Connection failed with psql and pgadmin4 - postgresql

I use postgres 11, I just try to connect with one of my user to psql and pgadmin4
my pg_hba.conf file
# "local" is for Unix domain socket connections only
local all all peer
host sito lcm_admin 127.0.0.1/32 md5
host sito sito_lcm 127.0.0.1/32 md5
My postgres user have a password.
I tried my posgres user, sito_lcm and lcm_admin to connect to pgAdmin4, alway get
Invalid username or password
I know there are good because It's the one I use to connect to posgres db in a java program
for psql i tried
su - postgres
typed my password
authentication fail
tried with one of my db user
psql -U lcm_admin sito
psql: FATAL: Peer authentication failed for user "lcm_admin"
Edit
With Daniel Vérité tips, I can connect to psql but not to pgAdmin4
First time i see this screen, my last connection was a few month ago, don't know if some updated had created this issue

Because of this rule in pg_hba.conf
host sito lcm_admin 127.0.0.1/32 md5
You probably want to invoke psql that way:
psql -U lcm_admin -h 127.0.0.1 sito
Then it will ask for a password instead of failing with "Peer authentication failed".
Note that rules in pg_hba.conf are tested in their order in the file (top to bottom), and it stops at the first one that matches.
About connectiong with pgAdmin4:
As mentioned in https://www.pgadmin.org/docs/pgadmin4/latest/getting_started.html there is an additional step to access pgAdmin4 itself, as an application.
In a server deployment, an email address and password are asked at installation time. If you don't remember the password but you gave a valid email address, the link "Forgotten your password" might work for you.
Otherwise I guess reinstalling pgAdmin4 from scratch might work too.
Personally, I launch pgAdmin4 as a docker container without a persistent volume:
$ docker run -p8080:80 -e PGADMIN_DEFAULT_EMAIL=foo#example.com -e PGADMIN_DEFAULT_PASSWORD=bar dpage/pgadmin4
Then I connect to http://localhost:8080 and the email/password to enter on the first page are those environment variables passed on the command line.

Related

Password Error when logging into POSTGRES on my MAC

I am having an issue that has been bothering me for some time now. It is with postgres on my mac. I set a password for postgres and I can not remember it for some reason. I have looked up and attempted several different methods for trying to reset the password but none of them are working and I need it fixed as soon as possible.
Here is what my pg_hba.conf file
# TYPE DATABASE USER ADDRESS METHOD
local all all trust
I reset the local all all trust and then restarted my postgres server running
brew services restart postgres
and when i go to try and open postgres on my terminal I get the same password issue:
omars-MacBook-Pro:postgres omarjandali$ psql -U postgres -W -h localhost
Password:
psql: error: could not connect to server: FATAL: password authentication failed for user "postgres"
or
omars-MacBook-Pro:~ omarjandali$ psql -h 127.0.0.1 -U postgres
Password for user postgres:
psql: error: could not connect to server: FATAL: password authentication failed for user "postgres"`
You only configured "local" connections which are using Unix domain sockets. But your psql command line tries to establish a TCP connection (-h ...), which is not configured in your pg_hba.conf.
You need to use host instead of localin pg_hba.conf to allow trusted, non-password connections through TCP.
But that is a really, really bad idea, because that means that as soon as your Mac is visible on the internet, everybody can connect to your Postgres instance and hack it. This isn't a theoretical threat - there have been numerous posts on this site regarding that.
If you want to allow connections without passwords, at least only allow them from "localhost", not from the outside:
# TYPE DATABASE USER ADDRESS METHOD
host all all samehost trust

Is Postgres Ignoring the "trust" in pg_hba.conf File?

