Hello so i was using yesterday minikube and it was working fine but today i was trying to start with minikube start command and it give the following errors :
and after running minikube status it give the following result :
Thanks in advance for any help.
You are getting the following error:
Exiting due to GUEST_START: Failed kubeconfig update: could not read config: Error decoding config from data control character are not allowed
and
getting k8s client: client config: error loading config file "C:\Users<Your User>/.kube/config control characters are not allowed
Those errors indicates that your $KUBECONFIG has an invalid character in it.
Troubleshooting
For the future use, please provide more detailed information. It's well described in Minikube Troubleshooting. The following commands might provide useful information for troubleshooting:
$ minikube logs
$ minikube start --alsologtostderr -v=2
$ kubectl config view
In minikube output there is also updating the running virtualbox "minikube" VM It might be related with network changes.
Possible Solution
Remove config file from C:\Users\<Your User>/.kube/ and start minikube again.
Update your Minikube to newest version (current is 1.16).
Recreate your minikube cluster using minikube delete and create new one.
Execite minikube update context.
Related
I try to run minikube v0.22.1 and kubectl v1.7.5 on MacOS with Virtualbox.
$ minikube start
Starting local Kubernetes v1.7.5 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Starting cluster components...
Kubectl is now configured to use the cluster.
$ minikube version
minikube version: v0.22.1
$ minikube status
minikube: Running
cluster: Running
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
However all kubectl commands fail with "connection refused - did you specify the right host or port?"
$ kubectl version
Client Version: version.Info{Major:"1", Minor:"7", GitVersion:"v1.7.5", GitCommit:"17d7182a7ccbb167074be7a87f0a68bd00d58d97", GitTreeState:"clean", BuildDate:"2017-08-31T19:32:26Z", GoVersion:"go1.9", Compiler:"gc", Platform:"darwin/amd64"}
The connection to the server 192.168.99.100:8443 was refused - did you specify the right host or port?
The solution proposed here (sudo ifconfig vboxnet0 up) did not help, the vboxnet0 interface is up.
Any ideas or suggestions are highly appreciated.
If you run
kubectl config get-contexts
Do you get the following?
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
* minikube minikube minikube
If not that means your kubectl context is not correctly setup. To setup the context correctly run this
kubectl config use-context minikube
You may have it stopped or saved for any reason. sometimes, after you enable/disable addons you may need to restart it.
1) Restart minikube VM, stop it
$ minikube stop
2) Start it again, make sure you assign enough cpu/memory (the following is just an example of how to pass it, you need to adjust it based on available resources in your machine)
$ minikube start --memory=10000 --cpu 4
If this didn't work out, you can do the following that will help you to know more about the underlying cause of problem:
Check minikube status and make sure the status is Running
$ minikube status
Or, check minkube logs:
minikube logs
Finally, if you couldn't fix it, you may need to delete and start it from scratch
$ minikube delete && minikube start
Ref: https://github.com/kubernetes/minikube/issues/1498
I will just drop this in here in case anyone find this question.
As of right now I don't know the versions of the OP's setup. So I'm going to assume he has the latest version that was available when he posted, which was: 0.22.1
Description
I had a similar issue. The cluster was timing-out irregularly. One moment I got answers using kubectl cluster-info dump another I didn't. Then it worked again, and then it didn't. I found a github bug report with a solution.
Solution
Remove your VirtualBox VM.
Remove the ./minikube folder.
Remove the minikube executable.
Install version 0.19.0.
Verify that minikube is working with: kubectl
Versions
OS: Windows 10 (Home edition)
Minikube bugged version: 0.22.2
Minikube working version: 0.19.0
Kubectl (client): v1.7.0
Kubectl (server): v1.6.0
EDIT:
I kept having some issue with minikube after I posted this original answer. I found something that fixed the issue completely.
It's related to the dynamic memory setting in Hyper-V.
Solution
1. Turn off the hyper-v minikube VM.
2. Go to the VM's settings.
3. Turn off dynamic memory allocation.
4. Assign a decent amount of memory.
5. Save and turn the VM on again.
This should work with any minikube version. See this github issue for progress on an automatated solution
When debugging the minikube commands, e.g.
