I know tickerplant will write tplog when it receives data.
at the end of the day, ticker plant will start writing a new tplog.
I see tp.q but cannot figure out which function does that.
I know .u.tick start writing the tplog on disk but dont see which command make the tplog start writing new tplog next day?
Can someone please point me out?
.u.ts runs on a timer, constantly checking for end of day. At end of day it calls .u.endofday, which calls .u.ld.
.u.ld checks for existence of a log file with the current date in its name, if this file does not exist, it creates it.
.u.ld is responsible for creating the new log file each day
Related
For instance
File A Loaded then next day
File B Loaded then next day
This time Again, File A received this time sequence should be abort
Can anyone help me out with this
Thanks
There are multiple ways to solve this, but please don't do intentionally aborts as they're most likely boomerangs.
Keep track of filenames and file hashes (like MD5sum) in a table and compare the list before loading. If the file is known, handle/ignore it.
Just read the file again as if it was new or updated. Compare old data with new data using the Change Capture stage, handle data as needed, e.g. write changed and new data to target. (recommended)
I would not recommend writing a sequence that "should abort" as this is not the goal of an ETL process. If the file contains the very same content that is already known, just ignore it. If it has updated data, handle it as needed. Only abort, if there is a technical issue, e.g. the file given is wrong formatted. An abort of a job should indicate that something is wrong with the job. When you get a file twice, then it's not the job that failed.
If an error was found in the data that needs to be fixed by others, write the information about it to a table. Have a another independend process monitoring that table to tell the data producer about it (via dashboard, email,...).
I've currently got this Cron expression that I'm using to trigger a process in UiPath Orchestrator:
0 0 15 21W * ? *
Runs on the closest working day to the 21st of each month at 3pm.
However I need it to run on the next working day at 3pm if the 21st is a non working day.
Tried searching for an answer and nothing quite fit the brief.
I used this website to build my expression (which is a great tool) but it only had an option for 'nearest day' and not next working day given a specific day of month: https://www.freeformatter.com/cron-expression-generator-quartz.html
As you don't need the nearest day, you can't use the functionality of Orchestrator cronjob. I would recommend creating a wrapper process as follows:
Create a new process, let's call it StartJobByCheckingDate
Now create a trigger that starts StartJobByCheckingDate each day at 3pm
So that process is now your manager of your desired process
Now we need to check if it is the 21th day
Here you have different ways to solve it
You could create a DataTable or even a file in the StartJobByCheckingDate process, that contains all the different days where your desired process should be fired (but this is very manual, you might not want to update this every year, so this might not be the smartest but the easiest solution)
The other idea is to check if the current day is the 21th day. If so check if it is Saturday/Sunday (non-working day).
If true: you could now create a empty dummy file somewhere that tracks that the 21th was a non-working day, and the next day you check that file existing, if it exists you check the current day to be a working day, and if so you delete the file again and start your desired process
If false: just start your desired process directly
I think 2. idea would be that best. Sure you have 365 jobs runs/year. But when you keep that helper process smart this will just be seconds.
Another idea instead of using the dummy file, would be to use Entities. Smarter but need some more time to get familiar with.
We have (had) the exact same issue. Since UiPath doesn't offer a feasible solution out of the box, we will work around the restriction using the following strategy: We trigger the actual job daily, considering a custom-built, static NonWorkingDay-list that will just suppress the execution of the robot every day we don't want it to run.
These steps are needed:
Get a list with of all known bank holidays, saturdays and sundays until 2053 or so...
Build a the static exclusion-list using a script that does something like this (pseudocode. I will update the answer once we have actually implemented the solution):
1. get all valid execution dates
loop through every 28th of the month until end of 2053
if the date is in the bankHolidayList then
loop until the next bankDay is found
add it to the list of valid ExecutionDates
else
add the date to the validExecutionDate-list
2. build exclusion-list
loop through every day until end of 2053
if the date is not in the validExecutionDate-list
add it to the exclusionDate-list
Format the csv accordingly and upload it to the orchestrator tenant as a NonWorkingDay-List
Update your trigger to run daily at your desired time, using the uploaded NonWorkDay-Calendar
While the accepted answer will surely work as well, we prefered to go with this approach because having a separate robot that does nothing but executing a UiPath trigger just doesn't seem right to me. With this approach we have no additional code that we potentially need to maintain.