I have the following lines in my pg_hba.conf file:
host all all 127.0.0.1/32 trust
host all all ::1/128 trust
host all all localhost trust
and I've restarted Postgres. When I connect at the command line everything works as expected:
$ psql -U me -W
Password for user me: # I can type any password and it will work
psql (9.5.7)
Type "help" for help.
me=#
However, when I connect through a software library (the Node library pg, through the library knex) I get an error:
password authentication failed for user "me"
I'm not specifically looking for a fix, I'm just trying to understand how this is even possible. If I just told Postgres to trust anyone, how can I still be getting errors about authentication failing? Was there something wrong with my pg_hba.conf entries, or does Postgres just choose to ignore them under certain circumstances, or ....
EDIT
In case it helps the database connection URL my program is using to connect is:postgres://localhost:5432/mydb.
When you did psql -U me -h localhost, psql failed to connect because it doesn't know what database to connect to.
Solution is psql -U me -h localhost -d database_name
Hope this helps.

Cannot login to PostgreSQL when I specify "-h localhost"

I use Ubuntu 14.10 and installed PostgreSQL 9.2 from PostgreSQL official apt repository. (apt.postgresql.org)
When I switched user postgres and try following command, I can successfully login.
$ psql -U postgres dbname -W
Password for user postgres: (Enter Password)
psql (9.2.9)
Type "help" for help.
dbname=#
However, when I specify host value, I cannot login with following error.
$ psql -h localhost -U postgres notel -W
Password for user postgres:
psql: FATAL: password authentication failed for user "postgres"
FATAL: password authentication failed for user "postgres"
I'm trying to connect from Sequelize.js, an ORM for node.js, but I experienced almost the same error message:
Possibly unhandled Error: error: password authentication failed for user "postgres"
Does anyone know how I can solve this problem?
Edit
My pg_hba.conf is as follows:
local all postgres peer
local all all peer
host all all 127.0.0.1/32 md5
host all all ::1/128 md5
I refered document about pg_hba.conf, but I don't know what's wrong...
Most likely this has to do with the client authentication file: pg_hba.conf.
It holds entries for each host/socket/user/password/database combination.
When you change your host to localhost, you have a different access route than when you connect directly over a Unix socket. You will patch yourself through TCP/IP instead of going "directly". If you open your pg_hba.conf file, you will find a bunch of rules at the end. These rules define which combinations are allowed to access the database.
In your case, look for lines that start with host, which means access through TCP/IP (and thus localhost) as opposed to local which means a Unix socket.
Probably there is a line tucked in there which prevents host connection access, or not via the credentials you think are correct (peer/md5 pitfall, read below).
As you show in your pg_hba.conf file you have local entries with peer authentication and host entries with md5 authentication. If you don't know the difference between the two authentication mechanisms, then that is your culprit at the moment and can cause some serious head-banging (not the Metal kind; the Against-a-wall kind).
Common pitfall
To avoid possible confusion, the difference between peer and md5 is ground for a common pitfall. They both use a user called postgres (when using -U postgres, that is), but the former is actual a Unix user created during installment of your PostgreSQL system, the latter is a database user created inside your PostgreSQL bookkeeping tables.
Always remember, if your setting is peer, use the credentials of the Unix user, if it is md5 use the credentials of the database user.
If no password has been set for the database user postgres, make sure you set one first. Empty passwords are not allowed either.
Extra notes
Always try to make your rules specific, avoid too many all entries for databases and users as this could put your installation wide open.
The first line that fits your access combination will be picked and any subsequent lines will be ignored. Make sure that there is no higher line that overwrites your rule.
Remember to restart your PostgreSQL daemon after changing this file, otherwise the changes won't be picked up.
If you want to do a secure "localhost" login with $ psql -U username dbname -h localhost -W
You need to make sure the user has been setup with an encrypted password and also setup your "pg_hba.conf" correctly to be "samehost".