$ minikube dashboard --loglevel 0 --logtostderr
some proxy issues became visible and could be solved.
I ran into this situation this morning (another Monday!) on MacOS 11.3 with minikube v1.19.0.
I ran minikube status and got the following:
E0503 14:15:43.912005 7308 status.go:412] kubeconfig endpoint: got: 127.0.0.1:64041, want: 127.0.0.1:56537
minikube
type: Control Plane
host: Running
kubelet: Stopped
apiserver: Stopped
kubeconfig: Misconfigured
WARNING: Your kubectl is pointing to stale minikube-vm.
To fix the kubectl context, run `minikube update-context`
Seemed like good advice, so I did run minikube update-context and got this:
🎉 "minikube" context has been updated to point to 127.0.0.1:56537
💗 Current context is "minikube"
After which everything worked like it did on Friday.
After the Linux Security OS patching and reboot we are unable to start kubernetes service received below error.
Error message: The connection to the server 192.168.1.101:8443 received while starting the kubernetes service.
This issue happened due to systemd package got updated during the security patching.
So We did below action to bring up the application On each master nodes
1. Update the /usr/lib/systemd/system/kubelet.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
2. Update the /usr/lib/systemd/system/kube-proxy.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
3. Run the kube-restart.sh on the master nodes.
4. run the kube-restart.sh on the worker nodes.
Update: I am using minikube version: v1.25.2
The command mentioned in this thread did NOT work:
minikube start --memory=10000 --cpu 4 #this will FAIL
This, however, DID WORK (use cpus instead. I also changed values to show minimum requirement for Docker):
minikube start --memory=1800 --cpus=2 # this will work
minikube start --memory=1800 --cpus 2 # this will also work
minikube delete && minikube start
sudo minikube start --vm-driver=none (start minikube again)
This solved my problem
minikube delete
minikube start
just restarted the container
I tried to start minikube with --extra-config=apiserver.Features.Enable-SwaggerUI=true flag, but for any reason it throws this error:
❌ Problems detected in kube-apiserver [7152cdb4684e]:
Error: unknown flag: --Features.Enable-SwaggerUI
Then when i run the minikube again without any flags, it still gives the previous error.
Now that i don't want this feature any more, how can i run minikube without any flags being appended automatically?
Minikube v1.25.2
Well as mentioned in here, the --extra-config is repeatedly being attached to minikube start command.
This config is stored in [home]/.minikube/profiles/minikube/config.json -> ExtraConfig key. All i did was to remove the Features.Enable-SwaggerUI from this key-value.
This command works to me
minikube start --extra-config=apiserver.enable-swagger-ui=true
I am trying to runminikube start--vm - driver = virtualbox orminikube start--vm - driver = hyperv by enabling the hyper - visor, but i am getting below error.
Can Someone please take me out of this:
For future, please try to post text instead of pic in your question. Second thing is that you are using quite old versions.
Usually errors like:
status error: host: state: machine does not exist minikube windows
The "minikube" host does not exist
are shown where you have some "leftovers" from previous minikube cluster.
It's hard to determine root cause exactly as it would need exact steps you have performed.
1. Delete previous minikube and start again
You have to use command like:
minikube delete
if you specified name of cluster using
minikube delete -p <your-cluster-name>
After that you should start minikube again.
minikube start --vm-driver=<depends-on-your-needs>
Here you have all drivers you can use with minikube.
2. Use --force flag.
It would look like:
minikube start --vm-driver=hyperv --force
but it's also recommended to user minikube delete before this command.
3. Steps to run Minikube on Windows.
As you mentioned you already have docker, but if you would need to reinstall, you can find good tutorial on Docker official docs.
Good tutorial, how run Minikube on Windows 10 can be found here.
You can also check this StackOverflow thread for more updated version.
4. Further issues with starting minikube
If you will still have issues with running minikube, please update your question with debug logs. It can be found here.
minikube start --vm-driver=hyberv --v=7
or
minikube logs
I am trying to install Kubernetes on windows server 2016.
