Has anybody successfully run the AWS CloudWatch Logs Agent on a Raspberry Pi 4?
When I run the script below, it appears to work, but the awslogs.service does not get created.
curl https://s3.amazonaws.com//aws-cloudwatch/downloads/latest/awslogs-agent-setup.py -O
I suspect it simply isn't compatible, so I what to see if anybody else had success. Any other suggestions for centralized logging for a Raspberry Pi cluster?
I ended up re-imaging my Raspberry Pi 4 with the 64 bit Raspberry Pi OS, at which point I was able to follow the instructions to download and install the .deb file for ARM64 Ubuntu on https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/download-cloudwatch-agent-commandline.html.
cd /opt
wget https://s3.amazonaws.com/amazoncloudwatch-agent/ubuntu/arm64/latest/amazon-cloudwatch-agent.deb
sudo dpkg -i -E ./amazon-cloudwatch-agent.deb
Related
I am working on raspberry pi 4 and install a yocto linux image on that.
Is there any way to add xrdp server in yocto warrior branch?
I have added recepie from meta-openembedded/meta-oe/recepie-support/rxdp/
In final image but can't get remote desktop of raspberry pi
please find logs from here
logs of journalctl command
Thanks
Margish
IMAGE_INSTALL += " xrdp "
I'm running Raspbian GNU/Linux 7 (wheezy) on my Raspberry Pi.
Can I install the Ubuntu IBM Secure Gateway client?
pi#raspberrypijps1 ~ $ sudo dpkg -i ibm-securegateway-client-1.4.1+client_amd64.deb
dpkg: error processing ibm-securegateway-client-1.4.1+client_amd64.deb (--install):
cannot access archive: No such file or directory
Errors were encountered while processing:
ibm-securegateway-client-1.4.1+client_amd64.deb
Secure Gateway is available for i386, s390x and ppc64el architecture. Unfortunately, we do not have one for ARM architecture.
I'm trying to Kernel Debug Raspberry PI3 using Bus Pirate, I've followed the instructions to connect them, and also the steps from
(https://developer.microsoft.com/en-us/windows/iot/docs/Windbg.htm)
However everytime I run the following command
windbg.exe -k com:port=com3,baud=921600
but once I restart I get "waiting to reconnect..." and nothing happens?
Any advice, have you come across this problem? My target is a PI3 and using the latest, 10.0.14393.693 version of Win 10 IoT Core.
Solved this by running the following on Raspberry PI
bcdedit /dbgsettings serial debugport:1 baudrate:115200
On the Host machine running the baudrate of the following
C:\Program Files (x86)\Windows Kits\10\Debuggers\x86>windbg.exe -k com:port=COM3,baud=921600
Earlier, I worked with APM 2.6 with Raspberry Pi B+, Raspberry Pi A+ and all works fine.
Now I try to connect APM 2.6 to Raspberry Pi 3 and Raspberry Pi Zero and I obtained the next problem:
I tried to connect with USB port and the command
sudo mavproxy.py **--master=/dev/ttyACM0** --baudrate=115200 --out=127.0.0.1:5005 --cmd="wp load mission.txt"
I tried to connect with telem port and the command
sudo mavproxy.py **--master=/dev/ttyAMA0** --baudrate=57600 --out=127.0.0.1:5005 --cmd="wp load mission.txt"
and
sudo mavproxy.py **--master=/dev/ttyS0** --baudrate=57600 --out=127.0.0.1:5005 --cmd="wp load mission.txt"
I always see the next result:
pi#raspberrypi:~/f1/go $ sudo mavproxy.py --master=/dev/ttyACM0
--baudrate=115200 --out=127.0.0.1:5005 --cmd="wp load mission.txt"
Connect /dev/ttyACM0 source_system=255
**Loaded 5 waypoints from mission.txt**
Log Directory:
Telemetry log: mav.tlog
MAV> Waiting for heartbeat from /dev/ttyACM0
So, MAVProxy writes, that waypoints are loaded, but, when I check it using Mission Plans I can't see points. It writes that points are loaded, but they are not.
Help me please to find the solution.
Just did a fresh install of GitLib on a raspberry pi (original) running Raspbian.
wget https://s3-eu-west-1.amazonaws.com/downloads-packages/raspberry-pi/gitlab_7.9.0-omnibus.pi-1_armhf.deb
sudo dpkg -i gitlab_7.9.0-omnibus.pi-1_armhf.deb
When I try and run sudo gitlab-ctl reconfigure it runs for maybe 5 seconds, then just exists with status code 1. No error message or output.
Any ideas?