1.) Create a Secure Login: "$ psql dbname"
ALTER USER username with encrypted password 'your_password';
2.) Modify "pg_hba.conf" as your main "postgres" user
# IPv4 local connections:
host all all samehost md5
3.) Restart your PostgreSQL server
service postgresql restart
If you have any other problems read your PostgreSQL log carefully at "/var/lib/pgsql/data/pg_log/*.log"
sudo nano /etc/postgresql/12/main/postgresql.conf
and set listening address: localhost
sudo nano /etc/postgresql/12/main/pg_hba.conf
IPv4 local connections:
host all all localhost md5

I forgot the password I entered during PostgreSQL installation

I either forgot or mistyped (during the installation) the password to the default user of PostgreSQL. I can't seem to be able to run it, and I get the following error:
psql: FATAL: password authentication failed for user "hisham"
hisham-agil: hisham$ psql
Is there a way to reset the password or how do I create a new user with superuser privileges?
I am new to PostgreSQL and just installed it for the first time. I am trying to use it with Ruby on Rails and I am running Mac OS X v10.7 (Lion).
Find the file pg_hba.conf. It may be located, for example, in /etc/postgresql-9.1/pg_hba.conf.
cd /etc/postgresql-9.1/
Back it up
cp pg_hba.conf pg_hba.conf-backup
Place the following line (as either the first uncommented line, or as the only one):
For all occurrence of below (local and host) , except replication
section if you don't have any it has to be changed as follow ,no MD5
or Peer authentication should be present.
local all all trust
Restart your PostgreSQL server (e.g., on Linux:)
sudo /etc/init.d/postgresql restart
If the service (daemon) doesn't start reporting in log file:
local connections are not supported by this build
you should change
local all all trust
to
host all all 127.0.0.1/32 trust
You can now connect as any user. Connect as the superuser postgres (note, the superuser name may be different in your installation. In some systems it is called pgsql, for example.)
psql -U postgres
or
psql -h 127.0.0.1 -U postgres
(note that with the first command you will not always be connected with local host)
Reset the password ('replace my_user_name with postgres since you are resetting the postgres user)
ALTER USER my_user_name with password 'my_secure_password';
Restore the old pg_hba.conf file as it is very dangerous to keep around
cp pg_hba.conf-backup pg_hba.conf
Restart the server, in order to run with the safe pg_hba.conf file
sudo /etc/init.d/postgresql restart
Further reading about that pg_hba file: 19.1. The pg_hba.conf File (official documentation)
When connecting to PostgreSQL from the command line, don't forget to add -h localhost as a command line parameter. If not, PostgreSQL will try to connect using PEER authentication mode.
The below shows a reset of the password, a failed login with PEER authentication and a successful login using a TCP connection.
# sudo -u postgres psql
could not change directory to "/root"
psql (9.1.11)
Type "help" for help.
postgres=# \password
Enter new password:
Enter it again:
postgres=# \q
Failing:
# psql -U postgres -W
Password for user postgres:
psql: FATAL: Peer authentication failed for user "postgres"
Working with -h localhost:
# psql -U postgres -W -h localhost
Password for user postgres:
psql (9.1.11)
SSL connection (cipher: DHE-RSA-AES256-SHA, bits: 256)
Type "help" for help.
postgres=#
The pg_hba.conf (C:\Program Files\PostgreSQL\9.3\data) file has changed since these answers were given. What worked for me, in Windows, was to open the file and change the METHOD from md5 to trust:
# TYPE DATABASE USER ADDRESS METHOD
# IPv4 local connections:
host all all 127.0.0.1/32 trust
# IPv6 local connections:
host all all ::1/128 trust
Then, using pgAdmin III, I logged in without using a password and changed user postgres's password by going to menu File → Change Password.
I was just having this problem on Windows 10 and the issue in my case was that I was just running psql and it was defaulting to trying to log in with my Windows username ("Nathan"), but there was no PostgreSQL user with that name, and it wasn't telling me that.
So the solution was to run psql -U postgres rather than just psql, and then the password I entered at installation worked.
