VSCode complains that resolving my environment takes too long - visual-studio-code

Question

When I launch VSCode from the dock, it always complains that
Resolving your shell environment is taking very long. Please
review your shell configuration.
and then a bit later
Unable to resolve your shell environment in a reasonable time.
Please review your shell configuration.
According to this page, Resolving Shell Environment is Slow, the first message is displayed if .bashrc takes more than three seconds and the second is displayed if it takes longer than ten seconds.
I opened a terminal in VSCode and sourced my .bashrc file
dpatterson#dpconsulting$ time source ~/.bashrc
real 0m1.448s
user 0m0.524s
sys 0m0.671s
dpatterson#dpconsulting$
As you can see, it takes less than 1.5 seconds.
Environment:
MacOS Mojave 10.14.6
VSCode 1.53.0
Hopefully someone knows what is causing this.
Barring that, maybe someone can point me to the code that actually generates these errors.
TIA

Answer 1

encountered the same situation and find the issue:
https://github.com/microsoft/vscode/issues/113869#issuecomment-780072904
I extract nvm load code to the condition function ref in the issue, solved this problem:
function load-nvm {
export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion" # This loads nvm bash_completion
[[ -s `brew --prefix`/etc/autojump.sh ]] && . `brew --prefix`/etc/autojump.sh
}
# nvm
if [[ "x${TERM_PROGRAM}" = "xvscode" ]]; then
echo 'in vscode, nvm not work; use `load-nvm`';
else
load-nvm
fi

Answer 2

Open VS Code from a terminal:
code .

Answer 3

Restarting VSCode on BigSur works for me.
You can also check your user settings to make sure it matches the path of the shell that your terminal uses.
Check https://code.visualstudio.com/docs/supporting/troubleshoot-terminal-launch for other troubleshooting steps.

Answer 4

OSX Work-around
Background
If VS Code is started via an OSX (or Linux) GUI interface and there's a shell rc process that takes more than 10 seconds to complete during start-up (e.g. nvm) VS Code simply stops trying to start-up that shell.
Work-around
The two known solutions are to either get rid of the process that takes more than 10 seconds or start VS Code from the command line (i.e. code .).
This work-around is for those of us on OSX who —for whatever reason— explicitly don't/can't get rid of the 10+ second process and who —again, for whatever reason— start VS Code via the GUI.
While the following is less desirable than VS Code just having a configuration that we can change, it's still better than having to remember to run code . from the terminal, and it's much, much better than not using nvm (or switching to an alternative).
Note: The file extension does need to be changed between .command and .app several times — this is not a mistake! ;)
Create a new file with the following:
#!/bin/sh
code .
Save the file with a .command extension in your "Applications" directory, e.g. ~/Applications/vs-code-cli-starter.command.
In a terminal, change that new file's permissions:
chmod +x fileName.command
From Finder, right click-on your new app/command and select "Get Info", then repeat with your actual VS Code application.
Drag the big icon from the "Preview" section of the actual VS Code's "Get Info" to the small icon in the upper-left of your newly created app/command's "Get Info".
Close the two "Get Info" panels.
In the "Applications" directory, update the file extension from .command to .app, e.g. vs-code-cli-starter.app.
Drag the newly created app's icon to your dock.
In the "Applications" directory, swap the file extension back from .app to .command, e.g. vs-code-cli-starter.command.
Enjoy

Answer 5

For Linux:
if [[ "$VSCODE_PID" = "" ]]; then
echo "slow or blocking operations"
fi
Thanks to Hemisu's answer.

Answer 6

For those who uses zsh, .ohmyzsh and powerlevel10k prompt:
Get all your exports EXCEPT export ZSH= and nvm stuff and put them in the bottom of .zshrc file.
Insert this line at the top: if [[ "$VSCODE_PID" = "" ]]; then
Before your exports at the bottom, insert an fi (end if)
Now, all your ohmyzsh, nvm and ohmyzsh themes are not loaded when VSCode initializes (the built in terminal still works fine, with ohmyzsh).
In my case, outside that if/fi there is only exports for PATH, LDFLAGS and CPPFLAGS.
Thanks to M Imam Pratama answer.

Answer 7

In Linux, you can open "alacarte" and make a new shortcut with the command "code" and click the box "Open in a terminal".

Answer 8

Go to project location and open with code . in terminal (if you are in linux) or cmd (if you are in windows.) That should resolve this issue.
When directly opened from vscode app it happens, even I have faced this.

Answer 9

it's a very common error or we can say complain by vs code
so here is the solution - do not open vs code directly from its icon or directly from application instead you can do is just open vs code from terminal/cmd obviously for linux/windows respectively by typing this command -> $ code .
if this command is not working then reinstall the vs code and check all the boxes before installing it will also allows you to open vs code from folder directly by clicking right side of mouse and just click open this folder with other application and select vs code.