I tried to install minikube, and got some errors.
This is the tutorial that I followed:
https://www.assistanz.com/installing-minikube-on-windows-2016-server/
This is the command + error that I got:
PS C:\Windows\system32> minikube start –vm-driver=hyperv –hyperv-virtual-switch=Minikube
Starting local Kubernetes v1.10.0 cluster...
Starting VM... Downloading Minikube ISO
170.78 MB / 170.78 MB [============================================] 100.00% 0s
E1106 19:29:10.616564 11852 start.go:168] Error starting host: Error creating host: Error executing step: Running precreate checks.
: VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path.
Retrying.
E1106 19:29:10.689675 11852 start.go:174] Error starting host: Error creating host: Error executing step: Running precreate checks.
: VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path
================================================================================
An error has occurred. Would you like to opt in to sending anonymized crash
information to minikube to help prevent future errors?
To opt out of these messages, run the command:
minikube config set WantReportErrorPrompt false
================================================================================
Please enter your response [Y/n]:
Someone knows how to solve it?
I googled it, but no luck.
Thanks!
I was never able to get the config parameters to work with minikube start.
I was able to get past this error using the minikube config commands in PowerShell (should also work at a command prompt):
minikube config set vm-driver hyperv
minikube config set hyperv-virtual-switch ExternalSwitch
minikube config view
minikube delete
minikube start
For more information on the command run: minikube config -h
Looking at the documentation you have provided, I have noticed that the screenshot shows a slight difference to the one they've quote.
I have also found this command in another piece of documentation from kubernetes here, showing the same command as that from the screenshot.
I suggest you try the following command;
minikube start --vm-driver=hyperv --hyperv-virtual-switch=Minikube
It is true that OP has pasted the incorrect command, because there is - instead of --. I tried to pass this arguments to minikube and all you get is an instant error. So the issue must be somewhere else. I remember having similar issue and it got resolved after deleting the .kube and .minikube folders and trying to run it again.
After taking a closer look this tutorial is destined for installation of minikube inside of a Windows Server 2016 Virtual Machine, so you have to have a Nested Virtualization able hardware:
Prerequisites The Hyper-V host and guest must both be Windows Server
2016/Windows 10 Anniversary Update or later. VM configuration version
8.0 or greater. An Intel processor with VT-x and EPT technology -- nesting is currently Intel-only. There are some differences with
virtual networking for second-level virtual machines. See "Nested
Virtual Machine Networking".
So the main question is, is that true in your scenario? Are you trying to perform your steps on Windows Server Hyper-V virtual machine with nested virtualization feature?
If you confirm that I have technical possibilities to check it in that scenario.
Otherwise I recommend using the "traditional way" of running minikube in Windows, according for example to this tutorial.
I try to run minikube v0.22.1 and kubectl v1.7.5 on MacOS with Virtualbox.
$ minikube start
Starting local Kubernetes v1.7.5 cluster...
Starting VM...
Getting VM IP address...
Moving files into cluster...
Setting up certs...
Connecting to cluster...
Setting up kubeconfig...
Starting cluster components...
Kubectl is now configured to use the cluster.
$ minikube version
minikube version: v0.22.1
$ minikube status
minikube: Running
cluster: Running
kubectl: Correctly Configured: pointing to minikube-vm at 192.168.99.100
However all kubectl commands fail with "connection refused - did you specify the right host or port?"
$ kubectl version
Client Version: version.Info{Major:"1", Minor:"7", GitVersion:"v1.7.5", GitCommit:"17d7182a7ccbb167074be7a87f0a68bd00d58d97", GitTreeState:"clean", BuildDate:"2017-08-31T19:32:26Z", GoVersion:"go1.9", Compiler:"gc", Platform:"darwin/amd64"}
The connection to the server 192.168.99.100:8443 was refused - did you specify the right host or port?
The solution proposed here (sudo ifconfig vboxnet0 up) did not help, the vboxnet0 interface is up.
Any ideas or suggestions are highly appreciated.
If you run
kubectl config get-contexts
Do you get the following?
