In CDF, rules engine is a transform available. However, when its used in a pipeline with below syntax, get an error
rulebook "Titanic Normalization" {
version 1
meta {
description "This rule book applies transformation on the titanic feed."
source "titanic-rules.xslx"
user "joltie"
}
rule "csv-to-fields" {
description "trial"
when(present(body)) then {
parse-as-csv body ',' false;
drop body;
set columns F1,F2,F3;
cleanse-column-names;
}
}
}
So Do we need to explicitly install DRE to make this work? do we need source excel mentioned in meta section?
Related
I am developing an extension for visual studio code using language server protocol, and I am including the support for "Go to symbol in workspace". My problem is that I don't know how to select the matches...
Actually I use this function I wrote:
function IsInside(word1, word2)
{
var ret = "";
var i1 = 0;
var lenMatch =0, maxLenMatch = 0, minLenMatch = word1.length;
for(var i2=0;i2<word2.length;i2++)
{
if(word1[i1]==word2[i2])
{
lenMatch++;
if(lenMatch>maxLenMatch) maxLenMatch = lenMatch;
ret+=word1[i1];
i1++;
if(i1==word1.length)
{
if(lenMatch<minLenMatch) minLenMatch = lenMatch;
// Trying to filter like VSCode does.
return maxLenMatch>=word1.length/2 && minLenMatch>=2? ret : undefined;
}
} else
{
ret+="Z";
if(lenMatch>0 && lenMatch<minLenMatch)
minLenMatch = lenMatch;
lenMatch=0;
}
}
return undefined;
}
That return the sortText if the word1 is inside the word2, undefined otherwise. My problem are cases like this:
My algorithm see that 'aller' is inside CallServer, but the interface does not mark it like expected.
There is a library or something that I must use for this? the code of VSCode is big and complex and I don't know where start looking for this information...
VSCode's API docs for provideWorkspaceSymbols() provide the following guidance (which I don't think your example violates):
The query-parameter should be interpreted in a relaxed way as the editor will apply its own highlighting and scoring on the results. A good rule of thumb is to match case-insensitive and to simply check that the characters of query appear in their order in a candidate symbol. Don't use prefix, substring, or similar strict matching.
These docs were added in response to this discussion, where somebody had very much the same issue as you.
Having a brief look at VSCode sources, internally it seems to use filters.matchFuzzy2() for the highlighting (see here and here). I don't think it's exposed in the API, so you would probably have to copy it if you wanted the behavior to match exactly.
I've read all the documentation I can find and watched all the videos I can find and don't understand how to do this. I have set up an xPages REST Service and it works well. Now I want to place the results of the service into either a combobox or typeahead text field. Ideally I would like to know how to do it for both types of fields.
I have an application which has a view containing a list of countries, another view containing a list of states, and another containing a list of cities. I would like the first field to only display the countries field from the list of data it returns in the XPages REST Service. Then, depending upon which country was selected, I would like the states for that country to be listed in another field for selection, etc.
I can see code for calling the REST Service results from a button, or from a dojo grid, but I cannot find how to call it to populate either of the types of fields identified above.
Where would I call the Service for the field? I had thought it would go in the Data area, but perhaps I've just not found the right syntax to use.
November 6, 2017:
I have been following your suggestion, but am still lost as can be. Here's what I currently have in my code:
x$( "#{id:ApplCountry}" ).select2({
placeholder: "select a country",
minimumInputLength: 2,
allowClear : true,
multiple: false,
ajax: {
dataType: 'text/plain',
url: "./Application.xsp/gridData",
quietMillis: 250,
data: function (params) {
return {
search:'[name=]*'+params.term+'*',
page: params.page
};
},
processResults: function (data, page) {
var data = $.map(data, function (obj) {
obj.id = obj.id || obj["#entityid"];
obj.text = obj.text || obj.name;
return obj;
});
},
return {results: data};
}
}
});
I'm using the dataType of 'text/plain' because that was what I understood I should use when gathering data from a domino application. I have tried changing this to json but it makes no difference.