Edit the file /etc/postgresql/<version>/main/pg_hba.conf and find the following line:
local all postgres md5
Edit the line and change md5 at the end to trust and save the file
Reload the postgresql service
sudo service postgresql reload
This will load the configuration files. Now you can modify the postgres user by logging into the psql shell
psql -U postgres
Update the postgres user's password
alter user postgres with password 'secure-passwd-here';
Edit the file /etc/postgresql/<version>/main/pg_hba.conf and change trust back to md5 and save the file
Reload the postgresql service
sudo service postgresql reload
Verify that the password change is working
psql -U postgres -W
For Windows (what has helped me):
This is the document I am referring to: How can I reset a PostgreSQL password?
Open your cmd and go to C:\Program Files\PostgreSQL\12\data.
This is usually the right path. You might have it stored somewhere else. Note that, if you have a different PostgreSQL version, there will be a different number. That doesn't matter.
Find a pg_hba.conf file and copy it to somewhere else (that way you will have an unmodified version of this file, so you will be able to look at it after we make some changes)
Open the pg_hba.conf file (not the backup, but the original)
Find the multiple lines that start with host near the bottom of the file:
host all all 127.0.0.1/32 md5
host all all ::1/128 md5
host replication all 127.0.0.1/32 md5
host replication all ::1/128 md5
Replace md5 with trust:
host all all 127.0.0.1/32 trust
host all all ::1/128 trust
host replication all 127.0.0.1/32 trust
host replication all ::1/128 trust
Close this file
Go to your search bar on windows and open Services app. Find postgres and restart it.
Picture of services app
Write cd.. in cmd and then cd bin. Your path should be C:\Program Files\PostgreSQL\12\bin
Enter: psql -U postgres -h localhost
Enter: ALTER USER postgres with password '<your new password>';Make sure that you include ; at the end
“ALTER ROLE” should be displayed as an indication that the previous line was executed successfully
Open original pg_hba.conf file and change back from trust to md5
Restart the server with Services app as before
Just a note: On Linux, you can simply run sudo su - postgres to become the postgres user and from there change what is required using psql.
For a Windows user for the latest PostgreSQL version (greater than 10):
Go to your PostgreSQL installation location, and search for pg_hba.conf, you will find it in ..\postgres\data\pg_hba.conf.
Open that file with Notepad, and find this line:
# TYPE DATABASE USER ADDRESS METHOD
# IPv4 local connections:
host all all 127.0.0.1/32 md5
# IPv6 local connections:
host all all ::1/128 md5
#..
Change the method from *md5* to *trust*:
# TYPE DATABASE USER ADDRESS METHOD
# IPv4 local connections:
host all all 127.0.0.1/32 trust
# IPv6 local connections:
host all all ::1/128 trust
# ...
Now go to your SQL shell (PSQL) and leave everything blank,
Server [localhost]:
Database [postgres]:
Port [8000]:
Username [postgres]:
It will not ask for a password this time, and you will be logged in,
Now run this line:
`ALTER USER yourusername WITH SUPERUSER`
Now you can leave the shell with \q.
Again, go to the file pg_hba.conf and change METHOD from trust to md5 again, and save it.
Now log in with your new user and password, and you can check \du for its attributes.
For a Windows installation, a Windows user is created. And "psql" uses this user for connection to the port. If you change the PostgreSQL user's password, it won't change the Windows one.
The command line just below works only if you have access to the command line.
Instead, you could use the Windows GUI application "c:\Windows\system32\lusrmgr.exe". This application manages users created by Windows. So you can now modify the password.
I did this to resolve the same problem:
Open the pg_hba.conf file with the gedit editor from the terminal:
sudo gedit /etc/postgresql/9.5/main/pg_hba.conf
It will ask for a password. Enter your admin login password.
This will open gedit with the file. Paste the following line:
host all all 127.0.0.1/32 trust
just below -
# Database administrative login by Unix domain socket
Save and close it.
