I want to install jupyterlab in my Windows 10 laptop but when I run the command pip install jupyterlab I am getting the following error:
I tried to look for answers but didn't get any. Please help.
I also ran into the same problem and it turns out the reason behind this error is that Jupyterlab isn't compatible with Python versions 3.8 and above. You can try to uninstall your current version of python and reinstall python 3.7 and then install Jupyterlab again.
Related
I just downloaded vscode using homebrew and install python#3.11 using homebrew as well. I used pip3 install jupyter as I saw other recommend to fix this issue and still no luck. I have downloaded all the extensions on vscode and I have set the kernal to homebrew version of python and I still recieve this issue. Note that I have used notebooks in the past and have never gotten this issue so I am not really sure what it is this time. I have not installed anaconda.
I have tried uninstalling and installing the extensions but no luck. I have tried to pip3 uninstall jupyter, pip3 uninstall notebook and reinstall them and still no luck. I have tried to change the kernal to the default python3 on the mac and still nothing. My mac is m1 running on Ventura 13.2. I am able to run python code on regular python files just not using jupyter notebook. I followed the instructions how to set it up on vscode website but I got this error. Any help would be appreciated thank you.
I have same issue using VSCode on Mac OS.
VSCode's 'Jupyter' plugin is broken, causing VSCode unable to bind with python interpreter. Downgrading from v2023.1.2000312134 to v2022.11.1003412109 fixed my issue.
I had the same issue, running on m1 mac (Ventura 13.2). If you aren't already, make sure you are utilising a python virtual environment:
# Create a python virtual environment
$ python -m venv venv
# Activate your python virtual environment
$ source venv/bin/activate
Form your VSCode Command Palette (Shift+Command+P), search and then choose
Jupyter: Select Interpreter to Start Jupyter Server
You should then select the python version that is associated to your virtual environment (venv).
Fair Warning: I am extremely new to python, so please excuse any dumb mistakes I make =)
I would like to be able to open/close/manipulate/read Word documents (docx files) on my Mac using Python. The python-docx module looked really useful, so I have been trying to install it on my system, to no avail.
Here's what I've done so far:
Checked that I do indeed have python installed using the python --version command in terminal. I have version 3.7.0, so all good there.
Checked that I do indeed have pip installed - I was able to use pip install and pip uninstall commands, so all good. I also upgraded my pip version using pip install --upgrade pip to pip-19.1.1
Following the online documentation (see here), I tried pip install python-docx. This seemed to work just fine, and after the progress bar loaded all the way I saw:
Successfully built python-docx
twisted 18.7.0 requires PyHamcrest>=1.9.0, which is not installed.
Installing collected packages: python-docx
Successfully installed python-docx-0.8.10
I wasn't completely sure what pyhamcrest was, but I installed it anyway just to be safe using pip install pyhamcrest
As other sites suggested, I also tried to install Pillow, lxml, and python-dateutil using their respective install commands, and in each case saw the Requirement already satisfied: message, with an anaconda path listed.
Frustrated, I also tried easy_install python-docx, the manual version, and even pip install docx . In all cases, when I run IDLE and type from docx import Document or just import docx, I get the following message in the shell:
`Traceback (most recent call last):`
`File "/Users/[my_name]/Desktop/Medical.py", line 3, in <module> `
`import docx`
`ModuleNotFoundError: No module named 'docx'`
Could anyone help point me in the right direction? Thank you very much.
The Anaconda Python distribution has its own system of installation of packages.
After the installation of Anaconda, the variable $PATH has been modified so that anaconda python was the first, and OsX's python in the last position.
If you type "python" in a shell will execute the anaconda python, instead of the standard OsX python (which is 2.7, not 3.x).
Following the instructions of the package python-docx, you have installed it using pip, which is the default method for installing packages, but this method is not valid for Anaconda Python. So, you finished installing python-docx for the python 2.7 of OsX.
