I want the field NUMPAGES in MS Word to show the total page number of my document, minus exactly 1 page. I am trying to change the code with Ctrl+F9, but I can't seem to get the syntax right.
Use a field coded as:
{={NUMPAGES}-1}
Note: The field brace pairs (i.e. '{ }') for the above example are all created in the document itself, via Ctrl-F9 (Cmd-F9 on a Mac or, if you’re using a laptop, you might need to use Ctrl-Fn-F9); you can't simply type them or copy & paste them from this message.
{={ NUMPAGES \* MERGEFORMAT }-1}
Related
I have a text file.
There are hundreds of different filenames in the text file.
However, it says different date and time at the end of each file.
Sample: life-in-cosmos-2021-11-11-12-45-46 or life-in-cosmos-2021-11-11-12-45.
In order to change the names of the files in bulk, I first need to delete the dates in this text file.
So I want to automatically delete the dates and times in each row.
However, I don't know anything about this.
And I don't know how to use macros.
Therefore, if there is a solution for this, can you provide an answer with a picture or video?
In order to explain my request more clearly, I present 2 examples.
Example:
Original Text: cosmos-lights-colors-T5DAPC-2020-09-11
The result I want to do: cosmos-lights-colors-T5DAPC
Example 2:
Original Text: cosmos-lights-colors-T5DAPC-2021-04-02-12-37-49-utc
The result I want to do: cosmos-lights-colors-T5DAPC
Assuming a date is always at end of each line, you can replace a regular expression with an empty string. To do this:
Press Ctrl+H to bring up the Replace dialog box, and set following options:
Find: -[0-9]{4}-[0-9]{2}-[0-9]{2}[0-9\-]*?(\-utc){0,1}$
Replace with: (blank)
Set the Regular Expressions option
First, click the Find Next button to highlight matches to make sure they are correct. If the matches are incorrect, you will need to adjust the regular expression.
Finally, click the Replace All button to remove all matched strings.
Before replace
cosmos-lights-colors-T5DAPC-2020-09-11
cosmos-lights-colors-T5DAPC-2021-04-02-12-37-49-utc
After replace
cosmos-lights-colors-T5DAPC
cosmos-lights-colors-T5DAPC
Please excuse the stupid question, but I am an absolute freshman in Crystal Reports.
I would like to add a plaintext to Crystal Reports. The problem is, if a hyperlink has been inserted that contains a display text, it will be displayed as follows:
HYPERLINK "http://google.de/https://www.google.com/webhp?hl=de&sa=X&ved=0ahUKEwipsMvN_-vkAhWCEVAKHf3JBCIQPAgD " google.com
I just want the hyperlink to be displayed within "
The result should be https://www.google.com/webhp?hl=de&sa=X&ved=0ahUKEwipsMvN_-vkAhWCEVAKHf3JBCIQPAgD
However, it is also possible that "hyperlinks" that do not contain a hyperlink may occur.
My professor has created an Access database that contains texts and hyperlinks and I have to display the hyperlinks correctly.
Some lines of the database:
HYPERLINK "http://votetandem.org/" votetandem.org
HYPERLINK "https://app.votetandem.org/"votetandem.org
Sometimes there is a space between "URL" display text and sometimes not
Use the REPLACE() function. Hit F1 for online help.
I found a solution for my problem. I created a formular field. chr(34) is " in ASCII
If InStr({TABLE},"HYPERLINK " & chr(34)) > 0 Then
Split({TABLE},chr(34))[2]
else
{TABLE}
the URL is the second entry. The first is Hyperlink, second real URL and the third the displayed name.
So I am having a problem. This is what I can create on one of my laptop:
On another, when I created something that has {TC} in it, the whole field code disappeared.
For the example above, if on the other computer, both are running Office 2010,
I can input the code to create the table of content from:
{TOC \f \h \z \f 1\t "Heading 1,1,Heading 2,2,Heading 3,3,Title,1}
to
{TC}
The moment I type in TC, the whole {} disappears.
Other field codes work just fine, except for {TC}. So my question is how do I get {TC} to show on my other laptop?
Thank you for your time.
Apparently, I found my answer.
When I searched google for my answer, most sites give this as a solution:
For Word 2010, go to File->Options->Advanced
Under Show document contents: Select "Show field code instead of their values"
This is the equivalent of pressing Alt+F9, which DID NOT solve my problem.
Apparently, the solution to get {TC} to show in your document is in:
go to File->Options->Display
and check to always show HIDDEN TEXT.
I hope this helps someone in the future.
Yeah, the disappearing TC code is annoying at first -- seems like it's broken. Other codes work, but why does that disappear, even if entering manually? Word instantly sets TC code to Hidden, even the field code itself.