I'm using processResults because I understand this is what should be used in version 4 of select2.
I don't understand the whole use of the hidden field, so I've stayed away from that.
No matter what I do, although my REST service works if I put it directly in the url, I cannot get any data to display in the field. All I want to display in the field is the country code of the document, which is in the field named "name" (not my choice, it's how it came before I imported the data from MySQL.
I have read documentation and watched videos, but still don't really understand how everything fits together. That was my problem with the REST service. If you use it in Dojo, you just put the name of the service in a field on the Dojo element and it's done, so I don't understand why all the additional coding for another type of domino element. Shouldn't it work the same way?
I should point out that at some points it does display the default message, so it does find the field. Just doesn't display the country selections.
I think the issue may be that you are not returning SelectItems to your select2, and that is what it is expecting. When I do something like you are trying, I actually use a bean to generate the selection choices. You may want to try that or I'm putting in the working part of my bean below.
The Utils.getItemValueAsString is a method I use to return either the string value of a field, or if it is not on the document/empty/null an empty string. I took out an if that doesn't relate to this, so there my be a mismatch, but I hope not.
You might be able to jump directly to populating the arrayList, but as I recall I needed to leverage the LinkedHashMap for something.
You should be able to do the same using SSJS, but since that renders to Java before executing, I find this more efficient.
For label/value pairs:
LinkedHashMap lhmap = new LinkedHashMap();
Document doc = null;
Document tmpDoc = null;
allObjects.addElement(doc);
if (dc.getCount() > 0) {
doc = dc.getFirstDocument();
while (doc != null) {
lhmap.put(Utils.getItemValueAsString(doc, LabelField, true), Utils.getItemValueAsString(doc, ValueField, true));
}
tmpDoc = dc.getNextDocument(doc);
doc.recycle();
doc = tmpDoc;
}
}
List<SelectItem> options = new ArrayList<SelectItem>();
Set set = lhmap.entrySet();
Iterator hsItr = set.iterator();
while (hsItr.hasNext()) {
Map.Entry me = (Map.Entry) hsItr.next();
// System.out.println("after: " + hStr);
SelectItem option = new SelectItem();
option.setLabel(me.getKey() + "");
option.setValue(me.getValue() + "");
options.add(option);
}
System.out.println("About to return from generating");
return options;
}
I ended up using straight up SSJS. Worked like a charm - very simple.
I'm working on a simple grammar correction web add-in for MS Word. Basically, I want to get the selected text, make minimal changes and update the document with the corrected text. Currently, if I use 'text' as the coercion type, I lose formatting. If there is a table or image in the selected text, they are also gone!
As I understand from the investigation I've been doing so far, openxml is the way to go. But I couldn't find any useful example on the web. How can I manipulate text by preserving the original formatting data? How can I ignore non-text paragraphs? I want to be able to do this with the Office JavaScript API:
I would do something like this:
// get data as OOXML
Office.context.document.getSelectedDataAsync(Office.CoercionType.Ooxml, function (result) {
if (result.status === "succeeded") {
var selectionAsOOXML = result.value;
var bodyContentAsOOXML = selectionAsOOXML.match(/<w:body.*?>(.*?)<\/w:body>/)[1];
// perform manipulations to the body
// it can be difficult to do to OOXML but with som regexps it should be possible
bodyContentAsOOXML = bodyContentAsOOXML.replace(/error/g, 'rorre'); // reverse the word 'error'
// insert the body back in to the OOXML
selectionAsOOXML = selectionAsOOXML.replace(/(<w:body.*?>)(.*?)<\/w:body>/, '$1' + bodyContentAsOOXML + '<\/w:body>');
// replace the selected text with the new OOXML
Office.context.document.setSelectedDataAsync(selectionAsOOXML, { coercionType: Office.CoercionType.Ooxml }, function (asyncResult) {
if (asyncResult.status === "failed") {