To install packages for anaconda, you must run the command
conda install <package>
The python-docx module for anaconda can be found in a separated repository called conda-forge; typing the command
conda install -c conda-forge python-docx
you will install the package and the requested dependencies.
Other useful commands are:
anaconda-navigator for exploring the Anaconda system
anaconda-project for managing projects with anaconda
idle3 for Anaconda Python shell.
Before start coding, run anaconda-navigator and take a look at the 'Learning' section.
For a better experience, I suggest PyCharm IDE for Anaconda from JetBrains.
I finally was able to install ipython on my Windows 7 PC and it runs without any errors. The problem is that I used to code in ipython but in MAC. Now that I am trying to upload my previous notebooks I receive the following error:
Unreadable Notebook: MyFile.ipynb Unsupported nbformat version 4
I found this answer for my question but unfortunately that is not for windows and did not resolve my problem. It is worth to mention:
ipython --version
produces:
2.3.1
Any help or comment on this is much appreciated.
Thanks
It took me a while to figure this out but I got the first lead from user "cel". I used to have multiple versions of python (2.7 and 3.4). I removed python 3.4 because it's not compatible with spark yet. Next, I had to remove WinPython3.4 and replace it with WinPython2.7 so it can integrate with python 2.7 installed on my PC. Finally, I installed python 2.7.9 and set the C:/Python27/Script as a part of system environment variable. After doing all this I ran the following commands:
pip uninstall ipython
This helped me to remove older version of ipython. Then:
pip install ipython
This installed the latest version of ipython on my windows pc. Finally:
pip install notebook --upgrade
To upgrade notebook to latest version. Right now, ipython os installed and and should work fine doing this:
ipython notebook
Had no problem importing my previous .ipynb after all of the above.
Good luck to you all.
I have the same problem on Linux. Simply doing:
sudo pip install notebook --upgrade
worked for me. I have python 3.4 and 2.7 and unlike the answer by nimafl, there was no need for me to remove one them or to first uninstall ipython. A simple upgrade did the trick. Now instead of version 2.3.1 I have version 4.0.3 of ipython.
I have read previous posts on installation issues. Nothing seems to work.
I have Ubuntu 14.04LTS, 32 bit, Anaconda python ver 2.7.
I installed pyephem using sudo pip install pyephem [after checking I have python-dev, and latest pip] Installation said it was successful.
When I run Python 2.7 and try to import ephem, it says Import error:
No Module named _libastro.
Any help will be appreciated.
If you are using Anaconda and have activated your conda environment, you should not need to use sudo — that might aim the install at your system Python, the one governed by the root account and by sudo, instead. You could try activating your conda environment and then just doing conda install ephem because it comes built in to conda, you do not need pip plus a compiler to try installing it!
I'm having trouble getting an ipython console in Spyder. It only offers a python interpreter under the "interpreters" menu.
I've seen this issue for a couple of others in Stackoverflow, but didn't have much joy with the proffered solutions.
I'm running linux Mint 16 and have installed both ipython (v 1.1.0) and Spyder (v 2.2.1) the easy way via the Mint Software Manager. I made sure that I also installed ipython-qtconsole and verified that I could run it from a terminal (i.e. ipython qtconsole).
I can activate an ipython console using the following commands in a Spyder python console:
import IPython
IPython.start_ipython()
though the font coloring is strange and doesn't work well on a white background (e.g. error messages in yellow and light green). It would be nice anyway to be able to start ipython the normal way from the Spyder menu.
You may want to install python-zmq for Python 2 and python3-zmq for Python 3.
I use Ubuntu 14.04, so:
sudo apt-get install python-zmq python3-zmq
I'm also using Linux Mint (18.1, at this time) and I have faced the same issue.
What solved this for me was installing Ipython3 Qt console (that, of course, should be Ipython Qt console if you're using Python 2.x).
In case you have it installed, check if you have the latest version
(In Linux Mint you can do this through Synaptic, aptitude or apt-get.)