To temporarily toggle this visible without permanently changing your display to show Hidden Text, you can use the normal Ctrl-Shift-8, which toggles display of spaces, paragraph marks, tabs, and Hidden Text, on and off. This is a good keyboard shortcut to have in your standard back of tricks anyway. It is frequent in Word that you need to toggle paragraph marks on and off, because paragraph formatting is attached to the Paragraph mark, and when they're hidden, it can be tricky to fix various formatting issues.
The original post was a few years ago, but I fear things have gotten worse since then, not better. I am using Word 365 v2201, which should be up to date. The other day, I wasted hours on trying to resolve this issue with TC field codes.
First I tried entering them using Insert > Quick Parts > Field. Word creates what looks like a field code, but it behaves as normal text. Messing around with the various controls to toggle field display and hidden text etc etc, has absolutely no effect. It is basically a faux field. And of course, it is completely ignored when compiling the TOC.
Next, I tried entering it manually, by using Ctrl + F9 to either create a blank field or convert some existing text into a field. Same result as above.
As with the original post, this seems to afflict only the TC field code. Other codes work fine, including TOC. And if I create a TOC field, then edit the code to TC, it immediately loses its properties as a field. If I then put the O back in, it immediately behaves as a field once again. Unlike in the original post, adjusting the settings for field display and/or hidden text, have no impact.
In the end, the only solution was to create the field using Alt + Shift + o to open the Mark Table of Contents Entry dialog box. And finally, this works!
I'm trying to add a hyperlink to a mail merge field. So something like this:
{HYPERLINK "{MERGEFIELD "Links" }"}
So I create a field like this.
{ MERGEFIELD Links }
And the above works (it displays different links for different recipients).
However, when I go to Edit Field, and then attempt to add HYPERLINK to { MERGEFIELD Links}, Word will not allow me. Meaning that when I type HYPERLINK followed by a space, the "variable" field is gone. Instead of word displaying...
LINK
it displays...
{HYPERLINK "{MERGEFIELD "Links" }"}
even after I press "update field". So Word is not letting me enter HYPERLINK for some reason.
How do I solve this?
From the Microsoft Web Site,
On the Insert menu, click Field (under Quick Parts in later office versions).
In the Field names list, click Hyperlink,
and then click OK. The text Error! Hyperlink reference not valid
appears in the document.
Press ALT+F9 to open the { HYPERLINK \* MERGEFORMAT } field code.
Put the insertion point after HYPERLINK and then add a space.
On the Insert menu, click Field. In the Field names list, click MergeField. In the Field name text box, type the name of the data source field that contains the hyperlink, and then click OK. For example, if the name of the data source field is "Address1," the field code appears as follows: { HYPERLINK { MERGEFIELD "Address1" } \* MERGEFORMAT }
Press ALT+F9 to close the field code. You now have Error! Hyperlink reference not valid text.
Put the insertion point at some arbitrary place in the middle of the Error! Hyperlink reference not valid text, and insert the text you want to appear. If you would like a merge field, insert that from the "Insert Merge Field" option on the menu.
Delete the remaining text of Error! ... before and after the text you want to keep.
Note: If your merge field only contains an identifier, with the URL to be provided as a static part of the merge document, this can work also. On Step 5, you will need to insert the URL text as well as the MergeField, for example:
{ HYPERLINK "https://www.myurl.com/EditForm.aspx?ID={ MERGEFIELD ID }" \* MERGEFORMAT }
I also have been struggling with this. What I found to be the key is creating the document from SCRATCH and not saving it before executing the mail merge. Here are the steps I used:
open a new document and click on the step by step mail merge wizard; add your generic text.
To add the variable hyperlink go to insert>quick parts>fields
select hyperlink on the left and click okay
Use alt + F9 to see the hyperlink field code
Type “” and between them insert your merged field so that {HYPERLINK \* MERGEFORMAT} -> becomes {HYPERLINK"{MERGEFIELD"Constructed_URL"}"\*MERGEFORMAT}
Press ALT+F9 to hide the field code
Click in the text "Error! Hyperlink reference not valid" and replace with something generic like click here.
Complete the mail merge BEFORE you save the document.
Hope this helps and good luck!
Start with the process here:
http://support.microsoft.com/kb/912679
However, like user1867326 indicated, the hyperlink (which should be variable with the mail merge) is converted into a static link when the Word file is reopened.
A solution that seems to work is adding a bookmark within the hyperlink field code immediatly after the mergefield.
