In VsCode, whenever I try to use IntelliSense at the end of:
an object to see its methods,
an structure to see its components or
a path to see its directories,
IntelliSense only suggests me one result at a time, so I have to hit ↑ and ↓ to navigate through the results until I eventually find what I was looking for.
This is quite not ideal... Is there a way to configure VsCode so that it pops a tap with all options, instead of one at a time?
Thanks!
It might be you just need to resize it with the new resize ability.
https://code.visualstudio.com/updates/v1_51#_resizable-suggestions
Related
I would like to change the following VS code behavior but can't find a way to do so:
When the cursor is on some items a box pops up with info about that item. I find this extremely annoying as it often blocks what I'm trying to edit. How to disable the pop up?
I code CSS on a single line, such as:
h1 {something; something; something; } And the next CSS on the next line. No Spaces!
But when I save it VS code automatically reformulates it, putting each something on a new line. This is extremely, extremely annoying! It horribly wastes space, and forces me to scroll down a lot to find something I want to edit. How do I get VS code to stop messing with My Coding Style?
To disable the pop up. Do these necessary changes Disable pop up
To stop the CSS formatting, just see in the extensions if you have downloaded CSS formatter, if so then uninstall it or disable it.
I have a VSCode extension that helps me autocomplete file paths, however many file paths grow long and are truncated in the VSCode intellisense popover window.
How can I set VSCode to either:
have a fixed width that I can set to be large
automatically expand to fit the intellisense options (preferable)
I happen to have written the extension so if needed I can update it if that is required.
One way around this is to press Ctrl + Space (or what ever your "Trigger suggestion" shortcut is) while the suggestion popover is open to show more detail about current selection.
So this (where I can't differentiate between the Trans imported from #lingui/macro and the one from #lingui/react):
Becomes this:
I don't think this is possible, VSCode generally gives extensions very little control over the built-in UI. See also the Restrictions section of the Extensions Capabilities Overview. Technically there is a way to hack around that, but I wouldn't necessarily recommend it.
There are also a number of settings for the suggest widget, but none of them seems to correspond directly to width. The closest you can get would be reducing the font size with "editor.suggestFontSize".
Does VS Code (I currently use v1.8.1) has any shortcut like ctrl+q in eclipse?
It returns your cursor to the place where you stopped writing code(very useful for fast code browsing)
and it is different to alt+left which navigate backward
EDIT: I have found that this extension should do that you're asking. I suggest trying it out.
Original:
Out of the box in VS Code, this command does not exist. The list of default shortcuts can be found here, or you can open the keybindings settings in VS Code (ctrl+k, ctrl+s on Windows) and see which commands are available.
If you'd like to suggest this as a feature, you can open a new issue on GitHub or consider creating an extension.
If I understand correctly, you want a command that will move the cursor to where the last edit in a document was made.
This should be possible using an extension that listens to document change events and records the position of the cursor. Then, when the command is issued, it sets the editors cursor to that saved position.
You can also try "Eclipse Keymap" from Alphabot Security, has a lot of eclipse bindings.
I don't believe there is a built-in way to do this, but you could work around it by using an extension such as https://marketplace.visualstudio.com/items?itemName=alefragnani.Bookmarks .
as most of us surely do every now and then, I try to improve my workflow. As Eclipse is my main IDE, I wondered if it may be possible to use it without mouse. I browsed the available shortcuts and tried to use them instead of my mouse. I found interesting features like Ctrl+3 which opens something like the Apple spotlight.
I know there are a lot of questions concerning favorite shortcuts etc. but I'd like to know if it works because at the moment it feels a bit squishy 100% without mouse.
So is anyone out there using Eclipse like that? And are there some hints to ease the change?
Yes, it is possible. For a start, check out 10 Eclipse navigation shortcuts every java programmer should know. When you use these 10 shortcuts and some of the shortcuts of the comments, you will already see a big performance boost.
The "open type" and "open resource" dialogs are CamelCase-sensitive, so when typing "NPE" in the open type dialog, I get two matching items NoPermissionException and NullPointerException. So using good names with consistent spelling is a must.
Ctrl+F11 starts a program, F11 debugs it. Note howewer to check if in Window-Preferences-Run/Debug-Launching the value of "Launch Operation" is set to your needs.
You may want to customize the search dialog (Ctrl+h) to only show the file search (default is to context sensitively present you with different search tabs).
Ctrl+n allows you to create something new (opens a wizard with an initial filter text to filter the possible next pages).
I'm a blind programmer who uses eclipse. While there are plenty of shortcuts I find people often overlook using menus from the keyboard. If there's a function you use a lot that doesn't appear to be supported with keyboard shortcuts you can either create a shortcut to it in prefferences or use keyboard shortcuts such as alt+f to access the file menu and a one letter combination that allows you to access the item. For example hit alt+f then a to access the save as dialog. The underlined letter is the one you want to hit once in the menu.
There are a couple of things you can do to improve your keyboard:mouse usage ratio with Eclipse.
First off, if you push Ctrl-Shift-L, it shows you a master list of all the shortcuts you can use. If you know what you want to do, this is usually a quicker way of doing it without having to dig through menus, and as a bonus, you will learn some shortcuts you didn't know before.
The other thing you can try is a plugin called MouseFeed which looks promising. It tells you the shortcut for any menu item you use and if there isn't one, reminds you to create one. It essentially acts as training wheels until you become as close to 100% keyboard use as possible. I'm not sure how well it works in 3.4, but you can give it a shot.
Hope that helps.
Here you get an Eclipse Shortcut Overview PDF file of all key bindings. This file you can print and put beside your keyboard if you wish.
Is anyone aware of any method (or external plugin) that would allow for nested editor tabs? It would be nice to be able to group related open files into their own "master" tabs, but I'm not sure if this is even possible. Any ideas?
This is totally non-obvious, and I discovered it by accident, but...
If you click on a tab and start dragging it downwards, once you get more than half-way down the editor pane, a horizontal line will appear. Let go, and now you'll have two different editor panes, each with tabs of documents. Now you can drag tabs up and down between the two panes to see different documents at the same time.
I think that's as close as you can get.
I think the best you can currently do is "Window->New Window" and then use each new window as a separate "tab" of related editors. Not exactly ideal, I admit.
It's a cool idea though, especially if you could have shortcuts or something that open groups of editors with a single command.
This definitely isn't possible in the current RCP. You might be able to construct an editor component which created a CTabFolder and delegated to other editor components, but I'm not sure how well that would work.
There are Perspectives in Eclipse that you might use to achieve something close, they are more global things though...
But I agree with you, I would like this feature as well! This would be also very useful when editing many files that have the same name but come from different packages, because now it's a mess >_<
For me the utility of such a feature is to reduce context switching time. I'm working on project A, have lots of editors open, now I need to drop that and work on project B. I want to keep all the editors open associated with project A but hide them while I work on B. When I'm done with B, I can pick up right where I left off in A without having to find and open all those A files again; I can even leave them unsaved indefinitely, since Juno never crashes!! :)
I have used the New Window feature, and it's great, but the new window needs a bunch of configuration (closing Views I don't need, moving stuff around to where I want it, opening Views I had open in the old window, and so on) before I can get to work. It also uses a lot more memory than a simple tab group would since it seems to be a complete new copy of Eclipse.
The split-window feature is great and I use it all the time. It is indeed tab groups, and if there were a way to hide a tab group, and for each tab group to have its own tab list (the thing you get when you click ">>5" so you can see editors you have open that don't fit in the tab header), it would totally fill the bill.