console.log("Action failed with error: " + asyncResult.error.message);
}
});
}
});
The CQ.tagging.TagInputField provided two configuration parameter which won't work in combination:
tagsBasePath
namespaces
Using the OOTB facebook tags as example, I want to restric the dialog to only display the Favorite Teams. The Structure is this:
So I set tagBasePath to /etc/tags/facebook and namespaces to [favorite_teams]. This does what it is supposed to do and only shows the two teams in the dialog. But when you click on it, a JavaScript exceptions is thrown. The problem lies in the following method defined in /libs/cq/tagging/widgets/source/CQ.tagging.js
CQ.tagging.parseTag = function(tag, isPath) {
var tagInfo = {
namespace: null,
local: tag,
getTagID: function() {
return this.namespace + ":" + this.local;
}
};
// parse tag pattern: namespace:local
var colonPos = tag.indexOf(isPath ? '/' : ':');
if (colonPos > 0) {
// the first colon ":" delimits a namespace
// don't forget to trim the strings (in case of title paths)
tagInfo.namespace = tag.substring(0, colonPos).trim();
tagInfo.local = tag.substring(colonPos + 1).trim();
}
return tagInfo;
};
It does not respect the configurations set on the widget and returns a tagInfo where the namespace is null. I then overlayed the method in my authoring JavaScripts, but this is of course not working in the SiteAdmin as my custom JS are not included.
So, do I really have to overwrite the CQ.tagging.js below libs or can I somehow inject my overlay into the SiteAdmin so the PageProperties Dialog opened from there works as well?
UPDATE: I had a chat with Adobe support regarding this and it was pointed out that if you use tagsBasePath you need to place it somewhere else than below /etc/tags. But this won't work as well as the TagListServlet will return no tags as /etc/tags is also fixed in the TagManager as the tagsBasePath. I now overwrite the above mentioned js at its location, being well aware that I need to check it if we install a hotfix or an update. Is someone has a more elegant solution I'd be still thankful.
I'm trying to use Yahoo Local Search in a Kynetx Application.
ruleset avogadro {
meta {
name "yahoo-local-ruleset"
description "use results from Yahoo local search"
author "randall bohn"
key yahoo_local "get-your-own-key"
}
dispatch { domain "example.com"}
global {
datasource local:XML <- "http://local.yahooapis.com/LocalSearchService/V3/localsearch";
}
rule add_list {
select when pageview ".*" setting ()
pre {
ds = datasource:local("?appid=#{keys:yahoo_local()}&query=pizza&zip=#{zip}&results=5");
rs = ds.pick("$..Result");
}
append("body","<ul id='my_list'></ul>");
always {
set ent:pizza rs;
}
}
rule add_results {
select when pageview ".*" setting ()
foreach ent:pizza setting pizza
pre {
title = pizza.pick("$..Title");
}
append("#my_list", "<li>#{title}</li>");
}
}
The list I wind up with is
. [object Object]
and 'title' has
{'$t' => 'Pizza Shop 1'}
I can't figure out how to get just the title. It looks like the 'text content' from the original XML file turns into {'$t' => 'text content'} and the '$t' give problems to pick().
When XML datasources and datasets get converted into JSON, the text value within an XML node gets assigned to $t. You can pick the text of the title by changing your pick statement in the pre block to
title = pizza.pick("$..Title.$t");
Try that and see if that solves your problem.
Side notes on things not related to your question to consider:
1) Thank you for sharing the entire ruleset, what problem you were seeing and what you expected. Made answering your question much easier.
2) The ruleset identifier should not be changed from what AppBuilder or the command-line gem generate for you. Your identifier that is currently
ruleset avogadro {
should look something more like
ruleset a60x304 {
3) You don't need the
setting ()
in the select statement unless you have a capture group in your regular expression
Turns out that pick("$..Title.$t") does work. It looks funny but it works. Less funny than a clown hat I guess.
name = pizza.pick("$..Title.$t");
city = pizza.pick("$..City.$t");
phone = pizza.pick("$..Phone.$t");
list_item = "<li>#{name}/#{city} #{phone}</li>"
Wish I had some pizza right now!