{ HYPERLINK { MERGEFIELD "Link" } \* MERGEFORMAT }
Click between the } and \ and go to INSERT > Bookmark, give it a name, and this seems to prevent Word from replacing the mergefield with a static hyperlink.
This answer is adapted and hopefully clarified from the clever solution described here:
Mailmerge dynamic hyperlink fields lost after save/reload of document - Word 2010
This is what worked for me for an email mail merge with variable hyperlinks that all display the same text. I am using Office 2016 Word.
Put the insertion point where you would like the link display text to be in the document.
On the Insert menu, click Quick Parts, and select Field.
In the Field Names list, click Hyperlink, and then click OK. The text Error! Hyperlink reference not valid appears in the document.
Press ALT+F9 to open the { HYPERLINK * MERGEFORMAT } field code. 5. Put the insertion point after HYPERLINK.
On the Insert menu, click Quick Parts, and select Field. In the Field Names list, click MergeField.
In the Field name text box, type the name of the data source field that contains the hyperlink, and then click OK. For example, if the name of the data source field is "Address1," the field code appears as follows: { HYPERLINK { MERGEFIELD Address1 } * MERGEFORMAT }
Press ALT+F9 to close the field code. You now have Error! Hyperlink reference not valid text.
Put the insertion point just before the period in ‘Error! Hyperlink reference not valid text.’ and delete all the text except for the period. Write in the link display text. Make sure not to delete the period (this is important).
To check that the hyperlinks are mapping, right click on the link display text and click edit hyperlink. You will see the correct link in the address field for each record.
I like to style the period text color to white so it looks invisible.
I have had limited success with the other suggestions - basically, Word is buggy in this area. There is a simple alternative - indeed the only alternative AKAIK if you want the hyperlink to vary AND the text that is displayed to vary too (not an unreasonable requirement).
Note that this only works for DOCUMENT MERGES, not for EMAIL MERGES, since it relies on processesing the output document.
The trick is to add a place marker (text that serves as an ID) wherever you want a hyperlink. Insert this via a regular mergefield. In your table of source data, you need columns
place marker, text_for_display, hyperlink
You then need to put your source data into Excel (if that isn't where you have it already) and put this formula
="Set Rng = ActiveDocument.Content: Rng.Find.Execute FindText:="""&[place marker]&""": ActiveDocument.Hyperlinks.Add Anchor:=Rng, Address:="""&[hyperlink]&""", TextToDisplay:="""&[text_for_display]&""""
into a blank column in the first row, and fill down.
You need to amend [place marker],[hyperlink] and [text_for_display] to the appropriate cell references.
If the [hyperlink] includes a query string, you may find you want to build it using a formula, based on other data in the source.
The resulting formulae can then be pasted into a macro and run on the output document.
You may then want to use the "Robbins/Mayor" macro http://www.wordbanter.com/showthread.php?t=18346 to split the generated documents.
I got this working thanks to this thread, but then it stopped working and I figured out why so I thought I'd say thanks by posting what I discovered here.
The issue is that word has a special type of curly brace. Copying the code text from this thread may not work for that reason. To get the curly braces Word wants, I used Fn + Command + F9 on my Mac running Catalina and Office 365. Apparently some Mac users may find Command + F9 works -- just test to find out. I'm sure Windows has a similar keystroke set. I found the Mac solution in this post.
Also, the syntax that works for me is: { HYPERLINK { MERGEFIELD "url" } * MERGEFORMAT } where "url" is the label of the column with the link in my Excel file. Note the position of the quotes. This differs from other posts here (I tried the other combinations) but I wouldn't be surprised if the syntax may vary across Word versions and operating systems.
To get this method to work in Mac Office 365 (Big Sur), you need to know about the Toggle Field Codes in the context menu. The shortcut above to replicate the Alt-F9 behavior will create a new field, instead of allowing you to edit the field that exists.
At these steps:
Press ALT+F9 to open the { HYPERLINK * MERGEFORMAT } field code.
OR
Press ALT+F9 to close the field code. You now have Error! Hyperlink reference not valid text.
Instead of the keyboard shortcut, right click on the error message and select Toggle Field Codes from the context menu.
Answer worked great for me with this adjustment! Thank you!
I have a Word document with fields of the reference variety, which occur in the form "[field].[field]"--in other words, there's a period between the two fields. I want to globally replace this with a space.
Word offers the ^d special character to search for fields, but for some reason the query "^d.^d" does not find anything. However, ".^d" does. Now comes the problem, however--what do I specify as the replacement text in order to retain the field code? If using regular expressions, I could use a "Find What Expression" such as \1, but with regexp ("wild card") mode the ^d is not permitted.
I guess I could write a macro...
I would like to add to Bibadia's solution.