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
* minikube minikube minikube
If not that means your kubectl context is not correctly setup. To setup the context correctly run this
kubectl config use-context minikube
You may have it stopped or saved for any reason. sometimes, after you enable/disable addons you may need to restart it.
1) Restart minikube VM, stop it
$ minikube stop
2) Start it again, make sure you assign enough cpu/memory (the following is just an example of how to pass it, you need to adjust it based on available resources in your machine)
$ minikube start --memory=10000 --cpu 4
If this didn't work out, you can do the following that will help you to know more about the underlying cause of problem:
Check minikube status and make sure the status is Running
$ minikube status
Or, check minkube logs:
minikube logs
Finally, if you couldn't fix it, you may need to delete and start it from scratch
$ minikube delete && minikube start
Ref: https://github.com/kubernetes/minikube/issues/1498
I will just drop this in here in case anyone find this question.
As of right now I don't know the versions of the OP's setup. So I'm going to assume he has the latest version that was available when he posted, which was: 0.22.1
Description
I had a similar issue. The cluster was timing-out irregularly. One moment I got answers using kubectl cluster-info dump another I didn't. Then it worked again, and then it didn't. I found a github bug report with a solution.
Solution
Remove your VirtualBox VM.
Remove the ./minikube folder.
Remove the minikube executable.
Install version 0.19.0.
Verify that minikube is working with: kubectl
Versions
OS: Windows 10 (Home edition)
Minikube bugged version: 0.22.2
Minikube working version: 0.19.0
Kubectl (client): v1.7.0
Kubectl (server): v1.6.0
EDIT:
I kept having some issue with minikube after I posted this original answer. I found something that fixed the issue completely.
It's related to the dynamic memory setting in Hyper-V.
Solution
1. Turn off the hyper-v minikube VM.
2. Go to the VM's settings.
3. Turn off dynamic memory allocation.
4. Assign a decent amount of memory.
5. Save and turn the VM on again.
This should work with any minikube version. See this github issue for progress on an automatated solution
When debugging the minikube commands, e.g.
$ minikube dashboard --loglevel 0 --logtostderr
some proxy issues became visible and could be solved.
I ran into this situation this morning (another Monday!) on MacOS 11.3 with minikube v1.19.0.
I ran minikube status and got the following:
E0503 14:15:43.912005 7308 status.go:412] kubeconfig endpoint: got: 127.0.0.1:64041, want: 127.0.0.1:56537
minikube
type: Control Plane
host: Running
kubelet: Stopped
apiserver: Stopped
kubeconfig: Misconfigured
WARNING: Your kubectl is pointing to stale minikube-vm.
To fix the kubectl context, run `minikube update-context`
Seemed like good advice, so I did run minikube update-context and got this:
🎉 "minikube" context has been updated to point to 127.0.0.1:56537
💗 Current context is "minikube"
After which everything worked like it did on Friday.
After the Linux Security OS patching and reboot we are unable to start kubernetes service received below error.
Error message: The connection to the server 192.168.1.101:8443 received while starting the kubernetes service.
This issue happened due to systemd package got updated during the security patching.
So We did below action to bring up the application On each master nodes
1. Update the /usr/lib/systemd/system/kubelet.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
2. Update the /usr/lib/systemd/system/kube-proxy.service fie by removing the below two lines:
ExecStartPost=/bin/bash -c 'umask 0022; pgrep -x kubelet > /run/kubelet.pid'
ExecStopPost=/bin/bash -c 'rm -f /run/kubelet.pid'
3. Run the kube-restart.sh on the master nodes.
4. run the kube-restart.sh on the worker nodes.
Update: I am using minikube version: v1.25.2
The command mentioned in this thread did NOT work:
minikube start --memory=10000 --cpu 4 #this will FAIL
This, however, DID WORK (use cpus instead. I also changed values to show minimum requirement for Docker):
minikube start --memory=1800 --cpus=2 # this will work
minikube start --memory=1800 --cpus 2 # this will also work
minikube delete && minikube start
sudo minikube start --vm-driver=none (start minikube again)
This solved my problem
minikube delete
minikube start
just restarted the container