Close the terminal, open it again and run this command:
psql -U postgres
You will now enter the psql console.
Now change the password by entering this:
ALTER USER [your preferred user name] with password '[desired password]';
If it says the user does not exist then instead of ALTER, use CREATE.
Lastly, remove that certain line you pasted in pg_hba and save it.
If you are running PostgreSQL on macOS, try these:
1. Edit the pg_hba.conf file
sudo vi /Library/PostgreSQL/9.2/data/pg_hba.conf
and Change the "md5" method for all users to "trust" near the bottom of the file
2. Find the name of the postgres service
ls /Library/LaunchDaemons
Look for postgresql
3. Restart the postgresql service
sudo launchctl stop com.edb.launchd.postgresql-9.2
sudo launchctl start com.edb.launchd.postgresql-9.2 (com.edb.launchd.postgresql-9.2 should be name postgresql service from step 3)
4. Start a psql session as postgres
psql -U postgres
(shouldn't ask for password because of 'trust' setting)
5. Reset password in the psql session by typing:
ALTER USER postgres with password 'secure-new-password';
6. Edit the pg_hba.conf file
Switch it back to 'md5'
8. Restart services again
If you are on Windows you can just run
net user postgres postgres
And log in in PostgreSQL with postgres/postgres as the user/password.
Follow step 1 on the best answer.
Here is my addition if you use the Windows operating system. Follow only step 1, and then open pgAdmin or postgres on web and click on file on the top nav. Click on reset layout, and finally reload the application. Whatever password you put should work. I used 1234.
I didn't manage to find the file pg_hba.conf in the folder C:\Program Files\PostgreSQL\14\data, because there is not a folder data at all.
I solved the problem by creating a new user using pgAdmin and gave it super system administrator rights.
Add the below line to your pg_hba.conf file. Which will be present in the installation directory of PostgreSQL
hostnossl all all 0.0.0.0/0 trust
It will start working.

psql: FATAL: Ident authentication failed for user "postgres"

I have installed PostgreSQL and pgAdminIII on my Ubuntu Karmic box.
I am able to use pgAdminIII successfully (i.e. connect/log on), however when I try to login to the server using the same username/pwd on the command line (using psql), I get the error:
psql: FATAL: Ident authentication failed for user "postgres"
Does anyone now how to resolve this issue?
The following steps work for a fresh install of postgres 9.1 on Ubuntu 12.04. (Worked for postgres 9.3.9 on Ubuntu 14.04 too.)
By default, postgres creates a user named 'postgres'. We log in as her, and give her a password.
$ sudo -u postgres psql
\password
Enter password: ...
...
Logout of psql by typing \q or ctrl+d. Then we connect as 'postgres'. The -h localhost part is important: it tells the psql client that we wish to connect using a TCP connection (which is configured to use password authentication), and not by a PEER connection (which does not care about the password).
$ psql -U postgres -h localhost
Did you set the proper settings in pg_hba.conf?
See https://ubuntu.com/server/docs/databases-postgresql how to do it.
Edit the file /etc/postgresql/8.4/main/pg_hba.conf and replace ident or peer by either md5 or trust, depending on whether you want it to ask for a password on your own computer or not.
Then reload the configuration file with:
/etc/init.d/postgresql reload
You're getting this error because you're failing client authentication. Based on the error message, you probably have the default postgres configuration, which sets client authentication method to "IDENT" for all PostgreSQL connections.