In my oppinion not having a solution for this concern out of the box is a lack of feature that UiPath will (hopefully) fix until end of 2053 ;-)
Cheers
You can configure your trigger to launch oftener, then manage dates at init of your process, but you must set up a list of "holydays" or check in some way.
Also you can use the calendar option of orchestrator (+info)
I'm attempting to create a channel designed to take a binary file from an sFTP site and transfer it to a second sFTP site. The source site updates their files on Friday, so I'm creating the channel to run every Sunday. The main issue is that I want to leave processed files in the source directory, and only process files that have been deposited between the weekly channel runs.
Is something like this doable in Mirth Connect, and what is the most efficient way to accomplish it?
In the Source Map is a variable named fileLastModified, which holds the "last modified date of the file, as an epoch time in milliseconds". You should be able to use this as a condition for Destination Set filtering.
In the Source Transformer, add a Destination Set Filter step. Remove all destinations on the condition of fileLastModified being older than a week, or older than the time elapsed since the last time the channel ran. You can track the last time the channel ran by storing that value in the globalChannelMap, if you need to.
I have a job in Autosys. I want new log file to be created for its every run. Hence, I want to append date and time to the logfile name I am giving in std_out_file. Is there any way to do this other than creating a global variable and then updating it everyday using another autosys job?
There is no default to do this. You can use this:
\\logpath\%auto_job_name%.%autorun%.OUT.txt
This will create a run number and it will not overwrite the logs even if there are multiple runs a day. You can use the date/time that is when the file is created for sorting.
We have a log that tracks faxes sent through our fax server. It is a .csv that contains Date_Time, Duration, CallerID, Direction (i.e. inbound/outbound), Dialed#, and Answered#. This file is overwritten every 10 minutes with any new info that was tracked on the fax server. This cannot be changed to be appended.
Sometimes our faxes fail, and the duration on those will be equal to 00:00:00. We really don't know if they are failing until users let us know that they are getting complaints about missing faxes. I am trying to create a Powershell script that can read the file and notify us via email if there are n amount of failures.
I started working on it, but it quickly became a big mess as I ran into more problems. One issue I was trying to overcome was having it email us over and over if there are certain failures. Since I can't save anything on the original .csv's, I was trying to preform these ideas in the script.
Copy .csv with a new header titled "LoggedFailure". Create file if it doesn't exist.
Compare the two files, and add different data (i.e. updates on the original) to the copy.
Check copied .csv for Durations equal to 00:00:00. If it is, mark the LoggedFailure header as "Yes" or some value.
If there are n amount of failures, email us.
Have this script run as a scheduled task (every hour or so).
I'm having difficulty with maintaining the data. I haven't done a lot of work with scripting or programming, so I'm having trouble with making the correct logic. I can look up cmdlets and understand them, but my main issue is logic. Does anyone have any tips or could provide some ideas on how to best update the data, track failures as to not send duplicate information, and have it run?
I'd use a hash table with the Dialed# as the key. Create PSCustomObjects that have LastFail date and FailCount properties as the values. Read through the log in chronological order, and add/increment a new entry in the hash table every time it finds an entry with Duration of 00:00:00 that's newer than what's already in the hash table. If it finds a successful delivery event, delete the entry with that Dialed# key from the hash table if it exists.
When it's done, the hash table keys will be a collection of the Dialed numbers that are failing, and the objects in the values will tell you how many failures there have been, and when the last one was. Use that to determine determine if an alert needs to be sent, and what numbers to report.
When a problem with a given fax number is resolved, a successful fax to that number will clear the entry from the hash table, and stop the alerts.
Save the hash table between runs by exporting it as CLIXML, and re-import it at the beginning of each run.