhost:64219/help/index.jsp)? I would like to bookmark specific pages, but I obviously can't since the port changes each time it runs.
I personally think its crazy they don't just try a common port # and then work up from there so there is consistency not just for a given user, but across users. That would make it possible to share local help links with coworkers.
I found this help article on running a standalone Information Center that says you can -port, but that doesn't seem to work with Eclipse itself (I tried adding it to eclipse.ini).
In current Kepler release it can be changed by adding
-vmargs
-Dserver_port=8089
in config.ini
I searched lot about this topics but can't find a proper solution.
I am using eclipse 3.6 Helios version with operating system fedora15. In my application I am using GWT2.4 for front end development.
Now while I work with debug mode and want to debug at some point at the same time eclipse hangs for 3-4 mins.It resumes after and again start to debug process.
I am using this eclipse from last 3 years with windows but not faced this issue.In fedora I am using it from last 4 months and this problems stated to occur from last one month.
I am not getting what is the issues with eclipse.
Please help me out.
Thanks in advance.
Is this something that happens with different projects/code, or is it the same code that causes freezes? I've had issues where threads have started in the background and caused problems.
You say "(...) hangs for 3-4 mins.It resumes after and again start to debug process.", what do you mean? Does it continue to debug and move to the next line, or is there a crash and it restarts?
How long has it been since you changed workspace? I've found this, rather than the Eclipse installation, to be an issue over time. Create a new workspace folder, export all your projects and preferences and start fresh.
You are using GWT 2.4 and I think you might be working with UI.xml too... There is a tag in each ui.xml at the top like
<!DOCTYPE ui:UiBinder SYSTEM "http://dl.google.com/gwt/DTD/xhtml.ent">
Which means eclipse is going to get that xhtml.ent file each time and there is a issue in GWT eclipse plugin have a look to below link
http://code.google.com/p/google-web-toolkit/issues/detail?id=5265
There is one comment which says
For me, removing
SYSTEM "http://dl.google.com/gwt/DTD/xhtml.ent"
and saving the document,
solves the problem..
maybe it is needed for something, so better you copy that locally somewhere, and link that.
Try it out and let me know.
I had experienced the exact same problem on a less-powerful notebook I had to use.
Try one of the following
Download the latest Eclipse version (It needs, just as helios, a lot of RAM and CPU because it's based on a new "architekture", in contrast to, for instance, galileo)
Make sure you are using the latest JDK and JRE
Download Eclipse Galileo, which does require pretty less resources and goes still very very fine with most projects!
It sounds like you are experiencing the features of the latest Eclipse arch. In the latest versions of Eclipse I have noticed that the more plugins and add-ons you have installed, the slower the environment runs. There are a lot of similar posts regarding performance on the new platform
I have removed all but the plugins I am using and never install anything not needed into the Eclipse environment.
I "may" have experience this. Not sure. Suddenly started working again. I was getting a hang every time I would try to debug an app, in the part of the code (inside GWT) that creates a "table" element. Could be that there is something that just takes a while and you just have to "wait it out" the when it happens. Go get a cup of coffee, type thing. anyway I HAD stepped deep into the GWT code, plenty so I'm convinced it IS a GWT issue of some kind.
I was thinking it was some infinite recursion possibly in the logging system (like logger code accidentally trying to log itself, and going into loop?). Also there's a 50/50 chance that it was simply clicking on 'run' instead of 'debug' made it start working again. So at least try that if you have problems. My gut instinct and 30yrs programming under my belt tells me it's logger related. I can rule out "slow computers" because I never had this happen until I got a new machien which is Dell XPS, Core i7, 8 GB ram, and massive disk. So I wouldn't blame hardware, or Eclipse bloat.
I am using Microsoft Robotics Studio for a school project and I am getting a strange error when I try to run the Visual Simulation Environment. It was working fine until yesterday and then suddenly it gave me a runtime error saying "Illegal command line arguments... do not use VPLHost directly, use dsshost instead to run a manifest" But I am only clicking on Run in VPL/DSS Manifest editor.
I am running MRDS as administrator and I even tried re-installing MRDS but it is still showing the same MS VPL Runtime error. I tried to search online, but cannot find any suitable solution.
I already tried running the existing samples, I.e. Urban Environment, Multiple Simulated Robots etc. but it still gives me the same error. The strange thing is that it was working perfectly one minute, and then started giving me this error message the next minute, when I had not changed anything in between. In fact, I had wanted to change something in my manifest, so I closed the running VPL application, closed VPL and opened DSS manifest editor, and ran my manifest and that is when I got this error.
What is going wrong? Is some MRDS script using vplhost32.exe instead of dsshost? If so, then where and how do I change it?
I tried running the urban envrionment manifest from the command prompt and Using DSSHost32 directly. This time, it didn't give me a runtime error but an intiialization error. I tried changing port numbers but it still doesn't work. I have deleted many files from my computer to free space (JIC) and it still doesn't work. The window just doesn't open even when I hover over it in Windows 7.
The error message looks like this: Only one usage of each socket address (protocol/network address/port) is normally permitted."
This was even after I checked netstat for free ports and tried but I get this error message. Its either this one or the "Don't use VPLHost directly" if I run it through VPL or DSS Manifest Editor.
Could it be that some external services are interfering with DSSHost/VPLHost? Are there any such services which I could try killing? ANY help/suggestion would help right now as my project is due Thursday and this is a really unfortunate time for it to be acting up like this.
Does the problem reproduce after logging off & logging back on? It's likely that you had a process hanging around that you weren't aware of. Logging off should shut down any processes you personally started.
I don't know the solution of your problem, but it would be better that you post your question on the link below:
http://p2p.wrox.com/book-professional-microsoft-robotics-studio-isbn-978-0-470-14107-6-410/
[official forum for the book : Professional Microsoft Robotics Studio], i hope you will shortly get reply there,
The other option is to post your question on the msdn forum,
http://social.msdn.microsoft.com/Forums/en-US/category/robotics
hope this would help....