You should definitely read section 19.1 Client Authentication in the PostgreSQL manual to better understand the authentication settings available (for each record in pg_hba.conf), but here is the relevant snippet to help with the problem you're having (from the version 9.5 manual):
trust
Allow the connection unconditionally. This method allows anyone that
can connect to the PostgreSQL database server to login as any
PostgreSQL user they wish, without the need for a password or any
other authentication. See Section 19.3.1 for details.
reject
Reject the connection unconditionally. This is useful for "filtering
out" certain hosts from a group, for example a reject line could block
a specific host from connecting, while a later line allows the
remaining hosts in a specific network to connect.
md5
Require the client to supply a double-MD5-hashed password for
authentication. See Section 19.3.2 for details.
password
Require the client to supply an unencrypted password for
authentication. Since the password is sent in clear text over the
network, this should not be used on untrusted networks. See Section
19.3.2 for details.
gss
Use GSSAPI to authenticate the user. This is only available for TCP/IP
connections. See Section 19.3.3 for details.
sspi
Use SSPI to authenticate the user. This is only available on Windows.
See Section 19.3.4 for details.
ident
Obtain the operating system user name of the client by contacting the
ident server on the client and check if it matches the requested
database user name. Ident authentication can only be used on TCP/IP
connections. When specified for local connections, peer authentication
will be used instead. See Section 19.3.5 for details.
peer
Obtain the client's operating system user name from the operating
system and check if it matches the requested database user name. This
is only available for local connections. See Section 19.3.6 for
details.
ldap
Authenticate using an LDAP server. See Section 19.3.7 for details.
radius
Authenticate using a RADIUS server. See Section 19.3.8 for details.
cert
Authenticate using SSL client certificates. See Section 19.3.9 for
details.
pam
Authenticate using the Pluggable Authentication Modules (PAM) service
provided by the operating system. See Section 19.3.10 for details.
So ... to solve the problem you're experiencing, you could do one of the following:
Change the authentication method(s) defined in your pg_hba.conf
file to trust, md5, or password (depending on your security
and simplicity needs) for the local connection records you have
defined in there.
Update pg_ident.conf to map your operating system users to
PostgreSQL users and grant them the corresponding access privileges,
depending on your needs.
Leave the IDENT settings alone and create users in your database for
each operating system user that you want to grant access to. If a
user is already authenticated by the OS and logged in, PostgreSQL
won't require further authentication and will grant access to that
user based on whatever privileges (roles) are assigned to it in the
database. This is the default configuration.
Note: The location of pg_hba.conf and pg_ident.conf is OS dependent.
Simply adding the -h localhost bit was all mine required to work
In case none of the above works for you:
I've done quite a few Postgres installations, but was flummoxed today on a RedHat 6.5 system (installing Postgres 9.3). My typical hba.conf configuration that Aron shows above didn't work. It turned out that my system was using IPV6, and ignoring the IPV4 configuration. Adding the line:
host all all ::1/128 password
allowed me to login successfully.
For fedora26 and postgres9.6
First, log as user root then enter to psql by the following commands
$ su postgres
then
$ psql
in psql find location of hba_file ==> means pg_hba.conf
postgres=# show hba_file ;
hba_file
--------------------------------------
/etc/postgresql/9.6/main/pg_hba.conf
(1 row)
in file pg_hba.conf change user access to this
host all all 127.0.0.1/32 md5
In my case, solution here: (for people who concerned)
login to postgres:
sudo -i -u postgres
psql
ALTER USER postgres WITH PASSWORD 'postgres'; # type your password here
regards
You can set the environment variable PGHOST=localhost:
$ psql -U db_user db_name
psql: FATAL: Peer authentication failed for user "db_user"
$ export PGHOST=localhost
$ psql -U db_user db_name
Password for user mfonline:
Hmmm ...
If you can connect with the username and password in pgAdminIII but you can't connect with psql then those two programs are probably connecting to the database differently.
[If you're connecting to different databases, first try connecting to the same database. See below.]
From PostgreSQL: Documentation: 9.3: psql:
If you omit the host name, psql will connect via a Unix-domain socket to a server on the local host, or via TCP/IP to localhost on machines that don't have Unix-domain sockets.
If you're not running something like psql ... -h host_name ..., and you're running Ubuntu, psql should be connecting via a Unix-domain socket, so PostgreSQL probably isn't configured to allow one of the password authentication methods for the postgres user.