An example of an index entry field; we want to change a name we misspelled.
Make sure hidden formatting is displayed (toggle with SHIFT+CTRL+F8).
Make sure wildcards option is not selected. To search for fields, use the opening and closing field braces code (optionally use ^w for spaces, as Bibadia suggested):^19 XE "Deo, John" ^21
Replace won't recognize field braces character, but will allow to insert the clipboard's content. ;). To do that, insert in text the correct entry. CTRL+F9 to insert field and type:XE "Doe, John"
Select the field above and copy
Use ^c in the replace box
Hit Replace All
Ta-da!
It's usually better to go the macro route when finding fields because, as you say, the find algorithm that Word uses doesn't work the way you might hope with fields.
But if you know exactly what the fields contain, you can specify a search pattern that will probably work (however not in wildcard mode).
For example, if you want to look for figure number field pairs such as
{ STYLEREF 1 \s }.{ SEQ Figure \* ARABIC \s 1 }
(which would typically be the same set of fields everywhere in the document)
If you only really need to look for the following:
{ STYLEREF 1 \s }.<any field>
you could ensure that field codes are displayed and search for
^d STYLEREF 1 \s ^21.^d
or
^19 STYLEREF 1 \s ^21.^19
If you need to be more precise, you can spell out the second field as well.
"^d" only works for finding the field beginning, not the field end.
It's a shame that ^w wants to find at least 1 whitespace character because otherwise it would be more robust to look for
^19^wSTYLEREF^w1^w\s^w^21.^19
Perhaps someone else knows how to work around that without using wildcards?
Torzaburo,
I suggest that you do this using a macro. You can start by recording the macro, and later refining your processing steps within the macro.
First turn on the hidden characters by navigating to Home > Paragraph > toggle the show/hide Paragraph symbol. Also, select all and toggle the field codes on (right-click and select "Toggle Field Codes".
Open a new blank Word doc in addition to the one you have open. You will use this later. Start the macro recording and find the field using the "^d" (field code) as you said.
When the field is found, copy only the field text within the brackets, and not the full field reference. While the macro is still recording, ALT + TAB to the new blank document and paste the field code in as plain text.
At this point, do the necessary find & replace processing to the field codes. Highlight the processed field codes, copy, ALT + TAB back to the original document, and paste back between the { } brackets.
Stop the macro recording. Add any further custom processing to the macro VBA.
Select-All and re-toggle the field codes. Update the field codes.
You don't need a macro. Just toggle all field codes on by using Alt+F9. Then do a find and replace for what you want to change. Once the replacement is complete, use Alt+F9 again to toggle the field codes back off.
Disclaimer: I didn't originate this solution, but it's clean and elegant and I thought it should be included here:
(Adapted from Search & Replace Field Codes in Word):
Create or find a single instance of the field you want to convert text to
Toggle Field Codes visible (AltF9)
Copy the code for the field you want to use to the Clipboard (highlight and CtrlC)
Open the Replace dialog box (CtrlH), insert the text you want to replace in the Find What box and then enter ^c in the Replace With box.
This will replace your text with the contents of the Clipboard, turning it into the field code you copied in step 3. It also copies formatting information (font, color, etc.), to control how the field will appear when hidden. (Caveat: I've tested this with Word 2003 under Windows 7 only.)
Coming in late on this, probably way too late for Beth (sorry Beth). And this may not be quite what Beth was looking for. But for anyone interested ...
It sounds like Beth may have created captions throughout the document using INSERT CAPTION (hence the presence of field codes). This means these captions will have been (automatically) created in CAPTION style.
To globally replace the separator "." with " " (space) in such captions, take two steps:
[1] Go to REFERENCES | INSERT CAPTION, then click on NUMBERING and replace the SEPARATOR "." with "EM-DASH". This will replace all separators in captions for the selected label in the CAPTION Window. If you have other labels in use in the document (e.g. FIGURE), select the other labels one by one and repeat this process.
[2] Do a find/replace searching for special character "em-dash" (^+) in style CAPTION, replacing with " ". Click REPLACE ALL.
Voila!
NOTE: This presumes that em-dash does not appear in the caption text anywhere. If it does, then you'll need to do a pre- and post- "fiddle" to ensure these em-dashes are not touched by the global replace above.
The "pre-fiddle" is to do a global find/replace across captions, replacing the em-dash ("^+") with some other string (e.g. "EM-DASH") that doesn't ever occur in any caption's text. Then you do the separator change as described above. Finally, the "post-fiddle" is to restore the em-dashes that were in the captions, by doing a global replace of the string "EM-DASH" with the actual em-dash character "^+".