You can test this by running:
sudo -u postgres psql
If the above works, your server is probably configured to use peer authentication for local connections by the postgres user, i.e. asking the OS for your user name to confirm that you're postgres.
So It's Probably Your pg_hba.conf File
The full path of the file will be something like /etc/postgresql/9.3/main/pg_hba.conf. You can view it by, e.g. sudo cat /etc/postgresql/9.3/main/pg_hba.conf | more.
If you're omitting the host name in your psql command, you should be able to connect if you add the following entry to your pg_hba.conf file:
# Connection type Database User IP addresses Method
local all postgres md5
[Commented lines in the pg_hba.conf file start with #.]
If you are including the host name in your psql command, add this entry instead:
# Connection type Database User IP addresses Method
host all postgres 127.0.0.1/32 md5
You need to put the entry before any other entries are matched for your connection via psql. If in doubt about where to put it, just put it before the first un-commented line.
More about pg_hba.conf
From PostgreSQL: Documentation: 9.3: The pg_hba.conf File [bold emphasis mine]:
The first record with a matching connection type, client address, requested database, and user name is used to perform authentication. There is no "fall-through" or "backup": if one record is chosen and the authentication fails, subsequent records are not considered. If no record matches, access is denied.
Note that records are not matched on authentication method. So, if your pg_hba.conf file contains the following entry:
# Connection type Database User IP addresses Method
local all postgres peer
Then you won't be able to connect via:
psql -u postgres
Unless one of these entries is in your pg_hba.conf file above the former entry:
# Connection type Database User IP addresses Method
local all postgres md5
local all postgres password # Unencrypted!
local all all md5
local all all password # Unencrypted!
Out of all the answers above nothing worked for me. I had to manually change the users password in the database and it suddenly worked.
psql -U postgres -d postgres -c "alter user produser with password 'produser';"
I used the following settings:
pg_hba.conf
local all all peer
# IPv4 local connections:
host all all 127.0.0.1/32 password
# IPv6 local connections:
host all all ::1/128 password
Connection is successful finally for the following command:
psql -U produser -d dbname -h localhost -W
I found that I had to install an identity server, that listens on port 113.
sudo apt-get install pidentd
sudo service postgresql restart
And then ident worked.
The problem is still your pg_hba.conf file. This line: You can found this file in /etc/postgres/varion/main
local all postgres peer
Should be
local all postgres md5
These are brief descriptions of both options according to the official PostgreSQL docs on authentication methods.
Peer authentication
The peer authentication method works by obtaining the client's operating system user name from the kernel and using it as the allowed database user name (with optional user name mapping). This method is only supported on local connections.
Password authentication
The password-based authentication methods are md5 and password. These methods operate similarly except for the way that the password is sent across the connection, namely MD5-hashed and clear-text respectively.
If you are at all concerned about password "sniffing" attacks then md5 is preferred. Plain password should always be avoided if possible. However, md5 cannot be used with the db_user_namespace feature. If the connection is protected by SSL encryption then password can be used safely (though SSL certificate authentication might be a better choice if one is depending on using SSL).
After altering this file, don't forget to restart your PostgreSQL server. If you're on Linux, that would be sudo service postgresql restart.
my solution on PostgreSQL 9.3 on Mac OSX in bash shell was to use sudo to go into the data folder, and then append the necessary lines to the pg_hba.conf file to allow for all users to be trusted and be able to log in. This is what I did:
# in bash_profile edit PGDATA environmental variable
open ~/.bash_profile
# append this line to bash_profile
export PGDATA="/Library/PostgreSQL/9.3/data"
# reload bash_profile
source ~/.bash_profile
# open pg_hba.conf in vim
sudo vi /Library/PostgreSQL/9.3/data/pg_hba.conf
# append these two lines to the end of the pg_hba.conf file
local all all trust
host all all 127.0.0.1/32 trust
# can now login as user in bash
psql -d <db_name> -U <user_name> -W
I've spent more time solving this error that I care to admit.
The order of authentication configuration in pg_hba.conf is relevant in your case I think. The default configuration file includes several lines in a vanilla install. These defaults can match the conditions of your authentication attempts resulting in a failure to authenticate. It fails regardless of additional configuration added at the end of the .conf file.
To check which line of configuration is use make sure to look at the default log file for messages. You might see something like this
LOG: could not connect to Ident server at address "127.0.0.1", port 113: Connection refused
FATAL: Ident authentication failed for user "acme"
DETAIL: Connection matched pg_hba.conf line 82: "host all all 127.0.0.1/32 ident"
It turns out this default line is causing the rejection.
host all all 127.0.0.1/32 ident
try commenting it out.
If you've done all this and it still doesn't work, check the expiry for that user:
Postgres password authentication fails
I had similar problem and I fixed it in pg_hba.conf when removing all ident methods even for IP6 address (in spite I have only IP4 on machine).
host all all 127.0.0.1/32 password
host all all ::1/128 password
#for pgAdmin running at local network
host all all 192.168.0.0/24 md5
One hack around this is to edit pg_hba.conf
sudo vi /etc/postgresql/9.3/main/pg_hba.conf
To temporarily
# Database administrative login by Unix domain socket
local all postgres trust
At this point you are done. For security, then go and
sudo -u postgres psql template1
ALTER USER postgres with encrypted password 'your_password';
then go back and set pg_hba.conf back to
# Database administrative login by Unix domain socket
local all postgres md5
If you are using it on CentOS,you may need to reload postgres after making the above solutions:
systemctl restart postgresql-9.3.service
It related to configuration issue of PostgreSQL installation:
Configure # TYPE DATABASE USER ADDRESS METHOD section in below mentioned conf file
Find and Edit /var/lib/pgsql/10/data/pg_hba.conf or based on your file location to update method(md5). Update entry in the file if not existing for your config by comparing as below:
# TYPE DATABASE USER ADDRESS METHOD
# "local" is for Unix domain socket connections only
local all all trust
local all all md5
# IPv4 local connections:
host all all 127.0.0.1/32 md5
host all all 0.0.0.0/0 md5
# IPv6 local connections:
host all all ::1/128 md5
Configure CONNECTIONS AND AUTHENTICATION section in below mentioned conf file
Find and Edit /var/lib/pgsql/10/data/postgresql.conf or based on your file location
Update Listen Address and Port
listen_addresses = '*' // # what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost'; use '*' for all
port = 5432 // Set port as 5432
Restart your PostgreSQL:
sudo systemctl restart postgresql-10 # Update service name based on your installation
For Windows if you dont want to edit pb_gba.conf ie leave the method to MD5(default), create a new user, by running this query in Query tool in PGadmin
CREATE USER admin WITH PASSWORD 'secret'
then in cmd
psql "dbname=Main_db host=127.0.0.1 user=admin password=secret port=5432
where dbname is your db in postgresql
I had the same issuse after following this: PostgreSQL setup for Rails development in Ubuntu 12.04
I tried the other answers but all I had to do was in: "config/database.yml"
development:
adapter: postgresql
encoding: unicode
database: (appname)_development
pool: 5
username: (username you granted appname database priviledges to)
password:
I had to reinstall pdAdmin to resolve this issue
brew cask reinstall pgadmin4
I provisioned the username and password via terraform in GCP SQL and the problem was the password was not set properly via terraform so though not a proper fix but just to figure out the exact cause.
I changed the password for the user from GCP console and that worked.
This worked for me :
http://tecadmin.net/fatal-ident-authentication-failed-for-user-postgres/#
local all postgres trust
local all myapp_usr trust
# IPv4 local connections:
host all all 127.0.0.1/32 trust
# IPv6 local connections:
#host all all ::1/128 trust